For exact positioning, these hoses swivel 360°.

In addition to using the handle to carry these exhausters, you can mount them to a wall, bench, or floor.

Position these exhausters above drums, tanks, and distillers.

Eliminate static buildup while cleaning air.

Eliminate static buildup while cleaning air.

Carry these small cleaners to job sites to remove odors and dust from the air.

Larger than portable air cleaners, these air cleaners roll to where you need them.

Often used in machine shops, these cleaners remove oil and coolant mist from the air.

Save floor space—cleaners mount in a T-bar style ceiling.

These washable, durable filters are made to your dimensions.

These filters are built to withstand higher temperatures than other metal panel air filters.

The pleats create a large surface area for filtering without reducing airflow.

A compound inhibits mildew and mold growth.

The filter material extends beyond the frame for a tight fit, creating a seal to prevent air from bypassing the filter around its edges.

Create a custom-sized filter or protective layer for expensive filters.

Rated MERV 11, these filters capture particles down to 1 micron.

Carbon granules in these filters remove odors. They are pleated to maximize filtering surface area without reducing airflow.

Use in exhaust hoods to remove grease and oil from the air.

Wash and reuse these pads. Cut to the size you need.

Determine the right pores per inch for your air filtering application—you'll receive several small samples with different pores per inch.

Wrapped in aluminum mesh for added support, these filters can be used without a frame.

Cut these rolls to the size you need.

These pads are an economical choice for protecting more expensive filters that catch finer particles.

With a higher carbon concentration than odor-removal air filter rolls, these pads handle heavier odors.

Add support to filter rolls and pads that have been cut to size.

Multiple panels maximize filtering surface area for long service life.

Control dust and contaminants in hospitals, laboratories, and other demanding environments. These filters capture particles down to 0.3 microns.

Replace the filter element in your Norgren modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your ASCO Numatics modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your ARO modular compressed air filter to trap solid particles and water droplets.

Also known as coalescing filters, these filter elements fit in Parker modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in SMC modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in Norgren modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in Wilkerson modular compressed air filters to remove oil and fine particles.

Replace a damaged bowl, or change the bowl material or drain type on your SMC modular compressed air filter.

Replace a damaged bowl, or change the drain type on your Festo modular compressed air filter.

Replace a damaged bowl, or change the bowl material or drain type on your Parker modular compressed air filter.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Use these filters to extend the service life of air-powered tools and then throw them away when you're done.

Protect small air-powered tools, such as impact wrenches, ratchet wrenches, grinders, and screwdrivers.

Get two stages of filtration—the first stage removes most particles and water droplets; the second captures any remaining particles and water droplets down to 5 microns.

Mount these filters to a 35 mm DIN rail with the included brackets.

Generate clean air for instrumentation and applications with critical air requirements.

Often used in medical device manufacturing and food-processing facilities, these filters have a stainless steel element that can be sterilized in an autoclave.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Mount these filters to a 35 mm DIN rail with the included brackets.

Housing and bowl are 316 stainless steel to handle extremely corrosive environments and meet NACE (National Association of Corrosion Engineers) specifications.

Eliminate small traces of oil vapor and its associated odor with these filters and then throw them away when you're done.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.

No need to buy and service two filters—these filters have a single element that removes both large and fine particles.

Replace failing or lost O-rings in SMC modular compressed air filters.

Replace failing or lost O-rings in Festo modular compressed air filters.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Designed for installation directly to your air-powered tool, these regulators maintain the set air pressure.

Cleaned and double bagged in an ISO Class 3 and Fed. Spec. Class 1 clean room for protection from contamination, these regulators are suitable for use in clean rooms.

Mount these regulators to a 35 mm DIN rail with the included brackets.

A 316 stainless steel housing allows these regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

A pressure-calibrated dial allows for easy adjustments to outlet pressure in high-flow applications.

At ±0.1% accuracy, use these regulators in sensitive applications where constant, consistent pressure is important.

Mount these regulators to a 35 mm DIN rail or a wall with one of the two included brackets.

Designed for control applications that require high reliability and repeatability, these regulators translate electrical signals to output pressure.

Keep an eye on the output pressure in high-flow applications—these regulators have a display so you can monitor your application locally.

Use a single air supply to meet the pressure requirements of multiple applications—connect one of these manifolds to your air line, and then set a different output pressure for each station.

Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator.

Each of these filter/dryers has two desiccant towers—one that absorbs moisture, particles, and oil in the air while the other reactivates saturated desiccant so you have an uninterrupted supply of clean, dry compressed air.

These dryer/filters have a clay desiccant that removes moisture, oil, and particles, so there’s no need to install a separate filter and dryer. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.

Get dry compressed air in high-pressure systems—these dryers have a maximum pressure rating of 300 psi. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.

For use with Norgren modular compressed air systems, once aftercoolers and separators have removed the bulk of the water, use one of these desiccant-filled dryers to remove any remaining moisture in your air line.

These all-in-one dryer/filters eliminate the need for individual dryers, separators, and filters. They cool air through refrigeration to condense water vapor for removal.

An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Parker filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A filter, regulator, and lubricator with push-to-connect fittings are combined to provide clean, lubricated compressed air at your required pressure. Fittings make a tight seal around tubing.

With one outlet port before the lubricator and one after, these filter/regulator/lubricators work in systems that require lubrication in some lines but not in others.

These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.

A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.

Connect ARO modular filter/regulator/lubricator components with the same series number.

Connect Festo modular filter/regulator/lubricator components with the same series number.