Select the dimensions you need for custom-sized frames.

A compound inhibits mildew and mold growth.

The filter material extends beyond the frame for a tight fit, creating a seal to prevent air from bypassing the filter around its edges.

Stop unfiltered air from passing between panels or around filter tracks.

A thick-gauge metal frame makes these filters more durable than other reusable filters.

Also known as metal mesh filters. These filters can be washed and reused.

Magnetic strips on the back of the frame make these filters easy to install and remove.

Rated MERV 11, these filters capture particles down to 1 micron.

With tight pleats, these filters have a larger surface area than filters with standard pleats for improved efficiency and an even longer life. These filters strike a good balance of filtering efficiently while allowing airflow, making them a more cost-effective option than higher rated filters.

Eliminate heavy odors with these filters that have 30 times the odor removing ability of standard odor-removal air filters.

Hold panel filters in place.

Cut these pads to the size you need.

These pads are an economical choice for protecting more expensive filters that catch finer particles.

Wash and reuse these pads. Cut to the size you need.

Wrapped in aluminum mesh for added support, these filters can be used without a frame.

Carbon granules inside these filters remove odors from the air. Cut them to the size you need.

Replace the filter roll in your automatic filtering equipment.

The rigid frame on these filters withstands fluctuations in airflow, such as those created by variable air volume systems.

Purify the air in your most sensitive environments. These filters remove 99.999% of dust and other particles, so they're best in areas where high air purity matters, such as semiconductor, pharmaceutical, and aerospace facilities.

Carbon granules in these filters remove odors from the air. The rigid frame won’t bend or twist from sudden changes in airflow, such as those created by variable air volume systems.

Clean the air going into small blowers and air-powered equipment in tight spaces.

With a threaded connection on both ends, these filters can be installed anywhere in your pipeline to keep dust and debris out of your system.

Install these filters between your high-vacuum chamber and the inlet of your pump to remove dust, water vapor, and other contaminants from the system and protect the pump. Commonly used in vacuum-furnace and coating applications, they have a polyester filter element that traps particles as small as 5 microns.

Use one of these compact filters in a tight spot, or combine up to ten for a manifold application.

Clamp these exhaust filters onto oil-sealed, high-vacuum pumps to remove oil, smoke, and other contaminants and keep workplace air clean. Once captured, the oil returns to the pump to be reused.

Stop oil mist and smoke from exiting your equipment and into your environment. These exhaust filters are commonly used with small oil-sealed vacuum pumps.

Remove small particles in lines that reach up to 5,000 psi to protect sensitive equipment, such as hydraulic controls.

Commonly used with high-flow, air-powered equipment, such as diaphragm pumps and valves, these mufflers reduce noise and filter exhaust fumes without restricting flow.

Made entirely of stainless steel, these mufflers stand up to harsh, corrosive environments.

In addition to a filter, these mufflers have a wool felt disc to trap oil mist.

These mufflers exhaust through narrow holes on one end to provide a concentrated blast of air. Use them to eject items from your conveyor and direct exhaust away from delicate applications.

With a threaded connection on both ends, these mufflers can be installed anywhere in your line.

Don’t let an unexpected clog interrupt your work. These mufflers have a filter that slides up slowly as it clogs to indicate when the muffler should be replaced. They reduce noise by 30-35 dBA

With a threaded connection on both ends, these mufflers can be installed anywhere in your line. They reduce noise by up to 45 dB.

These breather vents withstand corrosion in damp environments.

These breather vents are rated NEMA 6 to withstand periodic submersion in water.

Minimize moisture buildup in enclosures. Also known as drain plugs, these breather vents have a small outlet that allows condensation to drain.

Secure access to vented openings in pipe and tanks—the cap can be locked to prevent tampering.