AGM (Absorbed Glass Mat) Batteries

Filter by

Battery Cell Type

Voltage

Battery Connection

20-Hour Rate Capacity

Battery Terminal Configuration

Height

Battery Chemistry

Width

Depth

Battery Voltage

Electrical Connection

Battery Type

Positive Quick-Disconnect Tab Size

Battery Size

Negative Quick-Disconnect Tab Size

0.187"

0.25"

Battery Capacity

Less than 10,000 mA·h

10,000 mA·h to 19,999 mA·h

20,000 mA·h to 99,999 mA·h

100,000 mA·h to 199,999 mA·h

200,000 mA·h or greater

Cold Cranking Amps

20-Hour Discharge Rate

Number of Batteries

RoHS

Compliant

Compliant with Exemptions

Performance

REACH

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Charging Current

98 Products

Sealed Large-Cell Batteries for Continuous Use


Quick-Disconnect-Terminal Battery Connection	Spring-Terminal Battery Connection	Tab Battery Connection	Tab-Post-Terminal Battery Connection

Threaded-Receptacle-Terminal Battery Connection	A	B	C

E	F	G	H

J	K

Provide backup power for emergency lights, alarm systems, uninterruptible power supplies (UPS) for computers, and other systems that require power over a long period of time. These dry-cell batteries have an absorbed glass mat (AGM) that soaks up the electrolyte, so they’re usable in any position except upside down. They can be recharged hundreds of times.

Warning: Batteries should always be charged and discharged in a ventilated area.

					Quick-Disconnect Tab Size
	Voltage, V DC	Battery Terminal Configuration	20 hr. Rate Cap., A·h	20 hr. Discharge Rate, mA	Positive	Negative	Thread Size	Ht.	Wd.	Dp.		Each
Dry-Cell AGM Lead Acid







				Quick-Disconnect-Terminal Battery Connection

				4	C	4.5	225	0.25"	0.25"	—	3.7"	1.9"	2.1"	7448K57	000000


				4	C	10	500	0.187"	0.187"	—	3.7"	4"	2"	7448K33	00000
				6	A	9	450	0.187"	0.187"	—	4.7"	3.9"	2.2"	7448K15	00000
				6	C	1.2	60	0.187"	0.187"	—	2.2"	3.8"	1"	9579T35	00000
				6	C	1.2	70	0.187"	0.187"	—	2"	3.8"	0.9"	7448K14	00000
				6	C	3.5	175	0.187"	0.187"	—	2.4"	5.3"	1.3"	7448K13	00000
				6	C	7	350	0.187"	0.187"	—	3.7"	6"	1.3"	7448K24	00000
				6	C	12	600	0.187"	0.187"	—	3.7"	6"	2"	7448K34	00000
				6	F	13	650	0.25"	0.187"	—	5.6"	4.3"	2.8"	7448K36	00000
				6	G	5	250	0.187"	0.187"	—	3.9"	2.6"	2.6"	7448K23	00000
				6	H	1	55	0.187"	0.187"	—	2"	2"	1.7"	7448K71	0000


				6	H	4.5	225	0.187"	0.187"	—	3.9"	2.8"	1.9"	7448K53	00000
				6	J	36	1,800	0.25"	0.25"	—	6.5"	6.3"	3.4"	7448K38	00000
				8	E	3.2	160	0.187"	0.187"	—	2.5"	5.3"	1.4"	7448K12	00000
				12	B	26	1,300	0.25"	0.25"	—	4.9"	6.6"	7"	7448K43	000000
				12	C	2.5	125	0.187"	0.187"	—	2.4"	7"	1.4"	7448K18	00000
				12	C	2.9	145	0.187"	0.187"	—	2.4"	7"	1.4"	7448K22	00000
				12	C	5	250	0.187"	0.187"	—	4"	3.5"	2.8"	7448K49	00000
				12	C	5	250	0.25"	0.25"	—	4"	3.5"	2.8"	7448K26	00000
				12	C	6	300	0.25"	0.25"	—	4"	3.5"	2.8"	7448K81	00000
				12	E	1.4	70	0.187"	0.187"	—	2"	3.8"	1.7"	7448K17	00000


