Brighten remote spaces with the DeWalt rechargeable battery that’s already in your toolkit. These floodlights extend up to 7 ft., and the light head turns at any angle to aim light where it’s needed. When you're done using them, fold them up. They have a handle for easy transport.

Built for tough jobsites, these floodlights have an impact-resistant plastic lens. And rated IP55, they’re sealed against humidity and low-pressure washdowns, so they’re good to use outside and in other damp areas. They’re also protected against dirty, dusty conditions.

Note: Battery life depends on the size of your battery.

Compact and easy to carry, these ETL Listed lights stand up to low-pressure jets of water. The head adjusts up and down as well as side to side to direct light where it's needed. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They cast a cool light that highlights white/blue tones, which is good for inspecting. They also have a durable tempered-glass lens to protect the LEDs.

Bring light to remote areas with the DeWalt rechargeable battery that's already in your toolkit. Built for tough jobsites, their plastic lens resists impact.

Style A have a handle that props them up. It fully rotates so you can aim the light beam where it’s needed.

Style C double as a toolbox—the lights are built into the lid. It has two light heads that pivot to aim light where you need it. You can detach the lid and hang it up with the built-in hook. To conserve battery, these floodlights have seven brightness levels to choose from. They’ll also run on AC power with an extension cord (not included).

IP54-rated floodlights are sealed against humidity and splashing and falling liquids, so they’re good for the outdoors and other damp spaces. They’re also protected against dirty, dusty conditions.

Note: Battery life depends on the size of your battery.

Flood dark, remote jobsites with multiple tiers of light. These cordless lights stack on top of each other to focus a strong beam of light in one direction. The head pivots to aim light where you need it. You can also hang the hooked feet over doors, scaffolding, and other surfaces. With an alloy steel frame and an impact-resistant plastic lens, these lights are built for tough jobsites. Still, they’re lightweight enough to carry around. You can use them outdoors and in other damp locations—rated IP07, they can even handle temporary submersion. A digital display shows you how much charge is left at the brightness level you’re using.

As bright as stadium lights, these floodlights are the most powerful in our offering—they’ll brighten jobsites half the size of a football field. They run on a diesel generator you can use to power other lights and tools in the field. Also known as light towers, they rise up to 23 ft. To direct light where you want it, pivot any of the four heads. You can also rotate the mast, even if it’s already raised.

Rated IP65, these floodlights are protected against dust and low-pressure washdowns. That means rain won’t be a problem. They’ll also handle winds up to 65 mph. Just secure the hitch and two side supports to the ground with the attached leveling jacks. These floodlights will work in the cold, but not in subzero temperatures.

For towing from jobsite to jobsite, these floodlights have a trailer with a ball hitch and tongue. They also come with safety chains, which have a 7,800-lb. load capacity. The trailer’s lights are D.O.T. approved for road use.

Aim light where it’s needed most in areas that don't have an electrical outlet.

Lights with rechargeable batteries include a USB charging cord.

Style A swivel like a joystick to aim light. They also have a magnet on the back, so you can pop them on most metal surfaces.

Style B have a large head to cast even light with minimal glare and shadows. You can pivot the head up and down and rotate the head side to side to aim light. The stand has magnets for attaching these lights to most metal surfaces. A swivel hook unfolds from the back of the lights, so you can hang them.

Style C have a light on the end, so they can be used as a flashlight. Use the flashlight when you need a narrow beam and unfold the head to cast light widely. For hands-free use, they have a magnet and a hook on the base.

Style D show the most accurate colors possible with LEDs, helping you to distinguish similar hues. Use them where color identification is critical, such as paint inspection and wiring. Unfold the head and twist it side to side to aim light. These lights turn on as soon as you unfold the head. A battery indicator shows you how much charge you have left.

Style E help you find fluid leaks and detect flaws and contaminants on a surface—they have an ultraviolet light in addition to a white light. Their white light helps you distinguish similar hues. They show color more accurately than most LEDs. Use them where color identification is critical, such as paint inspection and wiring. The base is magnetic, so you can attach them to most metal surfaces, and a hook folds out for hanging. Designed tough, they can withstand a drop from up to 6 feet without breaking.

Style F and G have a hook that swivels and a magnet on the base to give you a variety of options when mounting them. Style F have a flashlight for when you need a narrow beam.

