Light Duty Air-Powered Impact Wrenches
These tools are suitable for general shop, maintenance, and automotive work. Wrenches operate at full torque in both clockwise and counterclockwise direction. Use with impact sockets only. Air-powered tools require lubrication to operate properly.
Ring-style socket retainer allows quick socket changes—pull the socket off the retainer and push on another one.
Ring-and-hole style socket retainer (also called positive locking) provides a more secure hold than ring-style retainers and requires a retaining ring.
Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Torque, ft.-lbs. | No. of Speeds | Max. No-Load Speed, rpm | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Overall Lg. | Weight, lbs. | Socket Retainer Style | Includes | Each | ||
1/4" Square Drive | ||||||||||||||
A | 55 | 1 | 14,500 | Not Rated | 1/4 | NPT | Female | 3/8" | 6 7/8" | 1 1/2 | Ring | 1/4" Square Drive Size Sockets (Inch): 3/16", 1/4", 3/8", 1/2", 9/16" 1/4" Square Drive Size Sockets (Metric): 4 mm, 6 mm, 10 mm, 12 mm, 14 mm | 0000000 | 0000000 |
3/8" Square Drive | ||||||||||||||
B | 90 | 4 | 9,500 | 3.2 cfm @ 90 psi | 1/4 | NPT | Male | 3/8" | 6 3/8" | 2.1 | Ring | __ | 0000000 | 000000 |
C | 180 | 1 | 10,000 | 2.5 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 6" | 2.9 | Ring | __ | 0000000 | 000000 |
D | 332 | 3 | 11,500 | 32 cfm @ 90 psi | 1/4 | NPT | Male | 3/8" | 7" | 2.6 | Ring | __ | 0000000 | 000000 |
1/2" Square Drive | ||||||||||||||
C | 600 | 1 | 8,000 | 4.2 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 7 3/8" | 5.8 | Ring | __ | 0000000 | 000000 |
D | 425 | 4 | 8,400 | 15 cfm @ 90 psi | 1/4 | NPT | Male | 3/8" | 7 1/2" | 5.1 | Ring | __ | 00000000 | 000000 |
3/4" Square Drive | ||||||||||||||
C | 1,050 | 1 | 6,000 | 8 cfm @ 90 psi | 3/8 | NPT | Female | 3/8" | 8 5/8" | 8.8 | Ring | __ | 00000000 | 000000 |
1" Square Drive | ||||||||||||||
E | 1,450 | 1 | 5,000 | 10 cfm @ 90 psi | 1/2 | NPT | Female | 1/2" | 10 1/2" | 22 | Ring and Hole | __ | 0000000 | 000000 |
Heavy Duty Air-Powered Impact Wrenches
A | B | C |
Pin-Style Socket Retainer | Hole-Style Socket Retainer |
Built for durability, these high-performance tools handle the demands of high-volume production and tough maintenance applications. They have a positive-locking socket retainer that provides a secure hold. Wrenches operate at full torque in both clockwise and counterclockwise direction. Use with impact sockets only. Air-powered tools require lubrication to operate properly.
Pin-style socket retainer has a pin that fits into a matching hole in the socket.
Hole-style socket retainer requires a retaining ring (included).