				12	E	3.4	170	0.187"	0.187"	—	2.4"	5.2"	2.6"	7448K19	00000
				12	E	12	600	0.187"	0.187"	—	3.7"	6"	4"	7448K28	00000
				12	E	12	600	0.25"	0.25"	—	3.7"	6"	4"	7448K31	00000
				12	K	7	350	0.187"	0.187"	—	3.7"	6"	2.6"	7448K39	00000
				12	K	7	350	0.25"	0.25"	—	3.7"	6"	2.6"	7448K87	00000
				12	K	7.5	390	0.25"	0.25"	—	3.9"	6"	2.6"	7667K81	00000
				12	K	8.5	425	0.25"	0.25"	—	3.7"	5.9"	2.6"	7448K82	00000
				12	K	9	450	0.25"	0.25"	—	3.7"	6"	2.6"	7448K21	00000
				12	K	12	600	0.25"	0.25"	—	3.7"	6"	3.9"	7448K32	00000
				12	K	14	700	0.25"	0.25"	—	3.7"	6"	3.9"	7448K11	00000




						Spring-Terminal Battery Connection

						6	G	5	250	—	—	—	3.9"	2.6"	2.6"	7448K29	00000




								Tab Battery Connection

								6	C	20	1,000	—	—	—	4.9"	6.2"	3.3"	7448K58	00000


								12	B	18	900	—	—	—	6.57"	7.13"	2.99"	7195K75	00000
								12	B	18	900	—	—	—	6.6"	7.1"	3"	7448K51	00000
12								B	40	2,000	—	—	—	6.7"	7.8"	6.5"	7448K45	000000
12	C							28	1,400	—	—	—	7"	6.5"	4.9"	7448K37	000000




		Tab-Post-Terminal Battery Connection

		12	C					35	1,750	—	—	—	6.2"	7.7"	5.1"	7448K52	000000


		12	C					55	2,750	—	—	—	8.2"	9"	5.5"	7448K83	000000
		12	C					78.6	3,750	—	—	—	8.2"	10.3"	6.6"	7448K44	000000
		12	C					100	5,000	—	—	—	8.2"	12"	6.6"	7448K48	000000




								Threaded-Receptacle-Terminal Battery Connection

								12	C	107	5,500	—	—	M8	8.4"	13"	6.7"	7448K85	000000


								Dry-Cell AGM Lead Calcium







												Quick-Disconnect-Terminal Battery Connection

												6	C	8	350	0.25"	0.187"	—	3.7"	6"	1.4"	7448K61	00000

Long-Life Sealed Large-Cell Batteries for Continuous Use


Quick-Disconnect-Terminal Battery Connection	Tab Battery Connection	Threaded-Receptacle-Terminal Battery Connection

B	C	K

Replace batteries less often—these batteries last at least twice as long as standard sealed large-cell batteries. Use them to provide backup power for emergency lights, alarm systems, uninterruptible power supplies (UPS) for computers, and other systems that require power over a long period of time. All are dry cell, so they have an absorbed glass mat (AGM) that soaks up the electrolyte and can be used in any position except upside down. They can be recharged hundreds of times.

Warning: Batteries should always be charged and discharged in a ventilated area.

					Quick-Disconnect Tab Size
	Voltage, V DC	Battery Terminal Configuration	20 hr. Rate Cap., A·h	20 hr. Discharge Rate, mA	Positive	Negative	Thread Size	Ht.	Wd.	Dp.		Each
Dry-Cell AGM Lead Acid







				Quick-Disconnect-Terminal Battery Connection

				6	C	7	360	0.187"	0.187"	—	3.9"	6"	1.3"	2920K1	000000


				6	C	10	600	0.187"	0.187"	—	4"	6"	2"	2920K2	00000
				12	K	7	360	0.187"	0.187"	—	3.9"	6"	2.6"	2920K3	00000




						Tab Battery Connection

						12	B	17.2	850	—	—	—	6.6"	7.1"	3"	2920K4	000000




								Threaded-Receptacle-Terminal Battery Connection

								12	B	28	1,500	—	—	M5	5"	6.6"	7"	2920K6	000000


								12	C	35	1,800	—	—	M6	6.6"	7.7"	5.2"	2920K7	000000
								12	C	60	3,000	—	—	M6	8.5"	9.1"	5.5"	2920K9	000000
								12	C	78	4,000	—	—	M6	8.2"	10.2"	6.7"	2920K12	000000
								12	C	98.8	5,200	—	—	M6	8.2"	12"	6.7"	2920K13	000000

