We will reply to your message within an hour.
When space is at a premium choose these compact fittings.
When space in your pipe line is limited, choose these miniature fittings that are one inch or less in length.
Less than an inch in length, these miniature fittings work well in low-pressure pipe lines that are tight on space.
Their small size makes these miniature fittings a good choice for cramped, confined spaces.
Connect these fittings to Schedule 40 plastic pipe—they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.
Made of corrosion-resistant plastic, these fittings won’t deteriorate when used in oil applications. They have high strength and impact resistance.
Distribute air or fluid to multiple locations from a single supply source with these manifolds. They are also known as headers.
A great solution when space is at a premium, these manifolds are less than an inch in height, yet allow you to supply up to 12 lines from one distribution point.
Use these junction blocks to organize and separate multiple lines in your system. They have threaded holes that allow air or fluid to flow straight through the block.
A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included.
Made of nickel-plated brass, these fittings have better corrosion resistance than unplated brass fittings.
Made of brass, these fittings have good corrosion resistance.
A 316 stainless steel body gives these fittings the best corrosion resistance of all our metal push-to-connect tube fittings.
These fittings won’t absorb moisture, so they’re good for water and high-humidity air applications.
Ball bearings allow these fittings to rotate 360°, even after they are tightened. They have a special seal that reduces friction to allow for continuous rotation.
Barbs grip onto tubing.
Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.
Monitor flow with these clear fittings.
Fittings have good corrosion resistance.
Aluminum fittings have good corrosion resistance, but are lighter in weight than brass.
The nickel plating on these fittings provides better corrosion resistance than unplated brass fittings.
Color-code fittings for easy identification. These aluminum fittings have good corrosion resistance, but are lighter in weight than brass.
Made of stainless steel, these fittings have better corrosion resistance than brass fittings.
Made of plastic, these couplings are lighter in weight than metal quick-turn couplings.
These brass couplings have good corrosion resistance.
Made of stainless steel, these couplings stand up to wet environments.
These fittings include a nut with a built-in sleeve (ferrule), so there’s no need to remove the nut for assembly.
Lighter in weight than metal quick-disconnect couplings, these couplings are plastic.
With no latch, these couplings have a compact design to fit in small spaces. They can handle pressures up to 700 psi.
Made of FDA listed materials, these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.
Fittings are 316 stainless steel, which has excellent chemical resistance and is more durable than plastic.
Fittings have a barb that grips onto tubing. Use in applications up to 120 psi.
Metal hose fittings have better durability than plastic barbed hose fittings.
Made of stainless steel, these hose fittings are more durable than plastic barbed hose fittings and have excellent corrosion and chemical resistance. Slide the barbed end into hose and secure with a clamp.
Change thread sizes or types, such as fine to coarse threads, on parts without changing gender.
Change inch threads to metric with these adapters, or swap metric threads for inch. An external hex lets you tighten or loosen them with a wrench.
Connect male- and female-threaded parts of different thread types and sizes, while allowing air, liquids, wire, or other thin materials to pass through.
Need to join two female-threaded parts, such as coupling nuts, with dissimilar inch thread sizes? Attach them to these adapters and tighten the exterior hex nut for a secure connection.
One side inch, one side metric, and a hex in the middle—these handy fasteners connect two female-threaded parts, such as coupling nuts, adapting from inch threads to metric. Tighten with a standard wrench.
Join two female-threaded parts of various thread types and sizes, while allowing air, liquids, wire, or other thin materials to pass through.
Connect two differently sized male-threaded parts, such as threaded rods, and tighten with a standard wrench.
Adapt threaded rods from inch to metric. These adapters connect two male-threaded fasteners, so you can change the gender of a mating part or increase or decrease its thread size. The hex-shaped body fits into the head of a standard wrench.
Often called sleeve nuts, these thread adapters fasten parts with right-hand threads to parts with left-hand threads.
Made of 18-8 stainless steel, these inserts have better corrosion resistance than black-phosphate steel.
A black-phosphate finish provides mild corrosion resistance.