Air Inlet | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Torque, ft.-lbs. | No. of Speeds | Max. No-Load Speed, rpm | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Overall Lg. | Weight, lbs. | Socket Retainer Style | Retaining Ring Required | Features | Each | ||
1/2" Square Drive | |||||||||||||||
A | 500 | 1 | 5,000 | 3.8 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 6 7/8" | 6 | Pin | No | Built-In Lubrication System | 0000000 | 000000000 |
3/4" Square Drive | |||||||||||||||
A | 1,600 | 1 | 5,200 | 15 cfm @ 90 psi | 3/8 | NPT | Female | 1/2" | 8 7/8" | 11.9 | Hole | Yes | __ | 0000000 | 00000000 |
1" Square Drive | |||||||||||||||
A | 1,450 | 1 | 5,200 | 6 cfm @ 90 psi | 1/2 | NPT | Female | 1/2" | 8 7/8" | 11.4 | Hole | Yes | __ | 0000000 | 00000000 |
B | 2,000 | 1 | 5,000 | 10 cfm @ 90 psi | 1/2 | NPT | Female | 3/4" | 12 1/4" | 22 | Hole | Yes | Adjustable Side Handle Built-In Lubrication System | 0000000 | 00000000 |
1 1/2" Square Drive | |||||||||||||||
C | 3,600 | 1 | 3,500 | 15 cfm @ 90 psi | 1/2 | NPT | Female | 3/4" | 16 1/2" | 34 1/2 | Hole | Yes | Adjustable Side Handle | 00000000 | 00000000 |
Standard Duty Air-Powered Impact Wrenches
Use these wrenches for medium-volume production, general maintenance, and construction applications. Wrenches operate at full torque in both clockwise and counterclockwise direction. Use with impact sockets only. Air-powered tools require lubrication to operate properly.
Ring-style socket retainer allows quick socket changes—pull the socket off the retainer and push on another one.
Pin-, and hole-style socket retainers (also called positive locking) provide a more secure hold than ring-style retainers. Pin-style retainer has a pin that fits into a matching hole in the socket. Hole-style retainer requires a retaining ring.
Wrenches | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Air Inlet | Replacement Socket Retainer Kits | ||||||||||||||
Max. Torque, ft.-lbs. | No. of Speeds | Max. No-Load Speed, rpm | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Overall Lg. | Weight, lbs. | Socket Retainer Style | Each | Each | |||
3/8" Square Drive | |||||||||||||||
A | 250 | 1 | 15,000 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 6" | 2 1/2 | Ring | 0000000 | 0000000 | 0000000 | 00000 |
1/2" Square Drive | |||||||||||||||
B | 400 | 1 | 8,500 | 5.4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 6 3/4" | 5.6 | Pin | 0000000 | 000000 | 0000000 | 00000 |
C | 1,500 | 1 | 7,500 | 9 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 7 3/8" | 4.4 | Ring | 00000000 | 000000 | 00000000 | 0000 |
3/4" Square Drive | |||||||||||||||
A | 2,000 | 1 | 5,500 | 36 cfm @ 90 psi | 3/8 | NPT | Female | 1/2" | 8 1/2" | 7.8 | Hole | 0000000 | 000000 | 0000000 | 00000 |
1" Square Drive | |||||||||||||||
D | 2,000 | Variable | 5,000 | 6.2 cfm @ 90 psi | 1/2 | NPT | Female | 3/4" | 19.2" | 17.86 | Ring | 00000000 | 00000000 | 000000 | 00 |
Standard Duty Air-Powered Ratchet Wrenches
Use these tools for general shop applications. They have a ball-detent-style socket retainer that allows quick socket changes—pull the socket off the retainer and push on another one. Wrenches operate at full torque in both clockwise and counterclockwise direction. Air-powered tools require lubrication to operate properly.
Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Torque, ft.-lbs. | For Socket Drive Type | No. of Speeds | Max. No-Load Speed, rpm | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Overall Lg. | Weight, lbs. | Each | ||
1/4" Square Drive | |||||||||||||
A | 25 | Impact, Nonimpact Power | 1 | 250 | 3 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 7 3/8" | 1.4 | 0000000 | 0000000 |
A | 30 | Impact, Nonimpact Power | 1 | 330 | 2.8 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 7 3/8" | 1.4 | 0000000 | 000000 |
3/8" Square Drive | |||||||||||||
A | 54 | Impact, Nonimpact Power | 1 | 160 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 10 3/4" | 2.8 | 0000000 | 000000 |
B | 30 | Impact, Nonimpact Power | 1 | 330 | 2.8 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 7 3/8" | 1.4 | 0000000 | 000000 |
C | 76 | Impact, Nonimpact Power | 1 | 220 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 12" | 3.3 | 0000000 | 000000 |
D | 90 | Impact | 1 | 190 | 5 cfm @ 90 psi | 1/4 | NPT | Male | 3/8" | 12" | 2.7 | 0000000 | 000000 |
1/2" Square Drive | |||||||||||||
A | 54 | Impact, Nonimpact Power | 1 | 160 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 10 7/8" | 2.8 | 0000000 | 000000 |
D | 110 | Impact, Nonimpact Power | 1 | 180 | 3.25 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 10 1/4" | 2.8 | 0000000 | 000000 |
Heavy Duty Air-Powered Ratchet Wrenches
Built for durability, these wrenches handle the demands of high-volume production and tough maintenance applications. They have a ball-detent-style socket retainer that allows quick socket changes—pull the socket off the retainer and push on another one. Wrenches operate at full torque in both clockwise and counterclockwise direction. Air-powered tools require lubrication to operate properly.
Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Torque, ft.-lbs. | For Socket Drive Type | No. of Speeds | Max. No-Load Speed, rpm | Speed Control | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Overall Lg. | Weight, lbs. | Each | |
1/4" Square Drive | |||||||||||||
40 | Impact | Variable | 270 | Lever | 2.8 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 8 1/8" | 1.46 | 0000000 | 0000000 |
3/8" Square Drive | |||||||||||||
40 | Impact | Variable | 270 | Lever | 2.8 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 8 1/8" | 1.46 | 0000000 | 000000 |
80 | Impact | 1 | 280 | Push Button | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 10 7/8" | 2.73 | 0000000 | 000000 |
Torque-Limiting Air-Powered Wrenches
Set torque and the wrench will prevent you from exceeding it. Also known as nutrunners, these tools are commonly used in assembly applications. They have a pin-style (also called positive locking) socket retainer that fits into a matching hole in the socket and provides a secure hold. Wrenches operate at full torque in both clockwise and counterclockwise direction. Use with impact sockets only. Air-powered tools require lubrication to operate properly.
Air Inlet | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Torque, ft.-lbs. | Torque-Limiting Mechanism | No. of Speeds | Max. No-Load Speed, rpm | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Overall Lg. | Weight, lbs. | Each | |
1/4" Square Drive | ||||||||||||
3.8 | Motor Stops | 1 | 700 | 13 cfm @ 90 psi | 1/8 | NPT | Female | 1/4" | 12 1/2" | 1.8 | 0000000 | 000000000 |
3/8" Square Drive | ||||||||||||
9.16 | Clutch Disengages | 1 | 600 | 16 cfm @ 90 psi | 1/4 | NPT | Female | 1/4" | 13 1/4" | 3.4 | 000000 | 00000000 |
Air-Powered Screwdrivers
Connect these tools to your shop air to install and remove fasteners.
Screwdrivers with positive clutch drive are the best choice for fastening applications where torque control is not critical. These tools require the operator to pull the trigger and apply pressure to the screw before the bit will turn. The clutch slips as soon as pressure is lifted or the maximum torque of the tool is reached.
Screwdrivers with direct drive start turning the bit as soon as the operator pulls the trigger. These tools provide a high level of control over fastening but do not have any built-in mechanism for preventing overtightening or limiting torque. Since pressure is not required for the screwdriver to turn the bit, they're good for fastening through compressible materials.
Note: Air tools require lubrication to operate properly.
Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Speeds | Max. No-Load Speed, rpm | Max. Torque, in.-lbs. | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Power Source | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Positive Clutch Drive | ||||||||||||||
Variable | 1,800 | 115 | 1/4" | 7 3/4" | 2.9 | Air | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 00000000 | 0000000 |
Direct Drive | ||||||||||||||
Variable | 1,800 | 125 | 1/4" | 7" | 2.3 | Air | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 00000000 | 000000 |
1 | 2,200 | 64.8 | 1/4" | 6 1/4" | 2.3 | Air | 90 | 2.5 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 000000 |
Air-Powered Torque Screwdrivers
Set torque and the clutch slips when it’s reached, causing the tool to stop turning the fastener. To set torque, turn the adjustment collar or screw and then verify the torque setting with a torque tester.
