Zinc Air Nozzles | McMaster-Carr

Filter by

Airflow Pattern

Air Inlet Pipe Size

Shape

Nozzle Length

Nozzle Type

Air Inlet Gender

Air Inlet Thread Type

Air Outlet Connection Port

Hose

Pipe

Specifications Met

OSHA Compliant 29 CFR 1910.177

OSHA Compliant 29 CFR 1910.242

OSHA Compliant 29 CFR 1910.95

Air Inlet Connection Port

Hose

Pipe

Air Inlet Connection

Threaded

Air Outlet Thread Type

Maximum Inlet Pressure

Material

Air Outlet Pipe Size

Tip Width

Nozzle Tip Material

Airflow Control

RoHS

Compliant with Exemptions

REACH

For Use With

Airflow Adjustability

Adjustable

Fixed

Air Outlet Gender

Female

Air Consumption @ Pressure

5.5 ft³/min @ 100 psi

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Forward

How can we improve?

83 Products

Air Nozzles

These nozzles are engineered for the most efficient air consumption.

Nozzles that meet OSHA 29 CFR 1910.242 conform to requirements for maximum air outlet pressure. Nozzles that meet OSHA 29 CFR 1910.95 conform to requirements for noise.

1/8 NPT Male Inlet
	Air Consumption	Max. Temp., °F	Volume	Tip OD	O'all Lg.	Max. Inlet Pressure, psi	Specifications Met		Each
Zinc
C	15 cfm @ 100 psi	158°	81 dBA @ 80 psi	5/16"	2 3/16"	145	OSHA Compliant 29 CFR 1910.242	00000000	000000
1/8 NPT Female Inlet
Zinc
E	12 cfm @ 100 psi	250°	71 dBA @ 80 psi	1/2"	1 3/16"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	00000
1/4 NPT Female Inlet
Zinc
G	18 cfm @ 100 psi	250°	74 dBA @ 80 psi	3/4"	1 3/4"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	00000
3/8 NPT Female Inlet
Zinc
E	44 cfm @ 100 psi	250°	82 dBA @ 80 psi	3/4"	1 5/8"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	000000
1/2 NPT Male Inlet
Zinc
L	73 cfm @ 100 psi	250°	87 dBA @ 80 psi	1"	2 3/4"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	000000
1/2 NPT Female Inlet
Zinc
E	73 cfm @ 100 psi	250°	87 dBA @ 80 psi	1"	2"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	000000
3/4 NPT Male Inlet
Zinc
L	110 cfm @ 100 psi	250°	96 dBA @ 80 psi	1 1/4"	3 1/2"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	000000
3/4 NPT Female Inlet
Zinc
E	110 cfm @ 100 psi	250°	96 dBA @ 80 psi	1 1/4"	2 1/2"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	000000

Wide-Airflow Air Nozzles

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles. Volume (dBA) is measured 3 ft. from the nozzle at 80 psi.

Nozzles that are OSHA Compliant 29 CFR 1910.242 conform to requirements for maximum air outlet pressure. Nozzles that are OSHA Compliant 29 CFR 1910.95 conform to requirements for noise.