Sealed Large-Cell Batteries for Starting and Continuous Use


Tab-Post-Terminal Battery Connection	Stud-Terminal Battery Connection	Post-and-Stud Terminal Battery Connection	Offset-Tab Post Terminal Battery Connection

Post-and-Side-Socket Terminal Battery Connection	Post-Terminal Battery Connection	A	B

C	D	E

Deliver a surge of power to start automobiles and other vehicles, and provide power over a long time. These batteries are deep cycle, so they can handle many charge/deep discharge cycles. All are dry cell, so they have an absorbed glass mat (AGM) that soaks up the electrolyte and can be used in any position except upside down. They can be recharged hundreds of times.

Reserve capacity is the number of minutes that a new, fully charged battery can continuously discharge at 25 amps at 80° F. Marine cranking amps is the maximum amps that a new, fully charged battery can continuously deliver for 30 seconds at 32° F.

Warning: Batteries should always be charged and discharged in a ventilated area.

	Battery Cap., A·h	Battery Terminal Configuration	Reserve Cap., min.	Marine Cranking Amps	Thread Size	Ht.	Wd.	Dp.		Each
Dry-Cell AGM Lead Acid







	Tab-Post-Terminal Battery Connection

	12	U1	—	32	C	45	240	—	7.3"	8.3"	5.1"	71805K11	0000000




			Stud-Terminal Battery Connection

			12	31	—	100	D	190	1,050	3/8"-16	9.5"	13"	6.8"	71805K42	000000




					Post-and-Stud Terminal Battery Connection

					6	GC2	—	190	A	380	900	5/16"-18	10.9"	10.3"	7.1"	71805K18	000000


					12	27	27M	92	C	175	900	5/16"-18	9.9"	12.8"	6.8"	71805K14	000000
					12	24	24M	79	C	135	800	5/16"-18	9.9"	10.9"	6.8"	71805K13	000000
					12	31	31M	105	D	200	1,000	5/16"-18	9.4"	12.9"	6.8"	71805K15	000000




							Offset-Tab Post Terminal Battery Connection

							12	22NF	—	55	B	85	420	—	9.3"	9.4"	5.5"	71805K12	000000




									Post-and-Side-Socket Terminal Battery Connection

									12	34/78	—	55	C	120	955	—	8"	10.8"	6.9"	71805K41	000000




											Post-Terminal Battery Connection

											12	4D	—	198	E	380	1,420	—	10"	20.8"	8.5"	71805K16	000000


											12	8D	—	245	E	480	1,800	—	10"	20.8"	11"	71805K17	000000
											12	65	—	75	C	150	955	—	7.6"	12"	7.4"	71805K43	000000

Sealed Large-Cell Batteries for Starting

Box-Tab

Terminal with

Two Openings

Battery

Connection

Start automobiles and other vehicles with a surge of power. These dry-cell batteries have an absorbed glass mat (AGM) that soaks up the electrolyte, so they’re usable in any position except upside down. They can be recharged hundreds of times.

Cold cranking amps is the maximum amps that a new, fully charged battery can continuously deliver for 30 seconds at 0° F.

Warning: Batteries should always be charged and discharged in a ventilated area.

	Cold Cranking Amps	Ht.	Wd.	Dp.		Each
Dry-Cell AGM Lead Acid







	Box-Tab Terminal with Two Openings Battery Connection

	12	Y50-N18L-A	B	340	6.4"	8.1"	3.6"	7238K12	0000000

Battery Surge Protectors/Charge Monitors for Large-Cell Batteries

Image of Product. Front orientation. Battery Surge Protectors/Charge Monitors.

See the charge level of a large-cell battery while protecting it from power surges. These monitors also check the condition of your charging system.

	Battery Connection (Cord Length)	Features	Mount Type	Ht.	Wd.	Dp.		Each
For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries



	12	3/8" ID Ring Terminal (20")	Charge Status Indicator	Adhesive Back	1 3/4"	2 1/4"	1"	4261T11	000000

Handheld Battery Jump Starters for Large-Cell Batteries

Once fully charged, these starters store enough power to jump start a battery multiple times. All have reverse-polarity protection to prevent sparks and short circuits if the clamps touch or if they're not connected properly to a battery. They also have a USB port to charge mobile devices such as smartphones and tablets. To recharge, connect them to a USB port with the included cord.

