Ensure the correct cushioning, even with changing loads. These cylinders have self-adjusting cushions that automatically compensate for changes in load and speed. They have an extruded-aluminum body so there's no open spaces for debris to collect. All have a magnetic piston so you can use them with sensors (sold separately) to activate relays and controllers.

For technical drawings and 3-D models, click on a part number.

Mount these cylinders directly to equipment in environments where contamination is a concern, such as electronics manufacturing. Use the threaded through-holes on the face to connect to equipment, or mount them with attachments (not included). Hook these cylinders into your compressed air line to push and pull loads. They’re double-acting, so they operate at full force in either direction. The magnetic piston inside these cylinders can activate relays and controllers when used with a sensor (not included). As the piston moves past the sensor, the sensor activates. You can use multiple sensors—attach one for each action you want to trigger.

Cylinders that are rated for use in Fed. Std. Class 1,000 and ISO Class 6 clean rooms have a low-friction polyurethane seal that wears slower and creates fewer particles than standard seals. As the rod moves, the seal wipes its surface clean of grease particles. The end caps are tightly crimped to stop air from leaking out. These cylinders have an ISO industry-standard footprint that fits common mounting patterns.

For technical drawings and 3-D models, click on a part number.

Combine the lifting power of a vacuum with the actuation of an air cylinder to automate processes such as pick and place. With a hollow rod that’s threaded to connect to a vacuum pad, these cylinders let you move items with suction. They’re double acting, meaning they pull loads as well as push them, and do so with equal force. Mount them directly to equipment or with attachments (not included) using the threaded through-holes on the face and sides of the body.

The piston is magnetic, so you can use these cylinders with sensors (not included) to activate relays and controllers. When the piston moves past a sensor, the sensor activates. You can use multiple sensors—one for each action you want to trigger.

For technical drawings and 3-D models, click on a part number.

Convenient for use with devices such as grippers and printing heads, these air slides have a nonrotating head that provides steady motion and a larger mounting area than air cylinders. Air slides have two guide rods parallel to the piston that keep the head from twisting as it extends and retracts.

The magnetic piston inside these slides can activate relays and controllers when used with a sensor (not included). When the piston moves past the sensor, the sensor activates. You can use multiple sensors—attach one for each action to trigger.

For technical drawings and 3-D models, click on a part number.

Prevent sudden drops while raising and lowering grippers and other pick-and-place equipment. A safety end lock engages when air pressure is lost, stopping loads from falling or slamming against the air slide. The air slide guide rods keep the head from twisting as it extends and retracts for steadier motion than air cylinders. These air slides also have a larger mounting surface area compared to air cylinders, so you can mount or push larger items at the end of the slide.

The piston is magnetic, so it can activate relays and controllers when used with a sensor (sold separately). When the piston moves past the sensor, the sensor activates. You can use multiple sensors—attach one for each action to trigger.

For technical drawings and 3-D models, click on a part number.

Prevent dust and fine particles from contaminating your clean room or damaging sensitive electronics while moving grippers and other pick-and-place equipment. These air slides have a port that connects to a vacuum or exhaust system to remove particles created by friction inside the slide before they contaminate your space. The guide rods keep the head from twisting as it extends and retracts for steadier motion than air cylinders. These air slides also have a larger mounting surface area compared to air cylinders, so you can mount or push larger items at the end of the slide.

The piston is magnetic, so you can use these slides with sensors (sold separately) to activate relays and controllers. When the piston moves past a sensor, the sensor activates. You can use multiple sensors—one for each action you want to trigger.

For technical drawings and 3-D models, click on a part number.

Push one object while pulling another—when one head on these air slides extends, the other retracts. Often used in pick-and-place systems across two surfaces, such as parallel conveyors, they can take the place of two standard air slides. With guide rods that keep the heads from twisting, they move more steadily than air cylinders. They also have a larger mounting area.

The piston is magnetic, so you can use these slides with sensors (sold separately) to activate relays and controllers. When the piston moves past a sensor, the sensor activates. You can use multiple sensors—one for each action you want to trigger.

For technical drawings and 3-D models, click on a part number.