Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air—joiner clamps connect these regulators into your ARO setup.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air—joiner clamps connect these regulators into your Aventics setup.

An internal check valve permits reverse flow, so these regulators work with double-acting cylinders.

No need to worry about unintentional changes to your pressure setting—these regulators maintain a fixed outlet pressure.

Use these regulators to adjust and maintain the pressure of your tubing air lines.

A 316 stainless steel housing allows these regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

Cleaned and double bagged in an ISO Class 3 and Fed. Spec. Class 1 clean room for protection from contamination, these regulators are suitable for use in clean rooms.

At ±0.1% accuracy, use these regulators in sensitive applications where constant, consistent pressure is important.

Fit these regulators in tight spaces to adjust and maintain air pressure in sensitive applications where constant, consistent pressure is important to generate precise force and movement.

Prevent unintentional or unauthorized pressure changes in lines that demand constant, consistent air pressure. These regulators have a tamper-resistant cover that threads over the adjusting screw to block access.

Mount these regulators to a 35 mm DIN rail with the included bracket. Designed for control applications that require high reliability and repeatability, they translate electrical signals to output pressure.

View and control output pressure remotely and at the source.

Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator.

Run up to four air-powered tools from a single air supply.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

With ±0.2 psi accuracy, these filter/regulators provide more precise control than our other compressed air filter/regulators.

Mount these filter/regulators to a 35 mm DIN rail with the included brackets. The filter and regulator are joined top-to-bottom, so they fit in the same space as a filter alone.

No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.

A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Festo filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

No need for thread adapters—these filter/regulator/lubricators have an NPT inlet and a BSPP outlet.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Distribute compressed air to multiple locations from a single source.

Replace the filter element in your SMC modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Maintain contaminant-free standards in clean room environments. These valves come cleaned and bagged to Fed. Spec. Class 100 and ISO Class 5 clean room standards and have a 316 stainless steel body with a smooth finish to resist dust collection.