Adhesive Lock Washers | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Hardness Hardness

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

DFARS Specialty Metals
Compliant

	Height Height

	For Hole Diameter For Hole Diameter

	Working Load Working Load

10,000 lbs. or greater

	Disc Spring Type Disc Spring Type


Wave	Belleville

Flat	Curved

Notched	Finger

	Compressed Height @ Working Load Compressed Height @ Working Load

	Deflection @ Working Load Deflection @ Working Load

	Overall Height Overall Height

3,571 Products

Lock Washers

Split Lock Washers

As a screw is tightened, these washers flatten to add tension to the joint, counteracting fatigue around the joint from small amounts of vibration.

Metric Split Lock Washers

As a screw is tightened, these metric washers flatten to add tension to the joint, counteracting fatigue around the joint from small amounts of vibration.

Mil. Spec. Split Lock Washers

Choose these washers for their adherence to strict military standards for material and construction.

Split Lock Washers for Socket Head Screws

Also known as high-collar lock washers, these have a smaller outside diameter than standard split lock washers to fit neatly under socket head cap screws.

Metric Split Lock Washers for Socket Head Screws

Also known as high-collar lock washers, these metric washers have smaller outside diameters than standard split lock washers to fit neatly under socket head cap screws.

Oversized Split Lock Washers

Compared to standard split lock washers, these are thicker and have larger outside diameters.

Internal-Tooth Lock Washers

Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with fasteners that have small heads, such as fillister and cheese head screws.

Metric Internal-Tooth Lock Washers

Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with metric fasteners that have small heads, such as fillister and cheese head screws.

Mil. Spec. Internal-Tooth Lock Washers

Choose these washers for their adherence to strict military standards for material and construction.

Internal-Tooth Lock Washers for Soft Material

Slightly domed with an oversized outside diameter, these washers distribute your fastener's load over a larger surface area than other internal-tooth lock washers to limit damage to soft material.

External-Tooth Lock Washers

Teeth on the outside edge of the washer bite into the screw head and joint for a tight grip.

Metric External-Tooth Lock Washers

Teeth on the outside edge of these metric washers bite into the screw head and joint for a tight grip.

Mil. Spec. External-Tooth Lock Washers

Choose these washers for their adherence to strict military standards for material and construction.

Tight-Grip External-Tooth Lock Washers

The teeth on these washers bite further into the screw head and joint than standard external-tooth washers to provide a stronger hold.

Countersunk External-Tooth Lock Washers

The teeth on these washers firmly grip heads of 82° flat head countersunk screws.

Countersunk Tight-Grip External-Tooth Lock Washers

To keep 90° countersunk screws from loosening in vibration applications, the teeth on these washers bite further into the screw head and joint than standard external-tooth lock washers for a more secure hold.

Internal-/External-Tooth Lock Washers

The combination of internal and external teeth boosts gripping power to maintain a tight hold and provide more vibration resistance than other tooth lock washers. Use with fasteners that have heads large enough to make contact with the external teeth, such as pan, button, and binding head screws.

Belleville Spring Lock Washers for Socket Head Screws

These washers have smaller outside diameters than standard spring lock washers to fit neatly under socket head cap screws.

Spring Lock Washers for Slotted Bearing Nuts

Designed for use with bearing nuts, these lock washers have a conical shape that presses like a spring against bearings, bushings, gears, and pulleys to hold them in place on your threaded shaft or spindle.

Belleville Spring Lock Washers

Also known as conical washers, these have a slightly cupped shape that gives them spring-like flexibility to grip tighter than split and tooth lock washers.

Metric Spring Lock Washers

The arched shape of these washers presses up against a bolt and down against a nut to prevent loosening from wear, vibration, or temperature changes.

Spring Lock Washers for Plastic Screws

Designed for use with plastic screws, these acetal washers are good electrical insulators. They are excellent for use under water and in rotating assemblies.

Wedge Lock Washers

Comparable to NORD-LOCK® or Sherex TEC Series washers, these two-piece washers provide more locking power than split, tooth, and spring lock washers. Wedges on the inside lock the two pieces together, and serrations on the exterior grip surfaces to resist loosening from high vibration and shifting.

Tab Lock Washers

Bend one tab against the side of the mounting surface and the other tab against the flats on a bolt or nut to prevent both the fastener and washer from turning and loosening in high-vibration applications, such as a motor mount.

Metric Tab Lock Washers

Bend the tab on these metric lock washers to prevent the fastener and washer from turning and loosening due to vibration.

Lock Washers for Square-Neck Bolts

Designed for use with square-neck bolts such as carriage bolts, these washers have teeth that dig into wood and other soft material to prevent rotation.

Coil Lock Washers

Keep tension when fastening materials prone to expanding and contracting, such as wood. The coil of these washers prevents nuts and bolts from loosening.

Washers

Adhesive-Back Washers

Peel the backing off these washers and stick them onto a surface for easy mounting and assembly.

Angled-Edge Washers for
Toggle Clamp Holding Screws

Use on clamps with open arms to keep the holding screw in place.

Oversized Washers for Wood

Prevent screws from sinking into wood—these washers have a large OD.

Washers for Square-Neck Bolts

A square hole prevents these washers from turning with the bolt or shaft.

Lock Washer Assortments

Tooth Lock Washer Assortments

Teeth bite into the joint for a tighter grip than split lock washers.