Lights with daylight light appearance produce white and blue tones, mimicking natural daylight, for a crisp, clear light that’s ideal for inspecting. Lights with a neutral light appearance are commonly used in workspaces.

Lights tested against ANSI/PLATO FL 1 standards confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their head pivots to aim light where it's needed in areas that don't have electrical power service. Hang them by the hook or stand them up for hands-free illumination. To protect the LEDs, their plastic lens resists impact.

Style A have a head that both pivots and rotates, so they’ll point light at any angle. For flexible mounting, they have a hanging hook, belt hook, and kickstand. You can also stick their magnetic back to metal surfaces.

Style C are our brightest option—they have four LEDs instead of one.

Style D have a 360° swiveling hook that locks in place so you can point light where it’s needed. Hang them on pipe up to 2" in diameter.

Note: Battery life depends on the size of your battery.

Power these lights with the same battery as your other cordless tools. They run on a Milwaukee M18 battery (sold separately) to light up work where there’s no outlet. Their head pivots to aim light where you need it, and they’re small enough to easily move from workspace to workspace. Ideal for tough jobsites, their plastic lens resists impact. You can use them outdoors and in other damp areas—rated IP54, they’re sealed against splashing liquid and humidity. They’ll also work in dusty conditions.

Style A have flexible mounting options. They have a hook on top and a hook on the back of the handle that you can rotate for different hanging orientations.

Style B can clamp onto 1”-3” dia. pipes. They also have a magnetic base to mount to most metal surfaces. Their head pivots horizontally and vertically.

Style C throw focused light similar to a flashlight. They have a hook on the back of the handle.

Note: Battery life depends on the size of your battery.

Keep your hands free by wearing a flashlight on your head. These headlamps have long-lasting, built-in LEDs that produce more light and generate less heat than other light technologies. An included strap secures the lamp to your head and adjusts for a comfortable fit.

Headlamps with a uniform beam are especially good for close-up tasks and inspection work. Headlamps with a bull's eye beam have a bright center that can reach long distances.

IP04 rated headlamps withstand liquid splashed from all angles but have not been tested against dust. IP54 rated headlamps protect against dust and liquid splashed from all angles.

Headlamps that cannot be sold to Canada are restricted by local energy efficiency requirements.

Note: Battery life is significantly reduced when headlamps are used at the high-beam light setting.

Safe for use in environments where hazardous material is present, these headlamps shine light on your work while keeping your hands free. With built-in LEDs, they produce more light, are more efficient, and generate less heat than headlamps with other light technologies. All cast a uniform beam that is especially good for close-up tasks and inspection work.

Note: Battery life is significantly reduced when headlamps are used at the high-beam light setting.

Hazardous location environmental ratings indicate where manufactures have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Rated IP07, this headlamp withstands temporary submersion in a maximum of one meter of water for up to 30 minutes. It shines light on your work while keeping your hands free. This headlamp has long-lasting, built-in LEDs that produce more light and generate less heat than other light technologies. It casts a uniform beam that's especially good for close-up tasks and inspection work. Headlamps come on an adjustable elastic strap for normal wear. For secure wear over a hard hat, they also come with a rubber strap and snap-together fastener.

Headlamps with a battery life indicator let you know how close the batteries are to needing replacement. An LED light glows green when battery life is above 80%, yellow when it’s between 20% and 80%, and red when it’s below 20%.

Headlamps with a dimmable light conserve battery life.

Clip these headlamps right into a mount on your tactical or rescue helmet. You can also clip them onto your gear’s MOLLE strap. These headlamps all have multiple LED color options for different scenarios. Use the red or blue beam in low-light environments to preserve your night vision. The blue beam lets you see more details and color differences than the red beam—you can even read. The green beam shows more contrast than red and blue beams, but it can interfere with your ability to see in dark conditions. Meeting ANSI/Plato F1, these lights have been tested for light output, impact resistance, and run time.

Style C project light the farthest of these headlamps. Tilt them up to 90° to point light where you need it. To view clear images through night-vision goggles in dim light or pitch black, switch them to infrared light. A digital lockout option keeps the beam from turning on accidentally. IP07-rated for temporary submersion, they’ll keep working if you drop them in water. These headlamps are compatible with NVG mounts and include a strap if you want to wear them without a helmet.

