Filter by
Impact Strength Rating
DFARS Compliance
About Plastic
More
Wear-Resistant Easy-to-Machine Acetal Film
- Color: Semi-Clear White or Opaque Black
- Temperature Range: -20° to 180° F
- Tensile Strength: 6,280 psi (Good)
- Impact Strength: 3.66 ft.-lbs./in. (Good)
- Hardness: Not Rated (Hard)
- For Use Outdoors: No
- Specifications Met: See Table
Protect surfaces from wear with this thin and conformable acetal copolymer film. It has a naturally slippery surface and is wear resistant. This film is matte on one side and glossy on the other.
For technical drawings and 3-D models, click on a part number.
| Thick. | Thick. Tolerance | Color | Specifications Met | Each | |
11" × 12" | |||||
|---|---|---|---|---|---|
| 0.01" | -0.001" to 0.001" | Opaque Black | __ | 00000000 | 000000 |
11" × 24" | |||||
| 0.01" | -0.001" to 0.001" | Opaque Black | __ | 00000000 | 00000 |
12" × 12" | |||||
| 0.003" | -0.0003" to 0.0003" | Semi-Clear White | FDA Compliant 21 CFR 177.2470 | 0000000 | 00000 |
| 0.005" | -0.0005" to 0.0005" | Semi-Clear White | FDA Compliant 21 CFR 177.2470 | 0000000 | 00000 |
| 0.01" | -0.001" to 0.001" | Semi-Clear White | FDA Compliant 21 CFR 177.2470 | 0000000 | 00000 |
| 0.02" | -0.002" to 0.002" | Semi-Clear White | FDA Compliant 21 CFR 177.2470 | 0000000 | 00000 |
12" × 24" | |||||
| 0.003" | -0.0003" to 0.0003" | Semi-Clear White | FDA Compliant 21 CFR 177.2470 | 00000000 | 00000 |
| 0.005" | -0.0005" to 0.0005" | Semi-Clear White | FDA Compliant 21 CFR 177.2470 | 00000000 | 00000 |
| 0.01" | -0.001" to 0.001" | Semi-Clear White | FDA Compliant 21 CFR 177.2470 | 00000000 | 00000 |
13" × 12" | |||||
| 0.02" | -0.002" to 0.002" | Opaque Black | __ | 00000000 | 00000 |
24" × 24" | |||||
| 0.003" | -0.0003" to 0.0003" | Semi-Clear White | FDA Compliant 21 CFR 177.2470 | 00000000 | 00000 |
24" × 48" | |||||
| 0.003" | -0.0003" to 0.0003" | Semi-Clear White | FDA Compliant 21 CFR 177.2470 | 00000000 | 000000 |
Wear-Resistant Easy-to-Machine Acetal Sheets and Bars
- Color: White or Black
- Temperature Range: -20° to 180° F
- Tensile Strength: 9,135-9,700 psi (Good)
- Impact Strength: 1-1.5 ft.-lbs./in. (Poor)
- Hardness: Rockwell R120 (Hard)
- For Use Outdoors: No
- Specifications Met: ASTM D6100, FDA Compliant 21 CFR 177.2470
An economical alternative to Delrin® acetal resin, these acetal copolymer sheets and bars offer the same naturally slippery surface and similar wear resistance. They resist expanding when exposed to heat and moisture, so they can be machined to close tolerances. Use them for parts that require precision, such as gears, bearings, and bushings.
For technical drawings and 3-D models, click on a part number.
Sheets
White | Black | ||||
|---|---|---|---|---|---|
| Thick. | Thick. Tolerance | Each | Each | ||
12" × 12" | |||||
| 1/32" | -0.009" to 0.009" | 00000000 | 00000 | 00000000 | 00000 |
12" × 24" | |||||
| 1/32" | -0.009" to 0.009" | 00000000 | 00000 | 00000000 | 00000 |
12" × 48" | |||||
| 1/32" | -0.009" to 0.009" | 00000000 | 00000 | 00000000 | 00000 |
24" × 24" | |||||
| 1/32" | -0.009" to 0.009" | 00000000 | 00000 | 00000000 | 00000 |
24" × 48" | |||||
| 1/32" | -0.009" to 0.009" | 00000000 | 00000 | 00000000 | 00000 |