				Tip
	Air Consumption	Max. Temp., °F	Volume	Wd.	Thick.	O'all Lg.	Max. Inlet Pressure, psi	Specifications Met		Each
1/8 NPT Male Inlet
Zinc
A	13 cfm @ 100 psi	158°	80 dBA @ 80 psi	15/16"	1/8"	2 3/16"	145	OSHA Compliant 29 CFR 1910.242	00000000	000000
1/8 NPT Female Inlet
Zinc
A	25 cfm @ 100 psi	158°	85 dBA @ 80 psi	1 13/16"	3/16"	3 1/8"	145	OSHA Compliant 29 CFR 1910.242	00000000	000000
1/8 BSPP Male Inlet
Zinc
A	12 cfm @ 85 psi	155°	82 dBA @ 80 psi	15/16"	3/16"	2 3/16"	145	OSHA Compliant 29 CFR 1910.242	0000000	00000
1/4 NPT Male Inlet
Zinc
A	25 cfm @ 100 psi	158°	83 dBA @ 80 psi	1 7/8"	1/8"	3 1/8"	145	OSHA Compliant 29 CFR 1910.242	00000000	000000
1/4 NPT Female Inlet
Zinc
E	26 cfm @ 100 psi	250°	75 dBA @ 80 psi	2"	7/16"	2 1/16"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	000000
E	37 cfm @ 80 psi	250°	83 dBA @ 80 psi	2"	7/16"	2 1/16"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	0000000	000000
1/4 BSPP Male Inlet
Zinc
A	22 cfm @ 85 psi	155°	85 dBA @ 80 psi	1 13/16"	3/16"	3 1/8"	145	OSHA Compliant 29 CFR 1910.242	0000000	000000
1/4 BSPT Female Inlet
Zinc
E	37 cfm @ 80 psi	250°	83 dBA @ 80 psi	2"	7/16"	2 1/16"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	0000000	000000

Low-Profile Wide-Airflow Air Nozzles

At less than 2" long and with a wide airflow pattern, these nozzles are ideal for tight spaces where you need to distribute air over a wider area than a focused-airflow nozzle.

Nozzles that meet OSHA 29 CFR 1910.242 conform to requirements for maximum air outlet pressure. Nozzles that meet OSHA 29 CFR 1910.95 conform to requirements for noise.

				Tip
	Air Consumption	Max. Temp., °F	Volume	Wd.	Thick.	O'all Lg.	Max. Inlet Pressure, psi	Specifications Met		Each
1/8 NPT Female
Zinc
B	11 cfm @ 80 psi	250°	75 dBA @ 80 psi	1"	3/8"	1 5/16"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	0000000	000000
B	18 cfm @ 80 psi	250°	82 dBA @ 80 psi	1"	3/8"	1 5/16"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	0000000	00000
1/8 BSPT Female
Zinc
B	18 cfm @ 80 psi	250°	82 dBA @ 80 psi	1"	3/8"	1 5/16"	250	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	0000000	00000

Right-Angle Wide-Airflow Air Nozzles

Zinc

Air blows out of these nozzles at a right angle in a wide pattern, distributing air over a wider area than focused-airflow nozzles. All conform to OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure.

			Tip
Air Consumption	Max. Temp., °F	Volume	Wd.	Thick.	O'all Lg.	Max. Inlet Pressure, psi	Specifications Met		Each
1/8 NPT Male
Zinc
15 cfm @ 100 psi	155°	84 dBA @ 80 psi	15/16"	3/16"	15/16"	145	OSHA Compliant 29 CFR 1910.242	0000000	000000
1/8 BSPP Male
Zinc
13 cfm @ 85 psi	155°	84 dBA @ 80 psi	15/16"	3/16"	15/16"	145	OSHA Compliant 29 CFR 1910.242	0000000	00000

Rotating Air Nozzles

As compressed air flows through these nozzles, they rotate to efficiently and evenly blow off large areas.

Air Nozzles

Air Inlet								O'all
Thread Size	Thread Pitch	Gender	No. of Air Outlets	Air Consumption	Max. Temp., °F	Volume	Tip OD	Lg.	Wd.	Max. Inlet Pressure, psi	Material	Specifications Met		Each
M27	2 mm	Male	2	15 cfm @ 100 psi	155°	83 dBA @ 80 psi	5/16"	4 15/16"	6 5/16"	145	Zinc	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	0000000	0000000

Adapter Fittings

Pipe Connection			Hose Connection
Size	Thread Type	Gender	Thread Size	Thread Pitch	Gender	O'all Lg.	Material		Each
1/4	BSPP	Female	M27	2 mm	Female	2 3/4"	Aluminum	00000000	0000000

Wide-Airflow Bend-and-Stay Air Nozzles

The flat shape distributes air over a wider area than focused-airflow nozzles. These nozzles are attached to a flexible hose that bends and holds its shape until you reposition it. All conform to OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure and OSHA 29 CFR 1910.95 requirements for noise.