12V Vehicle Plug—Starters with a 12-volt vehicle plug can be charged in a vehicle outlet.

2-ft. Adapter Cord—For 2,000A and 3,000A starters, use the adapter cord with the 12-volt vehicle socket to charge devices that require more power than what the USB cord delivers.

	Cold Cranking Amps	Battery Connection (Cord Lg.)	Includes	Features	Battery Chemistry	Ht.	Wd.	Dp.		Each
For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries



	12	500	Terminal Clamp (2 ft.)	2-ft. USB Cord	Charge Status Indicator, Reverse-Polarity Protection	Lithium Ion (Li-Ion)	1 11/16"	7 11/16"	3 3/16"	7117K31	000000


	12	1,000	Terminal Clamp (2 ft.)	2-ft. USB Cord, 12V Vehicle Plug	Charge Status Indicator, Reverse-Polarity Protection	Lithium Ion (Li-Ion)	1 11/16"	7 11/16"	3 3/16"	7117K32	000000
	12	1,500	Terminal Clamp (2 ft.)	2-ft. USB Cord, 12V Vehicle Plug	Charge Status Indicator, Reverse-Polarity Protection	Lithium Ion (Li-Ion)	2"	8 5/8"	3 7/16"	7117K41	000000
	12	2,000	Terminal Clamp (2 ft.)	2-ft. Adapter Cord, 2-ft. USB Cord, 12V Vehicle Plug, 12V Vehicle Socket	Charge Status Indicator, Reverse-Polarity Protection	Lithium Ion (Li-Ion)	2 13/16"	8 13/16"	6"	7117K33	000000
	12	3,000	Terminal Clamp (2 ft.)	2-ft. Adapter Cord, 2-ft. USB Cord, 12V Vehicle Plug, 12V Vehicle Socket	Charge Status Indicator, Reverse-Polarity Protection	Lithium Ion (Li-Ion)	2 11/16"	12 3/8"	7 5/16"	7117K34	000000

DC Voltage and Conductivity Testers for Large-Cell Batteries

Measure the voltage of your batteries as well as the current they can supply to check battery health.

	For Battery Voltage, V DC	For Battery 20 hr. Rate Cap. Range, A·h	Measurement Unit	Voltage, V DC	Conductivity, S	Display Type	Digital Display Type	Includes	Ht.	Wd.	Dp.		Each
For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries



	Rechargeable	6/12	1.2 to 55	Siemens, Volts	6 to 14	20 to 1,200	Digital	LED	12" Leads with Sheathed Alligator Clips	7 1/2"	3 1/2"	2"	4863T11	0000000

Solar Panel Chargers for Large-Cell Batteries


Rigid	Flexible

Keep batteries charged even when electricity is unavailable. These chargers can be used in any battery capacity range.

					Battery Connection				Mounting Holes
	For Battery Voltage, V DC	For Battery Cap. Range, A·h	Charging Current, amp	Output Wattage, W	Ring ID	Connection Type	End Type	Cord Lg.	No. of	Dia.	Mounting Fasteners Included	Includes	Backing Material	Ht.	Wd.	Dp.		Each
Rigid







				Manual Charger for Dry-Cell AGM Lead Acid Batteries and Wet-Cell Lead Acid Batteries

				12	—	0.2	2.4	—	Terminal Clamp, Vehicle	Plug	108"	4	0.11"	Yes	—	—	19 3/8"	10 1/4"	1 3/8"	69205K91	000000


				12	—	0.4	4.8	—	Terminal Clamp, Vehicle	Plug	132"	4	0.11"	Yes	—	—	17 1/4"	15"	2 3/4"	69205K92	00000


				Flexible







								Manual Charger for Dry-Cell AGM Lead Acid Batteries and Wet-Cell Lead Acid Batteries

								12	2 to 50	0.45	7	5/16" 3/8"	Ring Terminal	—	15 ft.	4	3/8"	No	3-ft. Cord with 12V Vehicle Socket	Vinyl Plastic	23"	14 1/2"	3/64"	4859T15	000000


								12	5 to 100	0.9	14	5/16" 3/8"	Ring Terminal	—	15 ft.	4	3/8"	No	3-ft. Cord with 12V Vehicle Socket	Vinyl Plastic	42"	14 1/2"	3/64"	4859T16	000000

Cords

		Each
5-ft. Power Cord with Vehicle Plug for Flexible Chargers	4859T14	000000

Large-Cell Battery Chargers


Style A	Style B

Style C	Style D

After the battery is fully charged, these chargers continuously provide a low-level charge to maintain the battery without overcharging.

