Filter by
For Joining
For Use On
Color
Adhesive Type
Consistency
Begins to Harden
Manufacturer Model Number
Performance
Cure Type
Peel Strength
Container Size
Maximum Temperature
Clarity
Minimum Temperature
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Instant-Bond Adhesives for Hard-to-Bond Materials
 |
Join plastics that standard instant-bond adhesives can't grip. These adhesives stick to smooth materials, such as polyethylene and polypropylene. Clean and prepare the surface with primer so the adhesive can spread, dry, and gain strength.
Add an accelerator after the primer and before the adhesive to reach a full-strength bond faster.
Thick Liquid—Fill larger gaps than thin-liquid adhesives, so they're better for bonding slightly misaligned or uneven surfaces.
Mil. Spec.—Manufactured and tested to meet strict U.S. military standards for performance and reliability.
%20--%3e%3cg%3e%3cg%20id='Layer_1'%3e%3cpath%20class='cls-1'%20d='M68,27.2c-14.6,0-26.4,11.7-26.4,26.3,0,7,2.8,13.7,7.7,18.7v44.8l18.8-16.1,18.7,16.1v-44.9c10.3-10.3,10.3-27,0-37.3-5-4.9-11.7-7.7-18.7-7.7h0ZM81.3,105l-13.2-11.4-13.2,11.4v-28.7c8.2,4.8,18.3,4.8,26.5,0v28.7ZM76.2,70.8c-5.2,2.5-11.2,2.5-16.4,0-9.5-4.5-13.5-15.9-9-25.4,4.5-9.5,15.9-13.5,25.4-9,9.5,4.5,13.5,15.9,9,25.4-1.9,4-5.1,7.1-9,9Z'/%3e%3cpath%20class='cls-2'%20d='M5.8,95.5c-1.2,0-2.1-1-2.1-2.1,0,0,0,0,0,0V29.4h20.9c2.1,0,3.8-1.7,3.8-3.8V3.7c.2,0,.4,0,.5,0h37.5c1.2,0,2.1,1,2.1,2.1v18.6c1.2,0,2.5.1,3.7.3V5.8C72.2,2.6,69.6,0,66.4,0H28.9c-1.5,0-3,.6-4.1,1.7h-.1c0,.1-23,23.2-23,23.2-1.1,1.1-1.7,2.6-1.7,4.1v64.3c0,3.2,2.6,5.8,5.8,5.8h41.7v-3.7H5.8ZM24.7,7.1v18.7H6L24.7,7.1Z'/%3e%3c/g%3e%3c/g%3e%3c/svg%3e)
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, sec. | Reaches Full Strength, hr. | Consistency | Viscosity, cP | Max. Gap Size Filled | Temp. Range, ° F | Specs. Met | For Joining | Each | |||
Loctite® | ||||||||||||||
| 422 | 1 | Bottle | 30 | 24 | Thick Liquid | 2,250 | 0.008" | -65 to 180 | Fed. Spec. A-A-3097, MIL-A-46050 | Composite, Metal, Plastic, Rubber, Metal to Composite, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Rubber, Rubber to Composite | 74985A67 | 000000 | ||
Urethane Structural Adhesives
 |  |
Cartridge | Single-Use Packet |
 | |
Syringe |
Urethanes are the most flexible adhesives, so they bond dissimilar materials and damp vibration.
