Keep machinery running smoothly by monitoring its health and status from your computer. Often used with electric motors, pumps, and lathes, these kits measure changes in vibration and temperature—identifying equipment problems and potential failures before they occur. Plug in the sensor, set your thresholds, and view data directly on your screen. You’ll also receive email notifications when vibrations move beyond your specified range, making them good for preventative maintenance. These sensors are 20 times faster than our other vibration monitors, and they don’t require devices such as programmable logic controllers (PLCs) to operate.

Sensors mount directly to your equipment. Use the magnetic base for quick installation, or use the threaded hole for a more permanent setup. Once the sensor is hooked up, you can either wire it directly to the receiver or connect it to the wireless transmitter to view data remotely.

Kits with a USB connection link only to your computer for direct and easy monitoring.

Kits with an Ethernet connection can be configured to a wider network, transmit data over longer runs of cable, and integrate into other automated systems, such as a PLC.

Two easy-to-set dials allow you to adjust a set activation point for vibration as well as a time delay to avoid false triggering from start-up vibration. An LED alarm signals if the set activation point is exceeded. Plug the included cable into your data collector or programmable logic controller. IP67 rated for protection from dust and temporary submersion.

Use an optional magnetic base for temporary mounting or a glue-on base for more permanent mounting.

A built-in display makes it easy to view vibration levels, warnings, and the status of these switches. Use the push-buttons to set and adjust activation points for vibration as well as a start delay to avoid false triggering from start-up vibration. Memory storage captures readings at regular intervals, which lets you analyze your process. These switches have a 5-pole M12 plug that connects to cables with a socket (sold separately), so you can quickly connect and disconnect them. They are IP67 rated for protection from dust and brief submersion. Switches meet American, Canadian, and European safety standards. They also meet ISO standards for vibration monitoring.

Use Nano M8/USB adapter cords to connect these switches to your computer.

Use a magnetic base for temporary mounting or a glue-on base for more permanent mounting.

Get NEMA 4 and IP66 protection from dirt and water. Switch is rated for hazardous locations for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G. If vibration or shock exceeds a set activation point, the contacts actuate to either shut down your machine or activate an alarm. Reset the switch with the push of a button. The activation point is adjustable between 0 to 5 gravity units (g) at 0 to 60 Hz.

Keep these meters on hand to quickly check the health of your machine and bearings. They digitally measure acceleration, frequency, and speed to help you identify potential problems, such as bearings that are off balance or misaligned. These meters have two different bases for taking readings. The magnetic base is useful for hands-free readings on magnetic surfaces. For nonmagnetic surfaces, use the pin tip and gently hold the meter against the vibrating surface. Rated IP65, these meters will continue to measure in dusty and damp workspaces.

Set includes one meter for low-speed vibration and one meter for higher speed vibration. A flexible steel wire reed detects vibration while the scale on the side of the meter indicates the machine vibration in cycles per minute (cpm). A simple calculation determines motor speed in rpm for engines with multiple cycles.

In addition to measuring vibration, you can listen to and record machine performance. The magnetic base allows you to mount the probe on a machine for constant readings.

In addition to vibration, these meters measure acceleration, frequency, speed, displacement, and temperature. Use them to gauge the health of your bearings and machines. Onscreen analytics allow you to instantly check the condition of your equipment. These meters store up to 3,500 readings in memory, and you can transfer them to your computer with a USB cord (not included) to track trends.

Import regulations restrict sales to the listed areas.

Add a probe to take measurements in hard-to-access areas. It has a magnetic base you can mount to a machine to get constant readings.

Monitor the health of pumps, engines, and other rotating equipment from your wireless device. These battery-powered sensors measure speed, acceleration, and temperature to help identify potential problems related to balance, alignment, and lubrication. Good for daily maintenance checks, they're battery powered and magnetic, so you can stick them on a machine, take a reading, and move to the next machine. They send readings using Bluetooth, which you can review in the field or offsite.

Install the app on your device and create profiles for multiple pieces of equipment—once created, you won’t have to enter information each time you want to do a maintenance check. Based on your machine profiles, the app will set default alarm thresholds. It will also recommend courses of action.

Sensors and replacement chargers cannot be sold to certain regions due to local energy efficiency regulations.

Mount these sensors to robot arms, cranes, and vehicles to accurately track their movements. Also known as inertial measurement units (IMUs), they hold sensors for attitude, angular velocity (rotation speed), and acceleration in a housing about the size of a hockey puck. As your machine moves, these sensors send data to vehicle systems and computers in real time using SAE J1939 protocols. They can trigger on-board safety systems, which alert operators to dangerous conditions, adjust a vehicle’s path to avoid accidents, and keep machines working in safe zones. Use these sensors right out of the box with the standard settings or customize them for specific applications with the included software. They’re rated IP67 and IP69K to hold up to dirty, dusty environments and washdowns with hot, high-pressure water.