Maximize comfort and minimize strain with these lightweight blowguns. They provide more than two times the airflow of standard guns. Pull the trigger to adjust the airflow rate from a puff to a blast. To spray liquids, connect a water line to the inlet. Guns conform to OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure. Volume (dB) is measured 3 ft. from the blowgun at 100 psi.

These nozzles handle coolant pressure up to 150 psi. Push on the nozzle to adjust the angle of the coolant stream.

Nozzles with NPT and BSPT threads will fit both NPT and BSPT threaded holes.

For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi. They fit both NPT and BSPT threaded holes.

Use an adjustment tool (sold separately) to push on the nozzle tip to adjust the angle of the coolant stream.

The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi. Twist the tip to change the spray pattern or to stop flow completely. Nozzles pivot up and down and rotate 360° for positioning. They fit both NPT and BSPT threaded holes.

For high-pressure coolant lines, these nozzles withstand pressure up to 500 psi. They snap into the sockets on CNC machines and swivel for positioning.

Styles A and B can be cut to any length and bent in any direction. Style A has one nozzle. Style B has two nozzles.

Style C can be used with a tip extension (sold separately) to direct coolant straight to the cutting edge.

These nozzles handle coolant pressure up to 150 psi. Snap them into the sockets on CNC machines. To aim the coolant stream, insert a hex wrench or similar tool into the orifice and rotate the nozzle tip.