Some of these adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength | Shear, psi | Peel | Mix Ratio | Consistency | Viscosity | Temp. Range, ° F | For Joining | Pkg. Qty. | Pkg. | |||
3M | ||||||||||||||||
Scotch-Weld | ||||||||||||||||
| DP604NS | 1.64 | Cartridge | 4 | 6 hr. | 660 | 33 lbf/in. wd. | 1:1 | Thick Liquid | 1,950 cP | -60 to 250 | Composite, Metal, Plastic, Wood, Metal to Composite, Metal to Plastic, Plastic to Composite | 1 | 7467A19 | 000000 | ||
| DP605NS | 1.64 | Cartridge | 5 | 48 hr. | 660 | 33 lbf/in. wd. | 1:1 | Paste | 150,000 cP | -65 to 250 | Composite, Metal, Plastic, Wood, Metal to Composite, Metal to Plastic, Plastic to Composite | 1 | 7467A27 | 00000 | ||
Loctite® | ||||||||||||||||
| 5570 | 10.1 | Cartridge | 30 | 7 day | 400 | Not Rated | — | Paste | Not Rated | -40 to 200 | Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Rubber to Masonry, Wood to Glass | 1 | 6430A798 | 00000 | ||
J-B Weld | ||||||||||||||||
Plastic Bonder | ||||||||||||||||
| 50139 | 0.85 | Syringe | 6 | 1 hr. | 1,000 | Not Rated | 1:1 | Thick Liquid | 50,000 cP | -20 to 250 | Composite, Masonry, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Masonry, Plastic to Rubber, Rubber to Composite, Rubber to Masonry | 1 | 7605A6 | 0000 | ||
Other Structural Adhesives | ||||||||||||||||
| — | — | Single-Use Packet | 8 | 18 hr. | 400 | Not Rated | 1:1 | Thick Liquid | 4,000 cP | -40 to 150 | Composite, Glass, Metal, Plastic, Rubber, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Rubber, Rubber to Composite, Rubber to Glass | 10 | 7493A41 | 00000 | ||
Epoxy Structural Adhesives
| |
Cartridge | Syringe |
Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
7524A161 is solvent free. If the adhesive hardens in the tube, soften in warm water before dispensing.
Model Number 305-1/2—Do not contain solvents.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel, lbf/in. wd. | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | For Joining | Each | |||
Devcon | |||||||||||||||
2 Ton Epoxy | |||||||||||||||
| 14260 | 1.69 | Cartridge | 8 | 16 | 2,250 | 2 | 1:1 | Thick Liquid | 8,000 | -40 to 200 | Composite, Metal, Plastic, Metal to Composite, Metal to Plastic, Plastic to Composite | 66215A24 | 000000 | ||
| 14310 | 0.84 | Syringe | 8 | 16 | 2,250 | 2 | 1:1 | Thick Liquid | 8,000 | -40 to 200 | Composite, Metal, Plastic, Metal to Composite, Metal to Plastic, Plastic to Composite | 7541A77 | 00000 | ||
Lord | |||||||||||||||
| 305-1/2 | 1.69 | Cartridge | 60 | 48 | 2,240 | 84 | 1:1 | Thick Liquid | 23,250 | -30 to 250 | Composite, Glass, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Wood to Glass | 66195A31 | 00000 | ||
High-Strength Urethane Structural Adhesives
| |
Cartridge | Single-Use Packet |
| |
Syringe |
With the highest shear strength, these form the strongest bonds of our urethane adhesives.