Air Inlet						Tip
Pipe Size	Thread Type	Gender	Air Consumption	Max. Temp., °F	Volume	Wd.	Thick.	O'all Lg.	Max. Inlet Pressure, psi	Hose Material	Specifications Met		Each
Zinc
1/4	NPT	Male	12 cfm @ 100 psi	140°	75 dBA @ 80 psi	1"	3/8"	25"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	0000000
1/4	NPT	Male	14 cfm @ 100 psi	140°	75 dBA @ 80 psi	1"	3/8"	13 11/16"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	000000
1/4	NPT	Male	21 cfm @ 100 psi	140°	85 dBA @ 80 psi	1"	3/8"	25"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	000000
1/4	NPT	Male	26 cfm @ 100 psi	140°	80 dBA @ 80 psi	2"	3/8"	7 3/4"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	000000
1/4	NPT	Male	26 cfm @ 100 psi	140°	80 dBA @ 80 psi	2"	3/8"	13 3/4"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	000000
1/4	NPT	Male	26 cfm @ 100 psi	140°	80 dBA @ 80 psi	2"	3/8"	19 3/4"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	000000
1/4	NPT	Male	26 cfm @ 100 psi	140°	80 dBA @ 80 psi	2"	3/8"	25 3/4"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	000000
1/4	NPT	Male	45 cfm @ 100 psi	140°	85 dBA @ 80 psi	2"	1/2"	7 3/4"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	000000
1/4	NPT	Male	45 cfm @ 100 psi	140°	85 dBA @ 80 psi	2"	1/2"	13 3/4"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	000000
1/4	NPT	Male	45 cfm @ 100 psi	140°	85 dBA @ 80 psi	2"	1/2"	19 3/4"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	000000
1/4	NPT	Male	45 cfm @ 100 psi	140°	85 dBA @ 80 psi	2"	1/2"	37 3/4"	250	PVC Plastic	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	000000000	000000

Magnet-Mount Bend-and-Stay Air Nozzles

Zinc Nozzle

The magnetic base with an attached flexible hose mounts to your work surface. Bend the hose to position the nozzle and keep it in place. Use the control valve on the base to adjust airflow.

Zinc nozzle meets OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure and OSHA 29 CFR 1910.95 requirements for noise.

	Air Inlet
Number of Hoses	Pipe Size	Thread Type	Gender	Air Consumption	Max. Temp., °F	Volume	Tip OD	O'all Lg.	Max. Magnetic Pull, lbs.	Max. Inlet Pressure, psi	Material	Specifications Met		Each
Zinc Nozzle
1	1/4	NPT	Female	16 cfm @ 100 psi	140	74 dBA @ 80 psi	3/4"	15 11/16"	100	150	Zinc	OSHA Compliant 29 CFR 1910.242, OSHA Compliant 29 CFR 1910.95	00000000	0000000

Blowguns

Lever Control

Push-Button Control

Trigger Control with Plain Grip

These blowguns conform to OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure.