These inserts are the most corrosion-resistant thread-locking inserts we offer.
These assortments include various sizes of thread-locking inserts.
A closed-end tap, drill bit, and installation bit are included with these inserts.
Adhesive on both the internal and external threads keeps these inserts in place and holds screws tight.
Made of 18-8 stainless steel, these inserts have good corrosion resistance.
These inserts are made to stringent military specifications.
The strongest key-locking inserts we offer, these inserts are made to stringent military specifications.
Forming the strongest hold of any of our threaded inserts, these inserts have a distorted internal thread to lock screws into place and keys that drive into surrounding material to prevent slipping and rotating.
These inserts come with an installation tool. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts.
Position components in assemblies, as well as separate or connect parts with these standoffs.
Square weld nuts have more weld points than hex weld nuts for a stronger hold. Use them on flat surfaces.
Weld these nuts to flat and uneven uncoated steel surfaces for a strong permanent hold.
Irregularly shaped threads in these nuts form a tight grip, preventing screws from backing out in vibration-heavy environments.
Install threads in channels and other tight spaces where round-base weld nuts won’t fit.
Projections on the base of these steel nuts concentrate your weld and create room for heat to dissipate, protecting threads from deforming. Weld them to uncoated steel channels and other tight spaces where round-base weld nuts won't fit.
Weld these nuts to stainless steel surfaces.
Projections on the base of these nuts concentrate your weld and create room for heat to dissipate, protecting threads from deformation. Made of 18-8 stainless steel, these nuts withstand mild chemicals and can be used in wet and outdoor environments.
With a slim base and a short barrel, these weld nuts fit in tight spaces, such as channels, and in low-clearance areas.
Projections on the base concentrate the weld and create space for heat to dissipate, protecting the threads on these weld nuts from deforming. Made of 18-8 stainless steel, they withstand mild chemicals and can be used in wet and outdoor environments.
With a slim base and a short barrel, these corrosion-resistant weld nuts fit in tight spaces and in low-clearance areas.
Projections on the base concentrate the weld and create space for heat to dissipate, protecting the threads on these steel weld nuts from deforming.
Add a pair of same-size threads to sheet metal while only welding once.
An offset barrel allows you to position threads near edges and corners.
To protect their threads from deforming, these steel nuts have a projection that concentrates your weld and creates room for heat to dissipate. An offset barrel lets you position threads near the edges and corners of uncoated steel sheets.
A smooth base provides more contact with the mating surface than weld nuts with projections.
Projections on the base concentrate the weld and provide room for heat to dissipate.
Threads float inside the retainer so you can install a bolt at a slight angle to align with off center parts.
Install strong, permanent threads in sheet metal to create a 90° joint.
Install corrosion-resistant threads in sheet metal to create a 90° joint.
Weld these nuts to round uncoated metal tubes to attach threaded parts, such as rod ends.
Use these tube-end weld nuts with left-hand threaded fasteners.
When the size or thread type of a fitting doesn't match an existing opening, use these adapters to make the connection.
Connect these orifices to threaded pipe, or insert them into threaded holes.
Open and close these valves with the flip of the toggle switch. They’re often used for equipment testing and gas sampling. All have threads and a hex nut below the handle for installation in instrument panels. Use with water, oil, air, and inert gas.
Well-suited for damp environments, these control cables have stainless steel fittings for excellent corrosion resistance. Pair them with a knob or lever to operate valves, throttle controls, and HVAC damper controls from a distance. They're flexible for weaving around obstructions.
Pair these cables with a knob or lever to operate valves, throttle controls, and HVAC damper controls from a distance. They're flexible for weaving around obstructions.
A splined core limits contact points on the cable’s liner, so the core slides back and forth smoothly and keeps the cable from twisting. Pair these cables with a knob or lever to operate valves, throttle controls, and HVAC damper controls from a distance. They're flexible for weaving around obstructions.
Similar to the brake cable on a bicycle, these cables exert pulling force so you can control components such as latches, release valves, and brakes.