Style A

Reverse-Polarity Protection—Chargers with reverse-polarity protection prevent sparks and short circuits if the connectors touch or if they're not connected properly to the battery.

Cannot Be Sold To—Chargers that cannot be sold to California and Oregon are restricted by local energy efficiency regulations.

						Electrical
	For Lithium Type	For Battery Voltage, V DC	For Battery Cap., A·h	Charging Current, amp	Battery Connection (Cord Lg.)	Connection	No. of Blades	Power Cord Lg., ft.	Input Voltage, V AC	Ht.	Wd.	Dp.	Cannot Be Sold To		Each
For Lithium Ion (Li-Ion), Dry-Cell AGM Lead Acid, and Wet Cell Lead Acid Batteries







				With Charge Status Indicator and Reverse-Polarity Protection

				Lithium Iron Phosphate (LiFePO4)	12/24	80 to 150	10	50 amp Terminal Clamp (8 ft.)	Straight Blade	3	8	120	6 1/2"	7"	8"	California, Oregon	1458K17	0000000


				Lithium Iron Phosphate (LiFePO4)	12/24	150 to 350	25	50 amp Terminal Clamp (8 ft.)	Straight Blade	3	8	120	8"	10"	10"	—	1458K18	000000
				Lithium Iron Phosphate (LiFePO4)	24	80 to 150	10	50 amp Terminal Clamp (8 ft.)	Straight Blade	3	7	120	6 1/2"	7"	8"	California, Oregon	1458K3	000000
				Lithium Iron Phosphate (LiFePO4)	24	150 to 350	25	50 amp Power Pole (8 ft.)	Straight Blade	3	7	120	8 1/2"	10"	9 1/2"	—	1458K4	000000
				Lithium Iron Phosphate (LiFePO4)	36	150 to 350	25	175 amp Power Pole (8 ft.)	Straight Blade	3	8	120	8 1/2"	10"	9 1/2"	California, Oregon	1458K13	000000
				Lithium Iron Phosphate (LiFePO4)	48	150 to 350	25	175 amp Power Pole (8 ft.)	Straight Blade	3	8	120	8 1/2"	10"	9 1/2"	California, Oregon	1458K14	000000

Style B

Style B have mounting holes to attach them directly to mobile equipment, such as lift tables and floor scrubbers—no need to lug your equipment to a charger to power it.

Reverse-Polarity Protection—Chargers with reverse-polarity protection prevent sparks and short circuits if the connectors touch or if they're not connected properly to the battery.

Cannot Be Sold To—Chargers that cannot be sold to California and Oregon are restricted by local energy efficiency regulations.

						Electrical							Mounting Holes
	For Lithium Type	For Battery Voltage, V DC	For Battery Cap., A·h	Charging Current, amp	Battery Connection (Cord Lg.)	Connection	No. of Blades	Power Cord Lg., ft.	Input Voltage, V AC	Ht.	Wd.	Dp.	No. of	Dia.	Mounting Fasteners Included	Cannot Be Sold To		Each
For Lithium Ion (Li-Ion), Dry-Cell AGM Lead Acid, and Wet Cell Lead Acid Batteries







				With Charge Status Indicator and Reverse-Polarity Protection

				Lithium Iron Phosphate (LiFePO4)	48	150 to 350	25	3/8" ID Ring Terminal (8 ft.)	Straight Blade	3	8	120	6"	9"	8"	4	3/8"	No	California, Oregon	1458K12	0000000

Style C

Reverse-Polarity Protection—Chargers with reverse-polarity protection prevent sparks and short circuits if the connectors touch or if they're not connected properly to the battery.

					Electrical
	For Battery Voltage, V DC	For Battery Cap., A·h	Charging Current, amp	Battery Connection (Cord Lg.)	Connection	No. of Blades	Power Cord Lg., ft.	Input Voltage, V AC	Ht.	Wd.	Dp.		Each
For Dry-Cell AGM Lead Acid and Wet Cell Lead Acid Batteries







				With Charge Status Indicator and Reverse-Polarity Protection

				6/12	1.2 to 200	1.25	Terminal Clamp (18"), 5/16" ID Ring Terminal (18"), SAE Power Connector (6 ft.)	Straight Blade	2	6	120	2"	7"	3 3/4"	76025K15	000000

Style D

Reverse-Polarity Protection—Chargers with reverse-polarity protection prevent sparks and short circuits if the connectors touch or if they're not connected properly to the battery.