				Air Inlet
Nozzle Lg.	Air Consumption	Volume	Max. Inlet Pressure, psi	Pipe Size	Thread Type	Gender	Body Material	Nozzle Tip Material	Grip Style	Specifications Met		Each
Straight
Lever Control
1/2"	11 cfm @ 100 psi	Not Rated	150	1/4	NPT	Female	Chrome-Plated Zinc	Brass	Cushion	OSHA Compliant 29 CFR 1910.242	0000000	000000
1 1/2"	11 cfm @ 100 psi	Not Rated	150	1/4	NPT	Female	Chrome-Plated Zinc	Brass	Cushion	OSHA Compliant 29 CFR 1910.242	0000000	00000
3"	11 cfm @ 100 psi	Not Rated	150	1/4	NPT	Female	Chrome-Plated Zinc	Steel	Cushion	OSHA Compliant 29 CFR 1910.242	0000000	00000
4"	5.5 cfm @ 100 psi	Not Rated	150	1/4	NPT	Female	Zinc	Brass	Plain	OSHA Compliant 29 CFR 1910.242	0000000	00000
Push-Button Control
1/2"	10 cfm @ 100 psi	Not Rated	150	1/4	NPT	Female	Powder-Coated Zinc	Brass	Plain	OSHA Compliant 29 CFR 1910.242	0000000	00000
Pistol
Trigger Control
5/8"	10 cfm @ 100 psi	Not Rated	120	1/4	NPT	Female	Chrome-Plated Zinc	Brass	Plain	OSHA Compliant 29 CFR 1910.242	0000000	00000

Blowguns with Nonmarring Tip

With Straight Nozzle, Lever Control, and Plain Grip

With Straight Shape, Angled Nozzle, and Lever Control

The rubber tip won't damage your workpiece.

Blowguns with angled nozzle can direct air over and around obstacles.

Blowguns
				Air Inlet								Replacement Nozzles
Nozzle Lg.	Air Consumption	Volume	Max. Inlet Pressure, psi	Pipe Size	Thread Type	Gender	Body Material	Nozzle Tip Material	Grip Style		Each		Each
Straight Shape with Straight Nozzle
Lever Control
4 1/4"	12 cfm @ 100 psi	Not Rated	150	1/4	NPT	Female	Zinc	Rubber	Plain	0000000	000000	0000000	00000
Straight Shape with Angled Nozzle
Lever Control
4 1/4"	12 cfm @ 100 psi	Not Rated	150	1/4	NPT	Female	Zinc	Rubber	Plain	0000000	00000	0000000	0000

Chip-Guard Blowguns

Straight

Also known as air-shield and safety-shield blowguns, a center airstream blows away debris while an outer air curtain deflects flying chips and dust. These conform to OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure. Volume (dB) is measured 3 ft. from the blowgun at 100 psi.

				Air Inlet
Nozzle Lg.	Air Consumption	Volume, dB	Max. Inlet Pressure, psi	Pipe Size	Thread Type	Gender	Body Material	Nozzle Tip Material	Specifications Met		Each
Straight
1/2"	11 cfm @ 100 psi	Not Rated	150	1/4	NPT	Female	Chrome-Plated Zinc	Brass	OSHA Compliant 29 CFR 1910.242	0000000	000000

Valve Seal Repair Kits for Pistol Guns

0000000

Each

000000

Blowguns with Air Hose

Connect the included hose to your air supply and these guns are ready to use. They conform to OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure.

		Hose				Air Inlet
Nozzle Lg.	Air Consumption	Lg., ft.	Material	Volume	Max. Inlet Pressure, psi	Pipe Size	Thread Type	Gender	Body Material	Nozzle Tip Material	Specifications Met		Each
Straight
1/2"	11 cfm @ 100 psi	12	Nylon Plastic	Not Rated	150	1/4	NPT	Female	Chrome-Plated Zinc	Brass	OSHA Compliant 29 CFR 1910.242	0000000	000000
1/2"	11 cfm @ 100 psi	25	Nylon Plastic	Not Rated	150	1/4	NPT	Female	Chrome-Plated Zinc	Brass	OSHA Compliant 29 CFR 1910.242	0000000	00000

Inline Blowguns

Operate a blowgun without disconnecting your air tool—this gun fits between the tool and air hose. Good for blowing away debris after using an air-powered sander or grinder. Press the button on the gun to activate airflow. It conforms to OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure.

