We will reply to your message within an hour.
Use these fittings in extreme-pressure conditions up to 15,000 psi.
These brass fittings have the strength to handle high-pressure applications.
These fittings are strong enough to handle extreme pressures, yet small enough to fit into cramped spaces.
Distribute air or fluid to multiple locations from a single supply source with these manifolds. They are also known as headers.
When you’re short on vertical space, these manifolds are a good fit—they have outlets on the side instead of on top, so they have a lower profile than rectangular manifolds. Use them to distribute air or fluid to five locations from a single supply source.
Instead of a metal sleeve (ferrule), these fittings have a rubber sleeve that cushions tubing and absorbs vibration to maintain a tight seal, even when connected to large pumps.
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on steel tubing that is flared to 37°.
The external hex bolt on these fittings allows for easy installation in cramped spaces.
A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal.
Made of nickel-plated brass, these fittings have better corrosion resistance than unplated brass fittings.
Use at pressures up to 250 psi.
Use at pressures up to 150 psi.
Barbs grip onto tubing.
Metal hose fittings have better durability than plastic barbed hose fittings.
Fittings have sharp barbs that grip push-on hose with no clamps or ferrules required. The more you pull on the fittings, the tighter the hose will grip. Use in low-pressure hydraulic applications up to 350 psi.
These metal hose fittings have better durability than plastic barbed hose fittings. They are 316 stainless steel for excellent corrosion and chemical resistance. Slide the barbed end into hose and secure with a clamp.
Attach these fittings to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.
Change inch threads to metric with these adapters, or swap metric threads for inch. An external hex lets you tighten or loosen them with a wrench.
In addition to joining male- and female-threaded parts, these adapters can increase or decrease metric thread sizes and change the thread pitch.
One side inch, one side metric, and a hex in the middle—these handy fasteners connect two female-threaded parts, such as coupling nuts, adapting from inch threads to metric. Tighten with a standard wrench.
Twist these adapters onto female metric threads to change pitch or switch thread sizes.
Adapt threaded rods from inch to metric. These adapters connect two male-threaded fasteners, so you can change the gender of a mating part or increase or decrease its thread size. The hex-shaped body fits into the head of a standard wrench.
Increase or decrease metric thread size from one male-threaded part to another. Commonly used to connect two differently sized threaded rods, they have a hex-shaped body, so you can tighten them with a standard wrench.
Often called sleeve nuts, these thread adapters fasten parts with right-hand threads to parts with left-hand threads.
Made of 18-8 stainless steel, these inserts have better corrosion resistance than black-phosphate steel.
A black-phosphate finish provides mild corrosion resistance.
These inserts are the most corrosion-resistant thread-locking inserts we offer.
These assortments include various sizes of thread-locking inserts.
Made of 18-8 stainless steel, these inserts have good corrosion resistance.
The strongest key-locking inserts we offer, these inserts are made to stringent military specifications.
Forming the strongest hold of any of our threaded inserts, these inserts have a distorted internal thread to lock screws into place and keys that drive into surrounding material to prevent slipping and rotating.
These inserts come with an installation tool. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts.
Weld these metric nuts to flat and uneven uncoated steel surfaces for a strong permanent hold.
You can weld these metric nuts to flat and uneven uncoated stainless steel surfaces for a strong permanent hold.
Square weld nuts have more weld points than hex weld nuts for a stronger hold. Use them on flat surfaces.
Attach conduit to a knockout in an outlet box or enclosure.
These adapters provide electromagnetic interference (EMI) protection when connecting shielded flexible plastic conduit to a knockout in an outlet box or enclosure.
When the size or thread type of a fitting doesn't match an existing opening, use these adapters to make the connection.
Rated for high load capacity, use these metric inserts to connect threaded leveling mounts to heavy equipment.