Split Lock Washer Assortments

As a screw is tightened, these washers flatten to add tension to the joint and prevent loosening from small amounts of vibration.

Shims

Peel-Away Layered Ring Shims

These shims are made of layers of metal bonded with adhesive. Remove layers with a utility knife until you get the thickness you need.

Made-to-Order Peel-Away Layered Shims

Send us a drawing, and we'll cut your custom shim. Shims are made of layers of metal bonded with adhesive; remove layers with a utility knife until you get the thickness you need.

Disc Springs

Wave Disc Springs

Use these high-carbon steel springs in noncorrosive environments.

Corrosion-Resistant Wave Disc Springs

Made of stainless steel, these springs are more corrosion resistant than steel wave disc springs.

Stacked Wave Disc Springs

Multiple rows of waves allow these springs to handle higher loads than standard wave disc springs.

Corrosion-Resistant Stacked Wave Disc Springs

Made of 17-7 PH stainless steel with multiple rows of waves, these springs are more corrosion resistant than steel springs and handle greater loads than standard wave disc springs.

Split Wave Disc Springs

A gap allows these springs to compress without widening, so they won't bind or deform when used inside a housing with tight clearance.

Belleville Disc Springs

Use these steel springs in noncorrosive environments.

Corrosion-Resistant Belleville Disc Springs

Made of stainless steel, these springs are more corrosion resistant than steel springs. Use them on shafts, bolts, and the ends of valves to maintain tension and separate components.

Extreme-Temperature Belleville Disc Springs

These springs withstand temperatures from -400° to 1100° F. All are 718 nickel, a high-strength, corrosion-resistant alloy that's also known as Inconel.

Mil. Spec. Belleville Disc Springs

These springs meet MIL-W-12133.

Belleville Disc Springs for Ball Bearings

Install these springs, also known as bearing preload washers, against ball bearings to reduce noise and unwanted movement along the shaft.

Belleville Disc Springs for Flange Bolts

Keep pipe flange connections sealed during demanding applications. When installed under flange bolt heads, these springs compensate for shock loads, vibration, and thermal expansion and contraction.

Flat Disc Springs

These flat rubber springs handle heavy loads, similar to Belleville disc springs, and resist oxidation, oil, and abrasion.

Corrosion-Resistant Curved Disc Springs

Made of stainless steel, these springs are more corrosion resistant than steel springs.

Curved Disc Springs

Use these high-carbon steel springs in noncorrosive environments.

Notched Disc Springs

Notches make these springs more flexible than Belleville disc springs and allow liquid to flow around the spring, even while it's in use.

Finger Disc Springs

Raised tabs, known as fingers, enable these springs to compress without widening, so they won't bind or deform in housings with little clearance. Use with ball bearings in precision and high-speed drive assemblies to reduce noise, vibration, and wear.

Multi-Pole Neodymium Magnets with Unthreaded Hole

Many small poles give these magnets shallower, more concentrated magnetic fields that hold especially well on thin material.

Lock Washers

Split Lock Washers

Metric Split Lock Washers

Mil. Spec. Split Lock Washers

Split Lock Washers for Socket Head Screws

Metric Split Lock Washers for Socket Head Screws

Oversized Split Lock Washers

Internal-Tooth Lock Washers

Metric Internal-Tooth Lock Washers

Mil. Spec. Internal-Tooth Lock Washers

Internal-Tooth Lock Washers for Soft Material

External-Tooth Lock Washers

Metric External-Tooth Lock Washers

Mil. Spec. External-Tooth Lock Washers

Tight-Grip External-Tooth Lock Washers

Countersunk External-Tooth Lock Washers

Countersunk Tight-Grip External-Tooth Lock Washers

Internal-/External-Tooth Lock Washers

Belleville Spring Lock Washers for Socket Head Screws

Spring Lock Washers for Slotted Bearing Nuts

Belleville Spring Lock Washers

Metric Spring Lock Washers

Spring Lock Washers for Plastic Screws

Wedge Lock Washers

Tab Lock Washers

Metric Tab Lock Washers

Lock Washers for Square-Neck Bolts

Coil Lock Washers

Washers

Adhesive-Back Washers

Angled-Edge Washers forToggle Clamp Holding Screws

Oversized Washers for Wood

Washers for Square-Neck Bolts

Lock Washer Assortments

Tooth Lock Washer Assortments

Split Lock Washer Assortments

Shims

Peel-Away Layered Ring Shims

Made-to-Order Peel-Away Layered Shims

Disc Springs

Wave Disc Springs

Corrosion-Resistant Wave Disc Springs

Stacked Wave Disc Springs

Corrosion-Resistant Stacked Wave Disc Springs

Split Wave Disc Springs

Belleville Disc Springs

Corrosion-Resistant Belleville Disc Springs

Extreme-Temperature Belleville Disc Springs

Mil. Spec. Belleville Disc Springs

Belleville Disc Springs for Ball Bearings

Belleville Disc Springs for Flange Bolts

Flat Disc Springs

Corrosion-Resistant Curved Disc Springs

Curved Disc Springs

Notched Disc Springs

Finger Disc Springs

Multi-Pole Neodymium Magnets with Unthreaded Hole

Multi-Pole Neodymium Magnets with Unthreaded Hole

Angled-Edge Washers for
Toggle Clamp Holding Screws