				Air Inlet
Nozzle Lg.	Air Consumption	Volume	Max. Inlet Pressure, psi	Pipe Size	Thread Type	Gender	Body Material	Nozzle Tip Material	Specifications Met		Each
Straight
7/8"	10 cfm @ 100 psi	Not Rated	150	1/4	NPT	Female	Chrome-Plated Zinc	Brass	OSHA Compliant 29 CFR 1910.242	000000	000000

Extended-Reach Blowguns

The extra length lets you access hard-to-reach areas. These blowguns conform to OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure. Volume (dB) is measured 3 ft. from the blowgun at 100 psi.

Straight

Blowguns
				Air Inlet								Repl. Nozzles
Nozzle Lg.	Air Consumption	Volume, dB	Max. Inlet Pressure, psi	Pipe Size	Thread Type	Gender	Body Material	Nozzle Tip Material	Specifications Met		Each		Each
Straight
6"	11 cfm @ 100 psi	Not Rated	120	1/4	NPT	Female	Chrome-Plated Zinc	Steel	OSHA Compliant 29 CFR 1910.242	0000000	000000	0000000	000000
8"	11 cfm @ 100 psi	Not Rated	120	1/4	NPT	Female	Chrome-Plated Zinc	Steel	OSHA Compliant 29 CFR 1910.242	0000000	00000	0000000	00000
12"	11 cfm @ 100 psi	Not Rated	120	1/4	NPT	Female	Chrome-Plated Zinc	Steel	OSHA Compliant 29 CFR 1910.242	0000000	00000	0000000	00000
18"	11 cfm @ 100 psi	Not Rated	120	1/4	NPT	Female	Chrome-Plated Zinc	Steel	OSHA Compliant 29 CFR 1910.242	0000000	00000	0000000	00000
24"	11 cfm @ 100 psi	Not Rated	120	1/4	NPT	Female	Chrome-Plated Zinc	Steel	OSHA Compliant 29 CFR 1910.242	0000000	00000	0000000	00000
36"	11 cfm @ 100 psi	Not Rated	120	1/4	NPT	Female	Chrome-Plated Zinc	Steel	OSHA Compliant 29 CFR 1910.242	0000000	00000	0000000	00000

Extended-Reach Blowguns with Nonmarring Tip

With Angled Nozzle

These blowguns include a rubber tip that won't damage your workpiece. The extra length lets you access hard-to-reach areas.

Blowguns with angled nozzle can direct air over and around obstacles. They must be used with the included brass nozzle tip to meet OSHA 29 CFR 1910.242 and conform to requirements for maximum air outlet pressure.

					Air Inlet						OSHA Nozzle Tip
Nozzle Lg.	Air Consumption	Volume	Airflow Control	Max. Inlet Pressure, psi	Pipe Size	Thread Type	Gender	Body Material	Number of Nozzle Tips Included	Nonmarring Nozzle Tip Material	Material	Specifications Met		Each
With Angled Nozzle
24"	11 cfm @ 100 psi	Not Rated	Lever	120	1/4	NPT	Female	Zinc	2	Rubber	Brass	OSHA Compliant 29 CFR 1910.242	0000000	000000
48"	11 cfm @ 100 psi	Not Rated	Lever	120	1/4	NPT	Female	Zinc	2	Rubber	Brass	OSHA Compliant 29 CFR 1910.242	0000000	00000

Adjustable-Length Blowguns

Straight

Increase your reach with the telescoping nozzle. These blowguns conform to OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure.

				Air Inlet
Nozzle Lg.	Air Consumption	Volume	Max. Inlet Pressure, psi	Pipe Size	Thread Type	Gender	Body Material	Nozzle Tip Material	Specifications Met		Each
Straight
12"-32"	11 cfm @ 100 psi	Not Rated	120	1/4	NPT	Female	Chrome-Plated Zinc	ABS Plastic	OSHA Compliant 29 CFR 1910.242	0000000	000000

High-Airflow Blowguns

These blowguns provide more than two times the airflow of standard guns. They conform to OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure.

Pistol blowguns with a 2” long nozzle can be used with 1/8" threaded nozzles when you attach a nozzle adapter (sold separately).

