Install building materials such as wood and drywall with these general purpose adhesives.

Install foam insulation, drywall, and paneling with these adhesives.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Tested to meet ASTM E595, a standard used by NASA, these sealants fill joints and seams while releasing almost no volatile emissions that could damage sensitive electronics, even in a vacuum.

Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics.

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.

Thinner than non-sagging sealants, this sealant flows easily into cracks and has a smooth finish.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Made from silicone, these sealants are RTV (room-temperature vulcanizing). They combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

Also known as neutral cure, this sealant won't discolor copper, brass, plastic, and concrete.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

The strongest submersible sealants we offer, these combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.

Designed to withstand extreme environments, these fluoroelastomer sealants have excellent resistance to harsh chemicals. They’re non-sagging, so they won't drip from vertical and overhead surfaces.

Much thicker than sealants for fine threads, these sealants bridge the gaps between coarse threads.

Apply this thread sealant stick without a mess.

Apply this thread sealant stick without a mess.

PTFE provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start.

Formulated for high lubricity, these sealants allow easy assembly of finely threaded hydraulic and compressed air system components. They're also free of fillers that could contaminate system media.

For use in refrigeration systems and applications exposed to strong chemicals, these sealants have excellent solvent resistance.

Use color to identify water, gas, and chemical connections.

This tape contains nickel to prevent seizing and galling associated with stainless steel threaded connections. It’s also good for use with other metals.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Seal joints and gaps in concrete.

Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.

Press this pliable rope into place to hold glass in window frames and seal leaks.

Make seals that support glass under heavy loads in equipment and buildings.

These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

Seal metal-to-metal joints in ductwork.

For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers.

These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders.

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.

Stop leaks in metal tanks and equipment without draining the contents. Until a permanent repair can be made, rub these sticks into the leak to form a temporary seal.

Stop leaks in metal tanks and equipment without draining the contents.

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.

Make castings and fill voids with these two-part pourable epoxies.

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.

Everything you need to repair cracked, worn, and damaged surfaces—even underwater.

Mend rips, tears, and holes on vinyl surfaces, such as awnings and upholstery, with these flexible, waterproof surface fillers.

Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.

Repair worn and torn rubber parts. These two-part fillers are self leveling and form a tough, flexible new surface. They're often used with conveyor belts, mill liners, and pumps.

Fill cracks with these coatings to stop leaks and deaden sound.

These patching compounds are the most flexible and watertight we offer.

Roll out a fast fix for leaky roofs and gutters with these peel-and-stick rolls.

Fill cracks up to 10" deep on vertical and overhead surfaces.

Fill cracks up to 4" deep on horizontal surfaces, such as floors and sidewalks.

Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink.

Patch concrete floors and stairs with these compounds.

Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.

Not only do these leveling compounds withstand severe abrasion, wear, and impact, they also stand up to steel wheels and heavy blows without cracking.

These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.

Cut rope to the length you need, pack it in cracks up to 1" wide, and heat with a propane torch.

Spread patching compounds in dry, wet, and even water-filled holes.

Used for brick, block, and stone laying as well as for repairing masonry, mortar mixes consist of fine sand and masonry cement.

Press these putty-like fillers into cracks in wood up to 1/8" wide.

Keep the surface of your porcelain fixtures looking like new.

Ideal for use with sensitive electronics and optics, these coatings give off almost no volatile emissions and maintain a stable temperature. They’ve been tested to meet ASTM E595, a low-outgassing standard used by NASA.

Protect sensitive electronics at the molecular level—these ultra-thin, ultra-conformal coatings cover every inch of your components for applications where failure isn’t an option.

Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.

Protect sensitive electronic equipment from sparks, shorts, and sudden discharges. These acrylic-based coatings contain low-conductivity pigments to dissipate electric charge and prevent static buildup on your equipment.

Apply these coatings directly to rust to prevent it from spreading and to stop new rust from forming. Often used on containers, trailers, and in marine restoration, they create a durable, impact-resistant surface that permanently stops rust.

Use these coatings to form a water-resistant layer to restore and reinforce your roof.

Commonly used by electronics manufacturers and research labs, apply these coatings to floors and walls to protect equipment from static electricity buildup.