For quick repairs, these epoxies begin to harden in 6 minutes or less.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

For invisible bond lines, these adhesives dry clear.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.

No need to mix these acrylics—apply adhesive to one surface and activator to the other, then bring surfaces together to bond.

With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.

For easy positioning, these adhesives begin to harden only when exposed to light.

Moisture, humidity, and immersion in water won't degrade the bond of these adhesives.

Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.

Apply these adhesives on two surfaces, air dry, and then bring together to bond.

The 3M VHB adhesive on these rolls offers a strong hold that can replace rivets, spot welds, and other permanent fasteners.

Also known as Gorilla Glue, this glue expands to form stronger bonds than other glue.

Pull off a small piece of putty and stick lightweight objects to a surface.

These small tabs of pressure-sensitive adhesive offer convenient, no-mess bonding.

An alternative to solder, these flexible, silver-filled adhesives accommodate joint movement. Use them to bond electrical components and repair circuits.

Remaining flexible after curing, these glue sticks accommodate joint movement.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Tested to meet ASTM E595, a standard used by NASA, these sealants fill joints and seams while releasing almost no volatile emissions that could damage sensitive electronics, even in a vacuum.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.

Thinner than non-sagging sealants, this sealant flows easily into cracks and has a smooth finish.

With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Mix a small amount of water-based paint with this caulk to match the color of your surface.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Seal leaks on vacuum systems and components.

Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.

Press this pliable rope into place to hold glass in window frames and seal leaks.

Repair equipment and vehicle windows with these sealants that are rated to withstand impact within three hours of application.

These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.