Straight with 2 1/2" Lg. Nozzle

Straight with 4 1/2" Lg. Nozzle

Pistol

Blowguns
				Air Inlet								Repl. Nozzle Tips
Nozzle Lg.	Air Consumption	Volume	Max. Inlet Pressure, psi	Pipe Size	Thread Type	Gender	Body Material	Nozzle Tip Material	Specifications Met		Each		Each
Straight
2 1/2"	23.6 cfm @ 100 psi	Not Rated	150	1/4	NPT	Female	Zinc	Aluminum	OSHA Compliant 29 CFR 1910.242	0000000	000000	000000	00
4 1/2"	34 cfm @ 95 psi	Not Rated	150	1/4	NPT	Female	Chrome-Plated Zinc	Aluminum	OSHA Compliant 29 CFR 1910.242	0000000	00000	000000	00
Pistol
2"	25 cfm @ 100 psi	Not Rated	150	1/4	NPT	Female	Chrome-Plated Aluminum	Brass	OSHA Compliant 29 CFR 1910.242	000000	00000	0000000	000000

Nozzle Adapters for 2" Pistol Guns

0000000

Each

00000

Wide-Airflow Blowguns

The flat nozzle distributes air over a wider area than focused-airflow blowguns. All of these blowguns conform to OSHA 29 CFR 1910.242 requirements for maximum air outlet pressure.

				Air Inlet
Nozzle Lg.	Air Consumption	Volume	Max. Inlet Pressure, psi	Pipe Size	Thread Type	Gender	Body Material	Nozzle Tip Material	Specifications Met		Each
Pistol
3 1/2"	25 cfm @ 100 psi	85 dBA	145	1/4	NPT	Female	Plastic	Zinc	OSHA Compliant 29 CFR 1910.242	0000000	0000000

Blow-and-Spray Blowguns

With Straight Nozzle

With Angled Nozzle

Also known as a siphon gun, this blowgun sprays air and liquids at the same time. Push the lever and the airflow creates suction that draws water, cleaning solution, or other liquids through the hose.

Note: Do not use with flammable liquids.

				Air Inlet								Hose
Nozzle Lg.	Air Consumption	Volume	Max. Inlet Pressure, psi	Pipe Size	Thread Type	Gender	Maximum Flow Rate	Liquid Inlet Gender	For Liquid Inlet Hose ID	Body Material	Nozzle Tip Material	ID	Lg., ft.		Each
Straight with Straight Nozzle
4 1/2"	14 cfm @ 100 psi	Not Rated	150	1/4	NPT	Female	Not Rated	Male	1/4"	Zinc	Aluminum	1/4"	8	0000000	000000
Straight with Angled Nozzle
24"	11 cfm @ 100 psi	Not Rated	150	1/4	NPT	Female	Not Rated	Male	1/4"	Zinc	Aluminum	1/4"	1	0000000	00000
48"	11 cfm @ 100 psi	Not Rated	150	1/4	NPT	Female	Not Rated	Male	1/4"	Zinc	Aluminum	1/4"	15	0000000	00000

Clean-Air Blowguns

Clean surfaces without transferring dust or moisture from the air hose. This blowgun has a replaceable filter that traps particles such as rust and smoke and absorbs moisture. It conforms to OSHA Compliant 29 CFR 1910.242 requirements for maximum air outlet pressure. Volume (dBA) is measured 3 ft. from the blowgun at 100 psi.

Blowguns											Repl. Filters
Nozzle Lg.	Air Consumption	Volume, dBA	Removes Particle Size Down To, microns	Filter Moisture Capacity, oz.	Max. Inlet Pressure, psi	Body Material	Nozzle Tip Material	Specifications Met		Each		Each
Straight
3/4"	10 cfm @ 100 psi	87	0.01	1	100	Chrome-Plated Zinc	Brass	OSHA Compliant 29 CFR 1910.242	00000000	000000	00000000	000000

Compressed Air Flow Boosters

Fixed with Flange

Create a high-flow air stream from your compressed air supply. Flow boosters draw in ambient air, which amplifies compressed air flow. To maximize performance and service life, install a filter inline before the booster to remove particles down to the maximum particle size. Use hose clamps (not included) to connect hose or duct to the inlet or outlet.