Urethanes are the most flexible adhesives, so they bond dissimilar materials and dampen vibration.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, psi | Peel, lbf/in. wd. | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | For Joining | Pkg. Qty. | Pkg. | |||
3M | ||||||||||||||||
Scotch-Weld | ||||||||||||||||
| DP620NS | 1.64 | Cartridge | 20 min. | 48 hr. | 1,700 | 30 | 1:1 | Thick Liquid | 4,360 | -60 to 250 | Composite, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Rubber, Rubber to Composite | 1 | 7467A218 | 000000 | ||
| DP640 | 1.64 | Cartridge | 40 min. | 7 day | 1,960 | 64 | 1:1 | Thick Liquid | 30,000 | -65 to 250 | Composite, Masonry, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Masonry, Plastic to Rubber, Rubber to Composite, Rubber to Masonry | 1 | 7467A78 | 00000 | ||
Other Structural Adhesives | ||||||||||||||||
| — | 1.65 | Syringe | 60 sec. | 24 hr. | 1,950 | 65 | 1:1 | Thick Liquid | 30,000 | -45 to 250 | Composite, Glass, Metal, Plastic, Rubber, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Rubber, Rubber to Composite, Rubber to Glass | 1 | 7448A21 | 00000 | ||
| — | 1.65 | Syringe | 4 min. | 24 hr. | 2,050 | 65 | 1:1 | Thick Liquid | 30,000 | -45 to 250 | Composite, Glass, Metal, Plastic, Rubber, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Rubber, Rubber to Composite, Rubber to Glass | 1 | 7448A22 | 00000 | ||
| — | — | Single-Use Packet | 3 min. | 24 hr. | 1,715 | 62 | 1.28:1 | Thick Liquid | 10,000 | -40 to 170 | Composite, Glass, Metal, Plastic, Rubber, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Rubber, Rubber to Composite, Rubber to Glass | 10 | 7493A21 | 00000 | ||
| — | — | Single-Use Packet | 5 min. | 24 hr. | 2,280 | 10 | 1:1.1 | Thick Liquid | 11,000 | -40 to 200 | Composite, Metal, Plastic, Rubber, Metal to Composite, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Rubber, Rubber to Composite | 10 | 7493A34 | 00000 | ||
Construction Adhesives for Dissimilar Materials
 |  |
Cartidge | Tube |
Bond stone and glass to drywall, treated lumber, and subfloors with these adhesives.
Non-Sag—Non-sag adhesives won't drip from vertical and overhead surfaces.
Cannot Be Sold To—Adhesives that cannot be sold to Canada are restricted due to labeling and reporting requirements. Those that cannot be sold to CA, CO, CT, DE, MD and RI are restricted due to regulatory limits on VOCs (volatile organic compounds).
Container | Strength | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Approx. Linear Coverage @ Bead Dia. | Mixing Req. | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel | Consistency | Temp. Range, ° F | For Use Outdoors | For Joining | Cannot Be Sold To | Choose a Color | Each | |||
Polymer | |||||||||||||||||
| 3.7 | Tube | 10 ft. @ 1/4" | No | 2 | 72 | 200 | Not Rated | Paste | -40 to 150 | No | Ceramic, Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Rubber to Masonry, Wood to Glass | — | Clear | 7475A64 | 00000 | ||
| 3.7 | Tube | 10 ft. @ 1/4" | No | 4 | 72 | 200 | 45 lbf/in. wd. | Paste | -40 to 150 | Yes | Ceramic, Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Rubber to Masonry, Wood to Glass | — | Clear | 7475A71 | 00000 | ||
| 10.2 | Cartridge | 30 ft. @ 1/4" | No | 2 | 72 | 200 | 45 lbf/in. wd. | Paste | -40 to 150 | Yes | Ceramic, Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Rubber to Masonry, Wood to Glass | — | Clear | 7475A78 | 00000 | ||
| 10.2 | Cartridge | 30 ft. @ 1/4" | No | 2 | 72 | 200 | Not Rated | Paste | -40 to 150 | No | Ceramic, Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Rubber to Masonry, Wood to Glass | — | Clear | 7475A52 | 00000 | ||
| 10.2 | Cartridge | 30 ft. @ 1/4" | No | 4 | 72 | 200 | 45 lbf/in. wd. | Thick Liquid | -40 to 150 | No | Ceramic, Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Rubber to Masonry, Wood to Glass | California, Canada, Colorado, Connecticut, Delaware, Maryland, Rhode Island | Black | 7475A51 | 00000 | ||
Non-Sag Polymer | |||||||||||||||||
