Rods along the barrel of these cylinders secure the end caps and shield the barrel from impact.

Sensor-ready cylinders have a magnetic piston that can trigger one or more sensors (sold separately) to activate relays and controllers.

Cushioned cylinders have adjustable air cushions that absorb piston impact to minimize wear and noise. Turn the screws at each port to adjust the amount of cushion.

For technical drawings and 3-D models, click on a part number.

Made to fit the most common mounting footprint, these cylinders have an NFPA (National Fluid Power Association) industry-standard footprint, ensuring easy interchangeability. They have a magnetic piston, so you can use sensors (sold separately) to activate relays and controllers.

Cushioned cylinders have adjustable air cushions that absorb piston impact to minimize wear and noise. Turn the screws at each port to adjust the amount of cushion.

Made with an NFPA industry standard footprint and a stainless steel body, these cylinders are easily interchanged with the most common mounting footprint and withstand chemicals, corrosive solutions, and washdowns. They have a rod wiper that keeps contaminants out. These cylinders contain a magnetic piston that can activate relays and controllers when you attach one or multiple sensors (not included). Use one sensor for each action you want to trigger. When the piston moves past the sensor, the sensor activates. These cylinders have self-adjusting cushions that automatically compensate for changes in load and speed.

For technical drawings and 3-D models, click on a part number.

With no external moving parts, these air slides provide a long stroke, but have a static footprint—only the carriage on top moves. They have a magnetic piston so you can use them with sensors (not included) to activate relays and controllers.

Sensor-ready slides have adjustable air cushions that absorb piston impact to minimize wear and noise. Turn the screws to adjust the amount of cushion. Barrel, end caps, and slide are aluminum.

Sensor-ready low-profile slides have a shorter height than standard slides to fit in tight locations. Barrel is aluminum and end caps and carriage are plastic.

For technical drawings and 3-D models, click on a part number.

Move heavy loads back and forth—these air slides have over twice the capacity as standard rodless ones. They are often used for high-volume diverting and sorting. Only the carriage moves, so they provide a long stroke but have a static footprint.

The piston is magnetic, so you can use these slides with sensors (sold separately) to activate relays and controllers. When the piston moves past a sensor, the sensor activates. You can use multiple sensors—one for each action you want to trigger.

For technical drawings and 3-D models, click on a part number.

Made from stainless steel for excellent corrosion resistance in damp environments. These gas springs have a bleed valve so you can release gas to permanently reduce the force to meet your requirements. They come charged to their maximum force. Use the included tool to open the valve and bleed off the gas—there's no disassembly required. Release gas in very small increments and then test your application. Once gas is released, the force is permanently reduced. Gas springs have an eyelet end fitting on each end; requires an eyelet mounting bracket (sold separately) for mounting.

Rod protectors (sold separately) prevent impact damage.

Regulator kits (sold separately) indicate how much gas you’re releasing. Kits contain fittings to connect to your gas spring, a pressure gauge, a manifold, and instructions.

For technical drawings and 3-D models, click on a part number.