For quick repairs, these epoxies begin to harden in 6 minutes or less.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

For invisible bond lines, these adhesives dry clear.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.

These self-extinguishing epoxies meet UL 94 V-0 for flame retardance.

No need to mix these acrylics—apply adhesive to one surface and activator to the other, then bring surfaces together to bond.

Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.

To keep these adhesives from squeezing out during clamping and give a consistent bond thickness, they're mixed with small glass beads.

With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene.

Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds.

These adhesives withstand temperatures of 390° F or more.

Make strong, instant bonds on a variety of materials—but not your skin.

Form bonds without the strong odor of other instant-bond adhesives.

Bond plastics, porous materials, or dirty surfaces.

These super glues are blended with rubber for better impact and moisture resistance than other instant-bond adhesives.

These adhesives withstand temperatures up to 480° F.

These thin liquids, also known as super glue, flow into small gaps.

For flexible bonds that resist cracking, these adhesives stay pliable.

Invisibly bond glass and transparent plastics.

Form bonds with twice the strength of our other spray adhesives.

For easy positioning, this adhesive remains tacky for hours. Once items are in place, apply pressure to create a permanent bond.

These adhesives resist temperatures up to 500° F.

The 3M VHB adhesive on these rolls offers a strong hold that can replace rivets, spot welds, and other permanent fasteners.

Attach EMI/RFI shields and gaskets to electronics housings—these rolls are loaded with conductive fibers.

Temporarily stabilize objects on flat surfaces with this clear, reusable adhesive.

Pull off a small piece of putty and stick lightweight objects to a surface.

These small tabs of pressure-sensitive adhesive offer convenient, no-mess bonding.

Stick tiles to your ceiling without worrying about them falling off or sagging.

Secure hardware on circuit boards while insulating current.

Remaining flexible after curing, these glue sticks accommodate joint movement.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Tested to meet ASTM E595, a standard used by NASA, these sealants fill joints and seams while releasing almost no volatile emissions that could damage sensitive electronics, even in a vacuum.

Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics.

Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Made from silicone, these sealants are RTV (room-temperature vulcanizing). They combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

Also known as neutral cure, this sealant won't discolor copper, brass, plastic, and concrete.

Press this adhesive-backed plastic tape into place for an immediate light-duty seal.

The strongest submersible sealants we offer, these combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.

Designed to withstand extreme environments, these fluoroelastomer sealants have excellent resistance to harsh chemicals. They’re non-sagging, so they won't drip from vertical and overhead surfaces.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Seal joints and gaps in concrete.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Press this pliable rope into place to hold glass in window frames and seal leaks.

Make seals that support glass under heavy loads in equipment and buildings.

Seal glass windows in metal and wood fire-rated doors.

These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.