Note: Air tools require lubrication to operate properly.
Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Speeds | Max. No-Load Speed, rpm | Torque Range, in.-lbs. | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Clutch Slips Torque Limiter | |||||||||||||
Trigger Speed Control | |||||||||||||
Variable | 800 | 55-100 | 1/4" | 9" | 3 | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 0000000 |
Variable | 900 | 13-70 | 1/4" | 9 1/2" | 2.9 | 90 | 17 cfm @ 90 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 000000 |
Push-to-Start Speed Control | |||||||||||||
1 | 1,000 | 1.5-30 | 1/4" | 8 3/4" | 1.1 | 90 | 13 cfm @ 90 psi | 1/8 | NPT | Female | 1/4" | 0000000 | 000000 |
Lever Speed Control | |||||||||||||
Variable | 1,000 | 1.5-30 | 1/4" | 9 1/4" | 1.1 | 90 | 13 cfm @ 90 psi | 1/8 | NPT | Female | 1/4" | 0000000 | 000000 |
Variable | 1,800 | 45-70 | 1/4" | 9 1/2" | 1.5 | 90 | 4 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 000000 |
Variable | 2,100 | 13-40 | 1/4" | 10" | 2.6 | 90 | 16 cfm @ 90 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 000000 |
High-Precision Air-Powered Torque Screwdrivers
The motor shuts off when the set torque is reached to provide the most torque control of any air-powered screwdriver. To set torque, turn the adjustment collar or screw and then verify the torque setting with a torque tester.
Note: Air tools require lubrication to operate properly.
Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. No-Load Speed, rpm | Torque Range, in.-lbs. | Number of Speeds | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Motor Stops Torque Limiter | |||||||||||||
Push-to-Start Speed Control | |||||||||||||
800 | 14.1-35.2 | 1 | 1/4" | 8 1/4" | 1.4 | 85 | 10.5 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 000000000 |
1,000 | 3.1-9.7 | 1 | 1/4" | 7 1/8" | 0.7 | 85 | 5.6 cfm @ 85 psi | 1/8 | NPT | Female | 1/4" | 0000000 | 00000000 |
1,100 | 3.5-18.5 | 1 | 1/4" | 7 1/4" | 0.9 | 85 | 7 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 00000000 |
Lever Speed Control | |||||||||||||
1,100 | 3.5-17.4 | 1 | 1/4" | 8 1/4" | 1.2 | 85 | 7 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 00000000 |
1,100 | 9.7-18.5 | 1 | 1/4" | 10 3/4" | 1.5 | 85 | 7 cfm @ 85 psi | 1/4 | NPT | Female | 1/4" | 0000000 | 00000000 |
Air-Powered Impact Screwdrivers
Connect these tools to your shop air. They deliver powerful rotational blows to maximize torque and drive screws quickly, even through thick or dense material.
Note: Air tools require lubrication to operate properly.
Air Inlet | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number of Speeds | Max. No-Load Speed | Torque Range, in.-lbs. | Drive Direction | For Bit Hex Shank Size | Overall Lg. | Weight, lbs. | Recommended Operating Air Pressure | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Each | |
Pistol Grip | ||||||||||||||
in.-lbs. | ||||||||||||||
Variable | 10,000 rpm | 120-840 | Clockwise and Counterclockwise | 1/4" | 6 5/16" | 2.1 | 90 psi | 2 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 0000000 | 0000000 |
Air-Powered Winches for Wire Rope—For Lifting
Because this winch runs on compressed air, it gives you a longer operating time than electric winches. It has an automatic brake that holds the load when the motor stops. To lift, mount winch above the load, or use winch with a pulley that’s mounted above the load. Enclosed gears offer protection from dirt and debris.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Warning: Never use to lift people or items over people.