Boosters with flange mount easily near your equipment.

	Input				Ambient Air Inlet		Outlet		Overall		Flange		Mounting Holes
Flow Input to Output Ratio	Flow Rate @ 90 psi	Pressure, psi	Output Flow Rate @ 90 psi	Max. Particle Size, µm	Connection Type	For Tube ID	Connection Type	For Tube ID	Lg.	Wd.	Ht.	Lg.	No. of	Dia.	Mounting Fasteners Included		Each
Fixed with Flange
1/8 NPT Female Supply Inlet
1:10	6.5 cfm	5-150	42 cfm	20	Clamp On	0.98"	Clamp On	0.73"	2 3/16"	2 5/16"	1.3"	2.3"	2	0.2"	No	000000	0000000
1/4 NPT Female Supply Inlet
1:15	11 cfm	5-150	155 cfm	20	Clamp On	1.5"	Clamp On	1.22"	2 3/4"	3"	1.9"	3"	2	0.27"	No	0000000	000000
3/8 NPT Female Supply Inlet
1:16	21 cfm	5-150	325 cfm	20	Clamp On	2.95"	Clamp On	2"	3 3/4"	4 1/8"	3.2"	4.1"	2	0.27"	No	0000000	000000

Tire Inflator Gauges

Mate these gauges to a compressed air line to measure pressure while inflating tires. They are strong enough to stand up to constant use.

Indicator bar readouts slide out of the top of the gauge to display pressure readings.

Gauges that meet OSHA 29 CFR 1910.177 are designed to safely fill sidewall truck tires. They have a hose long enough to inflate the tires from a safe distance.

Gauges with a rubber sleeve prevent metal-to-metal contact with your tire to avoid damaging it.Gauges with a clip-on Schrader connection don't require you to hold them while you’re filling up your tire.

Indicator Bar Readout

With Two Angled Heads

With One Straight Head

		Pressure Range				Hose		Air Inlet		Air Outlet
Head Type	Number of Heads	psi	kg/cm²	Numeric Increments, psi	Indicator Bar Material	Lg.	Material	Pipe Size	Thread Type	Thread Size	Thread Type	Schrader Valve Connection Type	Features		Each
Zinc-Plated Zinc
Angled	2	10-120	1-5	2	Brass	12"	Rubber	1/4	NPT	0.305"-32	Schrader	Press-and-Hold	Rubber Sleeve	00000000	000000
Straight	1	10-90	1-5	2	Brass	12"	Rubber	1/4	NPT	0.305"-32	Schrader	Press-and-Hold	Rubber Sleeve	00000000	00000

Digital Readout

With One Straight Head

		Pressure Range			Hose		Air Inlet		Air Outlet
Head Type	Number of Heads	psi	kPa	Numeric Increments, psi	Lg.	Material	Pipe Size	Thread Type	Thread Size	Thread Type	Schrader Valve Connection Type	Specifications Met		Each
Chrome-Plated Zinc
Straight	1	0-150	0-1,030	0.1	5ft.	Rubber	1/4	NPT	0.305"-32	Schrader	Clip On	OSHA Compliant 29 CFR 1910.177	00000000	0000000
Straight	1	0-150	0-1,030	0.1	10ft.	Rubber	1/4	NPT	0.305"-32	Schrader	Clip On	OSHA Compliant 29 CFR 1910.177	00000000	000000
Straight	1	0-150	0-1,030	0.1	15ft.	Rubber	1/4	NPT	0.305"-32	Schrader	Clip On	OSHA Compliant 29 CFR 1910.177	00000000	000000