Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Cleaned and double bagged in an ISO Class 3 and Fed. Spec. Class 1 clean room for protection from contamination, these regulators are suitable for use in clean rooms.

A lower profile than our other compressed air regulators makes these regulators a better fit in tight spots.

Designed for installation directly to your air-powered tool, these regulators maintain the set air pressure.

A 316 stainless steel housing allows these regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

Fit these regulators in tight spaces to adjust and maintain air pressure in sensitive applications where constant, consistent pressure is important.

A 316 stainless steel housing provides superior corrosion resistance. With an accuracy of ±0.1 psi, use these regulators in sensitive applications where constant, consistent pressure is important.

At ±0.1% accuracy, use these regulators in sensitive applications where constant, consistent pressure is important.

Keep an eye on the output pressure in high-flow applications—these regulators have a display so you can monitor your application locally.

Mount these regulators to a 35 mm DIN rail with the included bracket.

Run up to four air-powered tools from a single air supply.

Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags.

Mount these filter/regulators to a 35 mm DIN rail with the included brackets.

A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.

An SMC filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Parker filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Festo filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A filter, regulator, and lubricator with push-to-connect fittings are combined to provide clean, lubricated compressed air at your required pressure. Fittings make a tight seal around tubing.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

A polyurethane bowl provides good chemical resistance for use with synthetic compressor oils and cleaning fluids.

The housing and bowl are 316 stainless steel to handle extremely corrosive environments such as those in semiconductor, marine, chemical, and paper industries.

Use these filters to extend the service life of air-powered tools and then throw them away when you're done.

Protect small air-powered tools, such as impact wrenches, ratchet wrenches, grinders, and screwdrivers.

Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles.

Replace the filter element in your Norgren modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Often used in medical device manufacturing and food-processing facilities, these filters have a stainless steel element that can be sterilized in an autoclave.

Housing and bowl are 304 stainless steel for good corrosion resistance in damp environments.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Use these filters to extend the service life of air-powered tools and equipment and then throw them away when you're done.

A polyurethane bowl offers good chemical resistance for use with synthetic compressor oils and aggressive cleaning agents.

Designed for use in main lines with high contamination, these filters remove oil to extend the service life of air-powered tools and equipment.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.