| 10.2 | Cartridge | 30 ft. @ 1/4" | No | 4 | 72 | 200 | 45 lbf/in. wd. | Paste | -40 to 150 | No | Ceramic, Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Masonry, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Rubber to Masonry, Wood to Glass | California, Canada, Colorado, Connecticut, Delaware, Maryland, Rhode Island | Black, Clear, Gray, White | 7475A4 | 00000 | ||
Noncorrosive Silicone Rubber Sealants
 |  |
Cartridge | Tube |
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone rubber, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Cannot Be Sold to California—Sealants that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Container | Temp., ° F | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Min. | Max. | For Joining | Primer Req. for Use On | Cannot Be Sold To | Choose a Color (Clarity) | Each | |||
Dow Silicone Rubber | ||||||||||||||||||
| 737 | 3 | Tube | 5 | 24 | 300% | -25% to 25% | 175 | Soft (Durometer 30A) | -85 | 350 | Composite Glass Metal Plastic Rubber Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass | Polystyrene Polyurethane Rubber PVC | — | Clear (Clear) | 7587A25 | 000000 | ||
| 737 | 10.1 | Cartridge | 3 | 24 | 300% | -25% to 25% | 175 | Soft (Durometer 30A) | -85 | 350 | Composite Glass Metal Plastic Rubber Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass | Polystyrene Polyurethane Rubber PVC | — | Black (Opaque), Clear (Clear), White (Opaque) | 7587A1 | 00000 | ||
Loctite® Silicone Rubber | ||||||||||||||||||
| SI 5011 CL | 2.7 | Tube | 20 | 24 | 300% | Not Rated | 170 | Soft (Durometer 20A) | -75 | 400 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass | — | — | Clear (Clear) | 7770A27 | 00000 | ||
| SI 5011 CL | 10.1 | Cartridge | 20 | 24 | 300% | Not Rated | 170 | Soft (Durometer 20A) | -75 | 400 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass | — | — | Clear (Clear) | 7770A28 | 00000 | ||
| SI 5109 | 10.1 | Cartridge | 60 | 24 | 300% | Not Rated | 215 | Soft (Durometer 15A) | -75 | 600 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass | — | — | Red (Opaque) | 7770A26 | 00000 | ||
Permatex Silicone Rubber | ||||||||||||||||||
| 81173 | 12.9 | Cartridge | 30 | 24 | 350% | Not Rated | 170 | Soft (Durometer 15A) | -75 | 450 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass | — | California | Black (Semi-Clear) | 7479A34 | 00000 | ||
Impact-Resistant Acrylic Structural Adhesives
|
Cartridge |
Mixed with rubber for resilient bonds that withstand sudden stress, shock, and vibration better than standard acrylics. Acrylics bond with the widest range of materials of any adhesive. They adhere to plastic especially well, requiring little surface preparation.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel, lbf/in. wd. | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | For Joining | Each | |||
Plexus | |||||||||||||||
MA310 | |||||||||||||||
| 31500 | 1.58 | Cartridge | 15 | 24 | 3,000 | 15 | 1:1 | Thick Liquid | 55,000 | -65 to 250 | Composite, Masonry, Metal, Plastic, Wood, Metal to Plastic, Plastic to Composite, Plastic to Masonry | 66215A27 | 000000 | ||
Epoxy Structural Adhesives for Hard-to-Bond Materials
 | |
Bottle | Cartridge |
Join polyethylene, polypropylene, and other plastics standard epoxies can't adhere to. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | For Joining | Each | |||
| 1.69 | Cartridge | 30 | 24 | 360 | Not Rated | 2:1 | Thick Liquid | 9,000 | -50 to 350 | Ceramic, Composite, Glass, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Wood to Glass | 7513A1 | 000000 | ||
| 48 | Bottle | 30 | 24 | 360 | Not Rated | 2:1 | Thick Liquid | 9,000 | -50 to 350 | Ceramic, Composite, Glass, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Glass, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Glass, Plastic to Rubber, Rubber to Composite, Rubber to Glass, Wood to Glass | 7513A2 | 000000 | ||
Structural Sealants
|  |
Cartridge | Sausage Pack |
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Cannot Be Sold To—Structural sealants that cannot be sold to the listed areas are restricted due to VOC (Volatile Organic Compounds) regulations.
