Vortex tubes convert compressed air into a stream of cold air.

Keep electronics inside enclosures from overheating by converting compressed air into a stream of cold air.

Set the thermostat and these vortex tubes switch on only when needed.

Set the thermostat and these vortex tubes switch on only when needed.

Quietly cool electronics inside enclosures to your desired temperature while keeping out rain, snow, splashing water, and dirt.

In addition to being quieter than standard enclosure-cooling vortex tubes, these stand up to washdowns and weather. They convert compressed air into a stream of cold air to keep electronics within enclosures from overheating while also keeping dust and other contaminants out.

UL classified for hazardous locations, these vortex tubes convert compressed air into a stream of cold air to keep electronics within enclosures from overheating while also keeping dust and other contaminants out.

Mount these air conditioners to walls inside enclosures and cabinets to keep equipment from overheating.

Suitable for washdown applications, these air conditioners are rated NEMA 4X to resist dirt, washdowns, and corrosion.

Produce twice as much cool air as standard mobile evaporative air coolers.

Install these air conditioners in an opening in an exterior wall.

Built to withstand harsh environments, these air conditioners meet ANSI/ISA 12.12.01 and NEC Class I, Division 2, Groups A, B, C, and D ratings for hazardous locations.

For more cooling capacity than other liquid chillers, these have a heavy duty pump that can handle higher flow rates and pressures.

Install these blowers into ductwork where high static pressures are present.

Operate these blowers with a DC power source, such as your vehicle battery.

These blowers have an aluminum housing for spark resistance.

Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard spark-resistant blowers can handle.

These blowers have a motor that is UL listed for Class I, Divisions 1 and 2, Group D; and Class II, Divisions 1 and 2, Groups F and G hazardous locations.

In addition to blowing twice as much air as other portable blowers, these have a motor that is UL listed for Class I, Divisions 1 and 2, Group D; and Class II, Divisions 1 and 2, Groups E, F, and G hazardous locations.

Blow twice as much air as other portable blowers.

Generate at least 25% greater airflow than standard office pedestal fans.

Position these fans to keep office personnel cool.

Wheels make it easy to move these fans.

Draw fresh air in or push stale air out of your windows. Reverse airflow with the flip of a switch.

Position these fans in a window, set them on the floor, or attach them to an optional box fan stand.

Mount these fans on flat ceilings. All include a support cable and downrods to mount them into joists.

A bright yellow guard makes these fans easy to spot.

Generate at least 25% greater airflow than economy and premium fans.

Tilt fans to direct air where it's needed.

Attach these fans to beams to direct air where it’s needed.

Wheel these mobile fans wherever you need them. Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.

With a ball-bearing motor and cupped fan blades, these fans last longer and focus airflow better than economy fans.

With a ball-bearing motor and cupped fan blades, these fans last longer and focus airflow better than economy fans.

Position these fans near meeting areas to circulate air without drowning out voices.

Generate at least 25% greater airflow than economy and premium fans.

Often used in welding shops and oil refineries, the motor in these fans is rated as safe for use around flammable and combustible gas, vapor, and dust.

The motor in these freestanding fans is UL listed for Class I, Group D; Class II, Groups E, F, and G hazardous environments.

Made of corrosion-resistant material, these fans meet UL 507 spray test requirements for washdowns.

These light duty fans are designed for use without duct.

Belt-drive fans are quieter and have a longer life span than direct-drive fans because components can be replaced if worn or damaged.

Better suited for dirty, dusty, and damp environments than standard belt-drive fans, these have a totally enclosed motor enclosure.

Protect the supply side of your wall-mount exhaust fans from debris.

Good when you don't have room to mount an exhaust fan inside your facility, these fans attach to an outside wall and work with or without duct.

Belt-drive fans are quieter and have a longer life span than direct-drive fans because components can be replaced if worn or damaged.

Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.

Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.

Insert these fans directly into your ductwork. They give small heaters and air conditioners a boost to circulate air through ductwork.

Designed to spin freely with the slightest breeze, these fans create a vacuum that draws air out from buildings and ventilation systems—no electricity required.

Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.

Exhaust air and humidity directly into the outdoors without using duct.

Use these fans to draw stagnant and humid air out of a room.

Protect equipment in enclosures and cabinets from heat.

Slide these trays in to cool your standard 19" wide enclosure.

Able to withstand dust and water splashes, these fans are IP54 rated.

These fans produce greater airflow than standard equipment-cooling fans.

Running on 48V DC power or lower, these compact fans fit inside electronics and other small, heat-sensitive equipment to keep things cool.

Safely cool electronics and equipment where explosive gases could be present due to equipment failure. ATEX certified, these fans meet European standards for hazardous locations.

Keep electronics cool in wet areas. These fans withstand weather, washdowns, and occasional time spent underwater.

Able to withstand dust and water splashes, these fans are IP rated.

Able to withstand submersion in up to 3 meters of water, these fans cool electronics in food processing areas and outdoors.

Kits include a fan, guard, and power cord. They keep heat-sensitive equipment such as electronic components cool.

With the addition of a thermostat, the fans in these kits switch on only when needed.

To keep unenclosed electronic components cool, place trays on top of equipment to direct a stream of air below.

For use in tight spaces where other equipment-cooling blowers won't fit, air enters through the center of the unit and then expels along the edges.

Generate at least 25% greater airflow than standard fan blades.