We will reply to your message within an hour.
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.
For quick repairs, these epoxies begin to harden in 6 minutes or less.
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.
For invisible bond lines, these adhesives dry clear.
Bond most materials without the strong odor of other epoxy adhesives.
These self-extinguishing epoxies meet UL 94 V-0 for flame retardance.
With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.
Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.
Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives.
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.
Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
Solvents, oils, acids, and other chemicals won't degrade the bond of these adhesives.
With excellent shear strength, these acrylics form bonds at least 25% stronger than standard acrylic structural adhesives.
To keep these adhesives from squeezing out during clamping and give a consistent bond thickness, they're mixed with small glass beads.
No need to mix these acrylics—apply adhesive to one surface and activator to the other, then bring surfaces together to bond.
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.
Bond glass and stone to drywall, treated lumber, and subfloors.
Install building materials such as wood and drywall with these general purpose adhesives.
Install foam insulation, drywall, and paneling with these adhesives.
Adhere vinyl and rubber wall bases to wood, drywall, and concrete.
Use these adhesives to bond lumber and plywood.
Bond and repair nosing and stair treads with this thick, two-part epoxy.
Bond plastics, porous materials, or dirty surfaces.
These super glues are blended with rubber for better impact and moisture resistance than other instant-bond adhesives.
Use these thick gels, also known as super glue, on vertical surfaces or to fill gaps between parts.
These kits include adhesives, applicators, and mixer nozzles.
Permanently set threaded rods, studs, and rebar in concrete.
When concrete is saturated or submerged in water, use these adhesives to form strong bonds.
These adhesives maintain their strength at temperatures up to 250° F.
When appearance is important, this cement dries clear and forms strong bonds on acrylic.
The polyurethane glue in these cartridges has nearly twice the shear strength of other hot-melt adhesives.
To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge.
Fill these cartridges with the two-part adhesive of your choice.
Fill these cartridges with one-part adhesive.
Thread these holders onto a gun to hold an adhesive cartridge.
A quick disconnect bayonet connection attaches these holders to a gun to hold an adhesive cartridge in place.
Made from silicone, these sealants are RTV (room-temperature vulcanizing).
These sealants include a material certificate with traceable lot number, test report, and product shelf life.
Resistant to mold and mildew, these sealants are well suited to high-humidity environments.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum.
This sealant includes a material certificate with traceable lot number, test report, and product shelf life.
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.
Apply these sealants in cold temperatures, on wet surfaces, and even through running water.
Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.
A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.
Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics.
Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.
Also known as neutral cure, this sealant won't discolor copper, brass, plastic, and concrete.
Made from silicone, these sealants are RTV (room-temperature vulcanizing). They combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
Make temporary waterproof seals that peel off when no longer needed.
Mix a small amount of water-based paint with this caulk to match the color of your surface.
The strongest submersible sealants we offer, these combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.
Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.
Make tough, flexible, oil-resistant seals.
Prevent sound from passing through gaps and joints where walls, floors, and ceilings meet using these sealants to fill them.
Designed to withstand extreme environments, these fluoroelastomer sealants have excellent resistance to harsh chemicals. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Seal leaks on vacuum systems and components.
Let compressed air do the work for you when dispensing sealants from cartridges.
Adjust air-flow for precise control and smooth material flow—these guns have a built-in pressure regulator with a control knob.
These flexible extensions add length and bend 180° to get into hard-to-reach areas.
Unlike standard caulk guns, these guns measure just 4" long and don’t have a cartridge rod, so you can use them in snug spaces and around tight corners.
Minimize mess and waste—when you release the handle on these guns, the rod retracts a bit to stop flow automatically.
Power without a cord means you can take these sealant-dispensing guns wherever you need them.
Dispense sealants from cartridges with ease and control.
Achieve the perfect bead every time.
Dispense sealants packaged in sausage packs.
Dispense caulk from sausage-pack guns.
Keep sealants, caulk, and adhesives easy to dispense in cold weather.
Immerse the nozzle in the sealant and pull back the rod to fill.
Dispense caulk from bulk-load guns.
Seal joints and gaps in concrete.
The textured finish matches concrete surfaces.
Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.
Designed for use on ovens and kilns, these sealants form a durable, rock-hard seal after firing.
Make seals that support glass under heavy loads in equipment and buildings.
Repair equipment and vehicle windows with these sealants that are rated to withstand impact within three hours of application.
Also known as glazing compounds, use these sealants to install glass in aluminum, steel, and wood framing.
These sealants don't degrade in sunlight.
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Fix roof leaks in cold and wet conditions. These sealants can even be applied underwater.
These sealants come in bottles, cans, and tubes so you can choose the quantity that covers your application.
Seal metal-to-metal joints in ductwork.
Form flexible water-resistant seals on metal, plastic, and rubber joints in heating, ventilation, air conditioning, and refrigeration applications.
The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.
No mixing required—these potting compounds come ready to apply.
Clear enough to read through, this UV-resistant potting compound allows optimal light transmission for use with LEDs, solar cells, and fiber optics.
Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation.
This potting compound is formulated for use in sensitive applications such as manufacturing semiconductors.
Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds.
Thinner than potting compounds, these rigid and wear-resistant coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards.
This coating is formulated for use in sensitive applications such as manufacturing semiconductors.
Fill cracks up to 10" deep on vertical and overhead surfaces.
Fill cracks up to 4" deep on horizontal surfaces, such as floors and sidewalks.
Fill cracks in horizontal, vertical, and overhead concrete surfaces.
Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.
Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink.
Able to withstand temperatures up to 2300° F, these ceramic surface fillers are often used as thermal insulation on brick, mortar, burner blocks, furnace holders, and thermocouples.
Use these two-part fillers to rebuild cracked or worn plastic surfaces.
These patching compounds are the most flexible and watertight we offer.
Repair worn and torn rubber parts. These two-part fillers are self leveling and form a tough, flexible new surface. They're often used with conveyor belts, mill liners, and pumps.
Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal.
Use cartridges with a standard caulk gun for quick and easy dispensing.