Container | Temp., ° F | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Min. | Max. | For Joining | Primer Req. for Use On | Cannot Be Sold To | Choose a Color (Clarity) | Each | |||
3M Polymer | ||||||||||||||||||
| 760 UV | 9.8 | Cartridge | 30 min. | 24 hr. | 100% | Not Rated | 260 | Medium Hard (Durometer 55A) | -40 | 212 | Composite Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | — | — | Black (Opaque), Gray (Opaque), White (Opaque) | 6937T352 | 000000 | ||
| 760 UV | 20.3 | Sausage Pack | 30 min. | 24 hr. | 100% | Not Rated | 260 | Medium Hard (Durometer 55A) | -40 | 212 | Composite Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | — | — | Black (Opaque), White (Opaque) | 6937T192 | 00000 | ||
3M Polyurethane Rubber | ||||||||||||||||||
| 540 | 20.3 | Sausage Pack | 90 min. | 24 hr. | 600% | -25% to 25% | 300 | Medium Soft (Durometer 40A) | -40 | 190 | Composite Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | — | — | Black (Opaque) | 6937T667 | 00000 | ||
| 540 | 20.3 | Sausage Pack | 90 min. | 24 hr. | 600% | -25% to 25% | 300 | Medium Soft (Durometer 40A) | -40 | 190 | Composite Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | — | — | Gray (Opaque) | 6937T678 | 00000 | ||
| 540 | 20.3 | Sausage Pack | 90 min. | 24 hr. | 600% | -25% to 25% | 300 | Medium Soft (Durometer 40A) | -40 | 190 | Composite Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | — | — | White (Opaque) | 6937T649 | 00000 | ||
| 540 | 20.3 | Sausage Pack | 90 min. | 24 hr. | 600% | -25% to 25% | 300 | Medium Soft (Durometer 40A) | -40 | 190 | Composite Metal Plastic Rubber Wood | — | — | — | 6937T635 | 00000 | ||
| 551 | 20.3 | Sausage Pack | 180 min. | 24 hr. | 600% | Not Rated | 450 | Medium (Durometer 45A) | -40 | 190 | Composite Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | — | — | White (Opaque) | 6937T948 | 00000 | ||
| 560 | 20.3 | Sausage Pack | 60 min. | 24 hr. | 300% | Not Rated | 580 | Medium Hard (Durometer 55A) | -40 | 190 | Composite Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | — | — | Black (Opaque), Gray (Opaque), White (Opaque) | 6937T769 | 00000 | ||
Loctite® Polymer | ||||||||||||||||||
| 5510 | 10.1 | Cartridge | 24 hr. | 7 day | 140% | Not Rated | 250 | Medium Soft (Durometer 44A) | -40 | 200 | Composite Masonry Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | — | — | Gray (Opaque) | 6937T513 | 00000 | ||
| 5510 | 10.1 | Cartridge | 24 hr. | 7 day | 140% | Not Rated | 250 | Medium Soft (Durometer 44A) | -40 | 200 | Composite Masonry Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | — | California | Clear (Clear) | 6937T78 | 00000 | ||
| 5510 | 10.1 | Cartridge | 24 hr. | 7 day | 320% | Not Rated | 215 | Medium Soft (Durometer 35A) | -40 | 200 | Composite Masonry Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | — | — | White (Opaque) | 6937T445 | 00000 | ||
Sika Sikaflex Polyurethane Rubber | ||||||||||||||||||
| 1-A | 10.1 | Cartridge | 6 hr. | 7 day | 550% | -35% to 35% | 175 | Medium Soft (Durometer 35A) | -40 | 170 | Composite Masonry Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | Aluminum Plastic Stainless Steel Galvanized Steel | — | Black (Opaque), Gray (Opaque), White (Opaque) | 6937T93 | 00000 | ||