Inlet | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Cap., lbs. | Fully Wound Cap., lbs. | Min. Line Speed, fpm | For Max. Rope Lg., ft. | For Rope Dia. | O'all Wd. | O'all Lg. | O'all Ht. | Material | Rope with Hook Included | Air Hose Included | Air Consumption @ Pressure | Gender | Thread Type | Pipe Size | Features | Each | |
15 Minutes On, 45 Minutes Off | |||||||||||||||||
2,000 | 1,200 | 13 | 90 | 5/16" | 8 7/8" | 14 3/8" | 15" | Aluminum, Steel | No | No | 80 cfm @ 100 psi | Female | NPT | 1/2 | Reversible Pulling Directions | 00000000 | 000000000 |
Heavy Duty Air-Powered Winches for Wire Rope—For Lifting
These winches operate longer and require shorter breaks than standard air-powered winches. Because they run on compressed air, they give you longer operating times than electric winches. They have an automatic brake that holds the load when the motor stops. To lift, mount winches above the load, or use winches with a pulley that’s mounted above the load. Enclosed gears offer protection from dirt and debris.
For wire rope, see Wire Rope with Hook for Winches.
Note: Capacity is highest for the first layer of rope (at least five wraps of rope on the winch) and decreases as each additional layer of rope is wound on the winch.
Warning: Never use to lift people or items over people.
Inlet | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Cap., lbs. | Fully Wound Cap., lbs. | Min. Line Speed, fpm | For Max. Rope Lg., ft. | For Rope Dia. | O'all Wd. | O'all Lg. | O'all Ht. | Material | Rope with Hook Included | Air Hose Included | Air Consumption @ Pressure | Gender | Thread Type | Pipe Size | Features | Each | |
30 Minutes On, 10 Minutes Off | |||||||||||||||||
1,500 | 1,000 | 40 | 170 | 1/4" | 17 1/2" | 21 1/2" | 12 1/2" | Aluminum, Steel | No | No | 100 cfm @ 90 psi | Female | NPT | 1/2 | Reversible Pulling Directions | 0000000 | 000000000 |
Air-Powered Wire Rope Hoists
These hoists are quieter and more stable than air-powered chain hoists. Change or hold the speed at any time during operation, so you can start the hoist softly and gradually decelerate. Hoists have a cool-running motor for continuous operation. The brake stops the load and holds it in place when you're not lifting. The gears are enclosed to protect them from debris and contamination for smooth operation.
Warning: Never use to lift people or items over people.
Capacity | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
tons | lbs. | Lift Lg., ft. | Lifting Speed, fpm | Clearance | Hook Opening Wd. | Inlet Thread Type | Inlet Pipe Size | Air Consumption @ Pressure | Duty Cycle | Wire Rope Dia. | Each | |
Cast Iron with Enclosed Gears | ||||||||||||
1/8 | 300 | 7 | 36 | 23" | 7/8" | NPT | 3/8 | 21.2 cfm @ 90 psi | Continuous Use | 5/32" | 0000000 | 000000000 |
Air-Powered Chain Hoists
Hoists have a cool-running motor for continuous operation. The brake stops the load and holds it in place when you're not lifting.
Hoists with overload protection will not operate when the load exceeds capacity.
Cast iron hoists have a durable housing for longer life than aluminum hoists.
A filter-regulator-lubricator (not included) is required to lubricate the gears and clean and regulate the incoming air.
Warning: Never use to lift people or items over people.