					Electrical
	For Battery Voltage, V DC	For Battery Cap., A·h	Charging Current, amp	Battery Connection (Cord Lg.)	Connection	No. of Blades	Power Cord Lg., ft.	Input Voltage, V AC	Ht.	Wd.	Dp.		Each
For Dry-Cell AGM Lead Acid and Wet Cell Lead Acid Batteries







				With Charge Status Indicator and Reverse-Polarity Protection

				6/12	12 to 68	2, 10	Terminal Clamp (7 ft.)	Straight Blade	2	7	120	7 3/4"	10 1/2"	3 3/4"	1458K5	0000000


				12	13 to 100	20	Terminal Clamp (6 ft.)	Straight Blade	3	6	120	11"	8"	6"	1458K2	000000

Water-Resistant Large-Cell Battery Chargers


A	Style D

Charge batteries even in wet environments—a sealed housing keeps water out. They have reverse-polarity protection to prevent sparks and short circuits if the ring terminals touch or if they're not connected properly to the battery. After the battery is fully charged, they continuously provide a low-level charge to maintain the battery without overcharging.

Style A

					Electrical
	For Battery Voltage, V DC	For Battery Cap., A·h	Charging Current, amp	Battery Connection (Cord Lg.)	Connection	No. of Blades	Power Cord Lg., ft.	Input Voltage, V AC	Ht.	Wd.	Dp.	Mounting Hole Dia.	Mounting Fasteners Included		Each
For Dry-Cell AGM Lead Acid and Wet Cell Lead Acid Batteries



		12/24	5 to 100	2.5, 5	SAE Power Connector (4 ft.), 5/16" ID Ring Terminal (18")	Straight Blade	3	6	120	5 1/8"	8 7/8"	2"	3/8"	No	76025K24	0000000

Style D

When used with lithium batteries, Style D chargers must match the battery’s lithium type.

						Electrical							Mounting Holes
	For Lithium Type	For Battery Voltage, V DC	For Battery Cap., A·h	Charging Current, amp	Battery Connection (Cord Lg.)	Connection	No. of Blades	Power Cord Lg., ft.	Input Voltage, V AC	Ht.	Wd.	Dp.	No. of	Dia.	Mounting Fasteners Included		Each
For Lithium Ion (Li-Ion), Dry-Cell AGM Lead Acid, and Wet Cell Lead Acid Batteries



		Lithium Cobalt Oxide (LiCoO2), Lithium Iron Phosphate (LiFePO4), Lithium Nickel Manganese Cobalt Oxide (LiNiMnCoO2 or NMC)	24	55 to 425	40	3/8" ID Ring Terminal (6 ft.)	Straight Blade	3	6	120	3 7/8"	8 1/2"	12"	4	5/16"	No	1994N11	0000000


		Lithium Cobalt Oxide (LiCoO2), Lithium Iron Phosphate (LiFePO4), Lithium Nickel Manganese Cobalt Oxide (LiNiMnCoO2 or NMC)	36	55 to 425	26	3/8" ID Ring Terminal (6 ft.)	Straight Blade	3	6	120	3 7/8"	8 1/2"	12"	4	5/16"	No	1994N12	000000
		Lithium Cobalt Oxide (LiCoO2), Lithium Iron Phosphate (LiFePO4), Lithium Nickel Manganese Cobalt Oxide (LiNiMnCoO2 or NMC)	48	55 to 425	20	3/8" ID Ring Terminal (6 ft.)	Straight Blade	3	6	120	3 7/8"	8 1/2"	12"	4	5/16"	No	1994N13	000000

Handheld Battery Charger/Starters for Large-Cell Batteries

Small enough to carry, these charger/starters provide a 125-amp starting current. They have reverse-polarity protection to prevent sparks and short circuits if the clamps touch or if they're not connected properly to the battery. After the battery is fully charged, they continuously provide a low-level charge to maintain the battery without overcharging.