| 1-A | 20 | Sausage Pack | 6 hr. | 7 day | 550% | -35% to 35% | 175 | Medium Soft (Durometer 35A) | -40 | 170 | Composite Masonry Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | Aluminum Plastic Stainless Steel Galvanized Steel | — | Limestone (Opaque) | 6937T401 | 00000 | ||
| 15LM | 10.1 | Cartridge | 6 hr. | 7 day | 700% | -50% to 100% | 125 | Soft (Durometer 20A) | -40 | 170 | Composite Masonry Metal Plastic Rubber Wood Metal to Composite Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | Aluminum Plastic Stainless Steel Galvanized Steel | — | Gray (Opaque), White (Opaque) | 6937T561 | 00000 | ||
Submersible Sealants
3M Polymer
|
Sausage Pack |
Container | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Elongation | Joint Compression/Expansion Tolerance | Hardness Rating | Temp. Range, ° F | For Joining | Color (Clarity) | Each | ||
| 4000UV | 20.3 | Sausage Pack | 30 | 24 | 700% | Not Rated | Medium Soft (Durometer 40A) | -40 to 190 | Composite Metal Plastic Wood Metal to Composite Metal to Plastic Plastic to Composite | White (Opaque) | 67015A74 | 000000 | |
3M Polyurethane Rubber
| |
Cartridge | Tube |
Container | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, hr. | Reaches Full Strength, hr. | Elongation | Joint Compression/Expansion Tolerance | Hardness Rating | Temp. Range, ° F | For Joining | Choose a Color (Clarity) | Each | ||
| 4200 FC | 3 | Tube | 2 | 24 | 400% | Not Rated | Medium Soft (Durometer 40A) | -40 to 190 | Composite Glass Metal Plastic Wood Metal to Composite Metal to Glass Metal to Plastic Plastic to Composite Plastic to Glass Wood to Glass | White (Opaque) | 67015A71 | 000000 | |
| 4200 FC | 10 | Cartridge | 2 | 24 | 400% | Not Rated | Medium Soft (Durometer 40A) | -40 to 190 | Composite Glass Metal Plastic Wood Metal to Composite Metal to Glass Metal to Plastic Plastic to Composite Plastic to Glass Wood to Glass | Black (Opaque), White (Opaque) | 67015A75 | 00000 | |
Acrylic Structural Adhesives
|
Cartridge |
Acrylics bond with the widest range of materials of any adhesive. They adhere to plastic especially well, requiring little surface preparation.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel, lbf/in. wd. | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | For Joining | Each | |||
| 1.69 | Cartridge | 5 | 24 | 3,200 | 7 | 1:1 | Thick Liquid | 64,000 | -40 to 250 | Composite, Masonry, Metal, Plastic, Rubber, Metal to Composite, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Masonry, Rubber to Composite, Rubber to Masonry | 2455N4 | 000000 | ||
| 13 1/2 | Cartridge | 5 | 24 | 3,200 | 7 | 1:1 | Thick Liquid | 64,000 | -40 to 250 | Composite, Masonry, Metal, Plastic, Rubber, Metal to Composite, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Masonry, Rubber to Composite, Rubber to Masonry | 2455N3 | 000000 | ||
Epoxy Structural Adhesives for Harsh Environments
|
Cartridge |
With excellent resistance to corrosive chemicals, these epoxies maintain bonds in tough conditions.
Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | Environment | For Joining | Each | |||
| 1.69 | Cartridge | 30 | 24 | 360 | Not Rated | 2:1 | Thick Liquid | 7,000 | -50 to 350 | Corrosive, Harsh, Submersible | Composite, Metal, Plastic, Rubber, Metal to Composite, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Rubber, Rubber to Composite | 7513A3 | 000000 | ||
Sealants
|
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | Temp., ° F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Min. | Max. | For Joining | Choose a Color (Clarity) | Each | |||
Sika Sikaflex Polymer | ||||||||||||||||
| 505 UV | 10.1 | Cartridge | 30 | 7 day | 275% | Not Rated | 225 | Medium (Durometer 45A) | -40 | 190 | Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass Wood to Glass | White (Semi-Clear) | 6937T35 | 000000 | ||
Polymer | ||||||||||||||||
| — | 9.5 | Cartridge | 20 | 24 hr. | 250% | -25% to 25% | 225 | Soft (Durometer 25A) | -75 | 250 | Composite Masonry Plastic Rubber Plastic to Composite Plastic to Rubber Rubber to Composite | Clear (Clear) | 7322A31 | 00000 | ||
| — | 10.3 | Cartridge | 30 | 24 hr. | 300% | -25% to 25% | 200 | Soft (Durometer 35A) | -75 | 220 | Composite Glass Masonry Metal Plastic Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Plastic to Composite Plastic to Glass Wood to Glass | Black (Opaque), Gray (Opaque), White (Opaque) | 7606A71 | 0000 | ||
| — | 10.3 | Cartridge | 30 | 24 hr. | 450% | -25% to 25% | 180 | Soft (Durometer 35A) | -40 | 195 | Composite Glass Masonry Metal Plastic Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Plastic to Composite Plastic to Glass Wood to Glass | White (Opaque) | 7606A39 | 00000 | ||
All-Weather Application Structural Sealants
 |  | |
2 gal. Container | 5 gal. Container | Cartridge |
| | |
Tube | Sausage Pack |
 |
Black |
 |
Bronze |
 |
Gray |
 |
Limestone |
 |
Tan |
 |
White |
Container | Temp., ° F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden, min. | Reaches Full Strength, day | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Application Temp. Range, ° F | Min. | Max. | For Joining | Choose a Color (Clarity) | Each | |||
Polyether | ||||||||||||||||
| 5 fl. oz. | Tube | 20 | 7 | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | 32 to 200 | -40 | 200 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass Wood to Glass | White (Opaque) | 1534N1 | 00000 | ||
| 10.1 fl. oz. | Cartridge | 20 | 7 | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | 32 to 200 | -40 | 200 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass Wood to Glass | Black (Opaque), Bronze (Opaque), Gray (Opaque), Limestone (Opaque), Tan (Opaque), White (Opaque) | 1534N41 | 00000 | ||
| 20 fl. oz. | Sausage Pack | 20 | 7 | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | 32 to 200 | -40 | 200 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass Wood to Glass | Black (Opaque), Gray (Opaque), White (Opaque) | 1534N5 | 00000 | ||
| 28 fl. oz. | Cartridge | 20 | 7 | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | 32 to 200 | -40 | 200 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass Wood to Glass | Gray (Opaque), White (Opaque) | 1534N6 | 00000 | ||
| 2 gal. | Pail | 20 | 7 | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | 32 to 200 | -40 | 200 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass Wood to Glass | Black (Opaque), Gray (Opaque), White (Opaque) | 1534N7 | 000000 | ||
| 5 gal. | Pail | 20 | 7 | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | 32 to 200 | -40 | 200 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass Wood to Glass | Gray (Opaque), White (Opaque) | 1534N8 | 000000 | ||
Self-Leveling Oil- and Fuel-Resistant Sealants
| |
Cartridge | Tube |
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint expansion/compression tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint expansion/compression tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Cannot Be Sold to California—Sealants that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Container | Temp., ° F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength | Hardness Rating | Min. | Max. | For Joining | Cannot Be Sold To | Choose a Color (Clarity) | Each | |||
