The included hose is ready to connect to your air supply.

Designed to reduce noise, these blowguns are quieter than similar standard guns.

Also known as air-shield and safety-shield blowguns, an outer air curtain deflects flying chips and dust while the center airstream blows away debris.

The lightweight plastic construction makes these blowguns more comfortable to hold than metal.

Also known as air-shield and safety-shield blowguns, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Compact enough to carry with you, these guns have a built-in quick-disconnect hose coupling for easy connection to an air line.

Connect the included hose to your air supply and these blowguns are ready to use.

Increase your reach with the telescoping nozzle.

Maximize comfort and minimize strain with these lightweight guns.

The most powerful blowguns we sell, these use compressed air to clean and blow debris.

Air flows out of the side of the nozzle to clean air filters, radiators, and inside recesses.

The flat nozzle distributes air over a wide area.

Bend the stand's flexible arm to position your gun and keep it in place. Use the included foot pedal to activate airflow and static elimination.

Also known as siphon guns, these spray air and liquids at the same time. Push the lever and the airflow creates suction that draws water, cleaning solution, or other liquids through the hose.

A nonconductive plastic nozzle and tip protect against accidental contact with live electrical circuits. These blowguns are tested to 1,000 volts to meet IEC 60900.

The extra length allows access into hard-to-reach areas.

Also known as air-shield and safety-shield nozzles, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Control consumption and noise by adjusting the airflow.

Focus air with pinpoint precision.

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

Adjust airflow to control consumption and noise.

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

The magnetic base mounts to your work surface and has a control valve for adjusting airflow.

Clean parts with compressed air without propelling fluids and debris all over your shop. These vacuum/blowers quickly blow coolant, oil, and chips off your parts while a vacuum sucks them into a removable drum for recycling or disposing of them.