Light up work while staying visible in high-risk areas. These headlamps have LEDs on the head band so forklift and truck drivers can see you. You can set the lights to shine steady or flash. These headlamps are tested against ANSI/Plato FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style C are a lower cost alternative that has a red light in back so people can see you when it is dark. However, they don’t have lights all around the head band. The front light has a dial to dim the light anywhere from high to low for precise lighting control. They are a good choice for wearing on your head rather than on a hard hat. Rated IP54, they’re sealed against dust and splashing water.

Headlamps with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work.

On headlamps with color options, the red beam lets you see in low light without disrupting your night vision.

The handle opens into a tripod, so you can shine light on your work while keeping your hands free. The head on these flashlights tilts 120°, which allows you to direct the beam exactly where it's needed. When the tripod is closed, they can be carried like a standard flashlight. These flashlights have long-lasting, built-in LEDs that are more efficient and generate less heat than other light technologies. Good for close-up tasks and inspection work, these flashlights cast a flood beam to evenly distribute light.

Clip these little flashlights to a baseball cap or a surface to light up your work. They cast a flood beam with a uniform spread of light that’s ideal for close-up tasks.

Styles A-D can clip onto the brim of a hat. These flashlights are also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style A come with an elastic band, so you can wear them as a headlamp.

Style D have a magnetic back you can stick to metal surfaces, and their two-way clip fits over pockets, straps, and other surfaces. The head rotates 180° to aim light where you need it.

On flashlights with color options, the green beam shows more contrast than the red beam, but it can interfere with your ability to see in dark conditions. The red beam lets you see in low light without disrupting your night vision.

IP04- and IP54-rated flashlights are sealed to keep out dripping, splashing, and falling liquids, as well as humidity. IP54-rated flashlights are sealed against dust.

Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away. You can also stand them on their end to use them as a task light. These flashlights cast a spot beam with a bright center that reaches long distances. To let you know when to recharge, they have a status indicator. These flashlights meet ANSI/PLATO FL 1, so they’ve been tested for light output, impact resistance, and battery life. Each flashlight comes with a shoulder strap for easy transport.

Flashlights with a 120° head tilt have a ribbed grip that won’t slip out of your hand.

IP04-rated flashlights are sealed to keep out dripping, splashing, and falling liquids, as well as humidity.

Clip these little flashlights to any surface up to 1/2” thick and keep your hands free for work. They’re rated for use in environments where ignitable concentrations of flammable or combustible gases, vapors, and liquids are present. They're intrinsically safe for NEC Class I, Division I Groups A, B, C, and D hazardous locations. This means they won't ignite an explosion. With long-lasting, built-in LEDs, they’re more efficient and generate less heat than flashlights with other light technologies. These flashlights cast a spot beam that is bright at the center for long-distance illumination.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

In addition to pivoting 210°, the light heads rotate 360° for directing light exactly where it’s needed. These flashlights are rated for use in environments where hazardous material is present. They’re also rated IP04 to withstand liquid splashed from all angles. With long-lasting, built-in LEDs, these flashlights are more efficient and generate less heat than flashlights with other light technologies. They cast a uniform beam that is especially good for close-up tasks and inspection work. Use the mounting magnet, clip, or retractable hook when you need to keep your hands free for work.

Rechargeable flashlight comes with a 120-volt AC charger that includes a 12-volt DC charging cord. This flashlight cannot be sold to Canada due to local energy efficiency regulations.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Pivot the head to cast a narrow beam of light to exactly where it's needed. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that’s sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Power supplies, also known as transformers, convert your facility's 120 or 240 AC voltage into 24 DC voltage. They cannot be sold to California or Vermont due to local energy efficiency requirements.

Heads adjust to any angle to direct light where needed. No need for timers—a sensor automatically turns the light on at dusk and off at dawn. These lights work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Mount these lights onto your vehicle.

Lights that meet IP69K are protected against dust, pressure, and steam.

Lights that meet IP67 are protected against dust and temporary immersion in water. Those that also meet SAE J593—an international standard for backup lights—are designed for use with your backup cameras.

This light rotates 360° horizontally and 180° vertically to illuminate any spot around a vehicle. It has an on/off switch and a screw-mount bracket.

A handle control lets you aim this light from inside your vehicle to illuminate any spot. It rotates 360° horizontally and 180° vertically. It has a fingertip on/off switch and includes a roof bracket and mounting template.