	Starting Current, amp	Battery Connection (Cord Lg.)	Features	No. of Blades	Electrical Connection	Power Cord Lg., ft.	Input Voltage, V AC	Ht.	Wd.	Dp.		Each
Automatic Charger







	For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries

	6/12	12 to 150	6/15 to 40	125	Terminal Clamp (12 ft.)	Charge Status Indicator, Reverse-Polarity Protection	2	Straight Blade	6	120	13"	10 1/2"	11 5/8"	7206K44	0000000

Battery Charger/Starters for Large-Cell Batteries

Wheel these charger/starters to batteries that need maintenance. They provide higher starting currents than Handheld Charger/Starters for Large-Cell Batteries. All have reverse-polarity protection to prevent sparks and short circuits if the clamps touch or if they're not connected properly to the battery.

Automatic Charger—Automatic charger/starters turn off when the battery is fully charged, but will continue to monitor the battery and turn back on if voltage drops.

Manual Charger—Manual chargers can be set to continuously charge, or set to shut off automatically with a timer.

	Starting Current, amp	Battery Connection (Cord Lg.)	Features	Wheel Material	No. of Blades	Electrical Connection	Power Cord Lg., ft.	Input Voltage, V AC	Ht.	Wd.	Dp.		Each
Automatic Charger







	For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries

	12	13 to 120	45	130	Terminal Clamp (6 ft.)	Power Supply, Ammeter, Reverse-Polarity Protection	Rubber	3	Straight Blade	6	120	33"	12"	12"	1269K1	0000000


	Manual Charger







					For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries

					6/12/24	20 to 200	30/65/70	280	Terminal Clamp (7 ft.)	Continuous-Charge Setting, Ammeter, Reverse-Polarity Protection, 2 hour timer	Plastic	3	Straight Blade	6	120	27"	14"	13"	7322K58	000000

Stationary Multiple Large-Cell Battery Chargers

Charge up to eight batteries at once. After the battery is fully charged, these chargers continuously provide a low-level charge to maintain the battery without overcharging.

							Electrical
	For Battery Voltage, V DC	For No. of Batteries	For Battery Capacity	Charging Current, amp	Battery Connection (Cord Lg.)	Features	Connection	No. of Blades	Power Cord Lg., ft.	Input Voltage, V AC	Ht.	Wd.	Dp.		Each
For Dry-Cell AGM Lead Acid and Wet Cell Lead Acid Batteries



		6/12	8	24 A·h/44 A·h to 75 A·h	2 to 12	Terminal Clamp (6 ft.)	Charge Status Indicator	Straight Blade	3	9	120	12 1/8"	19 1/8"	12"	7318K35	0000000

Battery Load Testers for Large-Cell Batteries

Apply a fixed load to small engine batteries that draw up to 125 amps.

Testers with a 60/125-amp current load capacity offer two fixed loads. It is better for testing smaller batteries that draw up to 60 amps.

	For Battery Voltage, V DC	Current Load Cap., amp	Battery Connection	Battery Connection Cord Lg., ft.	Includes	Ht.	Wd.	Dp.		Each
For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries



	Rechargeable	6/12	60/125	Grounding Clamp	2	—	9 1/2"	3 1/2"	3 1/2"	7579K41	0000000


	Rechargeable	6/12	125	Grounding Clamp	2	Side Terminal Adapters	9 1/2"	3 1/2"	3 1/2"	7579K23	000000

Adjustable Battery Load Testers for Large-Cell Batteries

Test large engine batteries that draw up to 500 amps. Turn the dial to vary the load applied to the battery to see how it performs at different loads.

	For Battery Voltage, V DC	Current Load Cap., amp	Battery Connection	Battery Connection Cord Lg., ft.	Ht.	Wd.	Dp.		Each
For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries



	Rechargeable	12	0 to 500	Grounding Clamp	3.5	10"	5"	10 1/2"	7240K3	0000000

Battery Load Testers with Alternator Test Lead for Large-Cell Batteries

In addition to applying a fixed load to small engine batteries that draw up to 125 amps, this tester can check for defective alternator diodes.

	For Battery Voltage, V DC	Current Load Cap., amp	Battery Connection	Battery Connection Cord Lg., ft.	Includes	Ht.	Wd.	Dp.		Each
For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries



	Rechargeable	6/12	125	Grounding Clamp	2	4-ft. Test Lead for Defective Alternator Diodes, Side Terminal Adapters	9 1/2"	3 1/2"	3 1/2"	7579K25	0000000