Convenient for use with devices such as grippers and printing heads, these air slides have a nonrotating head that provides steady motion and a larger mounting area than air cylinders. Air slides have two guide rods parallel to the piston that keep the head from twisting as it extends and retracts.

The magnetic piston inside these slides can activate relays and controllers when used with a sensor (not included). When the piston moves past the sensor, the sensor activates. You can use multiple sensors—attach one for each action to trigger.

For technical drawings and 3-D models, click on a part number.

Prevent sudden drops while raising and lowering grippers and other pick-and-place equipment. A safety end lock engages when air pressure is lost, stopping loads from falling or slamming against the air slide. The air slide guide rods keep the head from twisting as it extends and retracts for steadier motion than air cylinders. These air slides also have a larger mounting surface area compared to air cylinders, so you can mount or push larger items at the end of the slide.

The piston is magnetic, so it can activate relays and controllers when used with a sensor (sold separately). When the piston moves past the sensor, the sensor activates. You can use multiple sensors—attach one for each action to trigger.

For technical drawings and 3-D models, click on a part number.

Prevent dust and fine particles from contaminating your clean room or damaging sensitive electronics while moving grippers and other pick-and-place equipment. These air slides have a port that connects to a vacuum or exhaust system to remove particles created by friction inside the slide before they contaminate your space. The guide rods keep the head from twisting as it extends and retracts for steadier motion than air cylinders. These air slides also have a larger mounting surface area compared to air cylinders, so you can mount or push larger items at the end of the slide.

The piston is magnetic, so you can use these slides with sensors (sold separately) to activate relays and controllers. When the piston moves past a sensor, the sensor activates. You can use multiple sensors—one for each action you want to trigger.

For technical drawings and 3-D models, click on a part number.

For flexibility with your setup, mount equipment on top or in front of these air slides. Mount on top to reduce the space you need to move a full stroke length. Often used with gripping equipment, they have a larger mounting area than air cylinders. They also have two guide rods that keep the head steady as it extends and retracts.

A magnetic piston inside these slides activates relays and controllers when used with a sensor (sold separately). When the piston moves past the sensor, the sensor activates. You can use multiple sensors—one for each action you want to trigger.

For technical drawings and 3-D models, click on a part number.

Move optical equipment and other electronics sensitive to dust and fine particles from a range of mounting positions. These air slides have a port that connects to a vacuum or exhaust system to remove particles created by friction inside the slide before they contaminate your space. Compared to standard air slides, these slides have a platform that extends the mounting surface to the top of the slide. This design reduces the total space needed for a full stroke length. Two guide rods keep the head steady as it extends and retracts.

A magnetic piston inside these slides activates relays and controllers when used with a sensor (sold separately). When the piston moves past the sensor, the sensor activates. You can use multiple sensors—one for each action you want to trigger.

For technical drawings and 3-D models, click on a part number.

Push one object while pulling another—when one head on these air slides extends, the other retracts. Often used in pick-and-place systems across two surfaces, such as parallel conveyors, they can take the place of two standard air slides. With guide rods that keep the heads from twisting, they move more steadily than air cylinders. They also have a larger mounting area.

The piston is magnetic, so you can use these slides with sensors (sold separately) to activate relays and controllers. When the piston moves past a sensor, the sensor activates. You can use multiple sensors—one for each action you want to trigger.

For technical drawings and 3-D models, click on a part number.

Space out parts on your conveyor line or vibratory feeder. Also known as escapements, these air cylinders have at least one finger that extends to hold parts and then retracts to release them. The fingers are built to withstand force from the side, so your part won’t slip past. All fingers have tapped holes on all five of their faces, so you can mount attachments to any side of them.

One-finger cylinders can be spaced as far away from each other as needed, making them the best choice for use with large parts. Create a system of these air cylinders by placing multiple along your line to control the timing and speed with which they meter parts.

Two-finger cylinders are good for precisely positioning items for sealing, labeling, and inspection. Operating on fixed timing and sequencing, they extend one finger to stop a part then extend the other finger to separate it. The two fingers hold the part like you would between your thumb and index finger. When the part is ready to be released, they retract the first finger while the other finger continues to hold back other parts. Lastly, they retract the other finger to let the next part through.

For technical drawings and 3-D models, click on a part number.