Buna-N | ||||||||||||||||
| 4 | Tube | 10 | 24 | 1,000% | Not Rated | Not Rated | Soft (Durometer 25A) | -30 | 300 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass | — | Clear (Clear) | 1532N12 | 00000 | ||
| 4 | Tube | 10 | 24 | 1,000% | Not Rated | Not Rated | Soft (Durometer 25A) | -30 | 300 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass | California | Aluminum (Opaque), White (Opaque) | 1532N41 | 0000 | ||
| 10 | Cartridge | 10 | 24 | 600% | Not Rated | Not Rated | Soft (Durometer 30A) | -30 | 300 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass | — | Aluminum (Opaque) | 1532N15 | 0000 | ||
| 10 | Cartridge | 10 | 24 | 600% | Not Rated | Not Rated | Soft (Durometer 30A) | -30 | 300 | Asphalt Composite Glass Masonry Metal Plastic Rubber Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Metal to Rubber Plastic to Composite Plastic to Glass Plastic to Rubber Rubber to Composite Rubber to Glass | California | White (Opaque) | 1532N16 | 0000 | ||
Optically Clear All-Weather Application Sealants
|
Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics. Apply it in cold temperatures, on wet surfaces, and even through running water. The sealant is non-sagging, so it won't drip from vertical and overhead surfaces. It cannot be sold to the regions listed due to local regulatory limits on VOC (volatile organic compounds).
Elongation indicates flexibility—the higher the value is, the more a sealant can stretch. This sealant is good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | Temp., ° F | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, day | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Application Temp. Range, ° F | Min. | Max. | For Joining | Color (Clarity) | Cannot Be Sold To | Each | |||
Polymer | |||||||||||||||||
| 10.3 | Cartridge | 45 | 4 | 1,000% | Not Rated | 45 | Soft (Durometer 20A) | 40 to 140 | -40 | 180 | Asphalt Composite Glass Masonry Metal Plastic Wood Composite to Glass Metal to Composite Metal to Glass Metal to Plastic Plastic to Composite Plastic to Glass Wood to Glass | Clear (Clear) | Alexandria, VA Arlington County, VA Colorado Connecticut Delaware District of Columbia Fairfax County, VA Fairfax, VA Falls Church, VA Los Angeles County, CA Loudoun County, VA Maine Manassas Park, VA Manassas, VA Maryland Massachusetts New Jersey New York Orange County, CA Pennsylvania Prince William County, VA Rhode Island Riverside County, CA San Bernardino County, CA Stafford County, VA Utah Vermont | 1562N11 | 000000 | ||
Optically Clear Sealants
|
Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics. Sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain.
Model Number 730 UV—3M 730 UV is good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | Temp., ° F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Min. | Max. | For Joining | Color (Clarity) | Each | |||
3M Polymer | ||||||||||||||||
| 730 UV | 10.3 | Cartridge | 30 | 24 | 300% | Not Rated | 250 | Soft (Durometer 30A) | -40 | 190 | Composite Metal Plastic Wood Metal to Composite Metal to Plastic Plastic to Composite | Clear (Clear) | 7606A62 | 000000 | ||
All-Weather Application Sealants
|
Apply these sealants on wet surfaces and in cold temperatures. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Container | Temp., ° F | Each | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, hr. | Reaches Full Strength, day | Elongation | Joint Compression/Expansion Tolerance | Tensile Strength, psi | Hardness Rating | Application Temp. Range, ° F | Min. | Max. | For Joining | Choose a Color (Clarity) | 1-11 | 12-Up | |||
Polymer | |||||||||||||||||
| 10 | Cartridge | 8 | 14 | 550% | -25% to 25% | 100 | Soft (Durometer 22A) | 20 to 120 | -20 | 200 | Composite Masonry Metal Plastic Wood Metal to Composite Metal to Plastic Plastic to Composite | Almond (Opaque), Black (Opaque), Bronze (Opaque), Brown (Opaque), Clear (Clear), Gray (Opaque), White (Opaque) | 7647T3 | 000000 | 000000 | ||