Capacity | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
tons | lbs. | Lifting Speed, fpm | Clearance | Hook Opening Wd. | Inlet Thread Type | Inlet Pipe Size | Air Consumption @ Pressure | Duty Cycle | Specifications Met | 10-ft. Lift | 15-ft. Lift | 20-ft. Lift | |
Aluminum with Chain Container | |||||||||||||
CM Budgit 2200 with Lever Control | |||||||||||||
1/4 | 500 | 65 | 16" | 1 1/8" | NPT | 3/8 | 48 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 000000 | |||
1/2 | 1,000 | 45 | 16" | 1 1/8" | NPT | 3/8 | 48 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 000000 | |||
1 | 2,000 | 23 | 18" | 1 1/4" | NPT | 3/8 | 48 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 000000 | |||
CM Budgit 2200 with Pull Control | |||||||||||||
1/4 | 500 | 65 | 16" | 1 1/8" | NPT | 3/8 | 48 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 000000 | |||
1/2 | 1,000 | 45 | 16" | 1 1/8" | NPT | 3/8 | 48 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 000000 | |||
CM Budgit 6000 with Lever Control | |||||||||||||
2 | 4,000 | 15 | 22" | 1 3/8" | NPT | 3/4 | 80 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 000000 | |||
Cast Iron with Chain Container and Overload Protection | |||||||||||||
Harrington TCR with Lever Control | |||||||||||||
1/4 | 500 | 68 | 19" | 1 1/8" | NPT | 1/2 | 63 cfm @ 90 psi | Continuous Use | ASME B30.10, ASME B30.16, ASME HST-5 | 0000000 | |||
1/2 | 1,000 | 68 | 19" | 1 1/8" | NPT | 1/2 | 63 cfm @ 90 psi | Continuous Use | ASME B30.10, ASME B30.16, ASME HST-5 | 0000000 | |||
1 | 2,000 | 37 | 19" | 1 1/8" | NPT | 1/2 | 62 cfm @ 90 psi | Continuous Use | ASME B30.10, ASME B30.16, ASME HST-5 | 0000000 | |||
2 | 4,000 | 19 | 22" | 1 1/8" | NPT | 1/2 | 62 cfm @ 90 psi | Continuous Use | ASME B30.10, ASME B30.16, ASME HST-5 | 0000000 | |||
Harrington TCR with Pull Control | |||||||||||||
1/4 | 500 | 68 | 19" | 1 1/8" | NPT | 1/2 | 63 cfm @ 90 psi | Continuous Use | ASME B30.10, ASME B30.16, ASME HST-5 | 0000000 | |||
1/2 | 1,000 | 68 | 19" | 1 1/8" | NPT | 1/2 | 63 cfm @ 90 psi | Continuous Use | ASME B30.10, ASME B30.16, ASME HST-5 | 0000000 | |||
1 | 2,000 | 37 | 19" | 1 1/8" | NPT | 1/2 | 62 cfm @ 90 psi | Continuous Use | ASME B30.10, ASME B30.16, ASME HST-5 | 0000000 | |||
2 | 4,000 | 19 | 22" | 1 1/8" | NPT | 1/2 | 62 cfm @ 90 psi | Continuous Use | ASME B30.10, ASME B30.16, ASME HST-5 | 0000000 |
Variable-Speed Precise-Positioning Compact Air-Powered Chain Hoists
Change or hold the speed at any time during operation so you can start the hoist softly and gradually decelerate. They are small and lightweight so you can easily move them between jobs. Hoists have a cool-running motor for continuous operation. The brake stops the load and holds it in place when you're not lifting, and overload protection prevents hoists from operating if the load exceeds capacity.
A filter-regulator-lubricator (not included) is required to lubricate the gears and clean and regulate the incoming air.
Warning: Never use to lift people or items over people.
Capacity | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
tons | lbs. | Lifting Speed, fpm | Clearance | Hook Opening Wd. | Inlet Thread Type | Inlet Pipe Size | Air Consumption @ Pressure | Duty Cycle | Specifications Met | 10-ft. Lift | 15-ft. Lift | 20-ft. Lift | |
Aluminum with Chain Container and Overload Protection | |||||||||||||
CM ShopAir | |||||||||||||
0.15 | 300 | 31 | 11" | 1" | NPT | 3/8 | 34 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 0000000 | |||
1/4 | 500 | 21 | 11" | 1" | NPT | 3/8 | 34 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 0000000 | |||
0.3 | 600 | 16 | 12" | 1" | NPT | 3/8 | 34 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 0000000 | |||
1/2 | 1,000 | 11 | 12" | 1" | NPT | 3/8 | 34 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 0000000 |
For Inlet Thread Type | For Inlet Pipe Size | Each | |
NPT | 3/8 | 0000000 | 0000000 |
For Inlet Thread Type | For Inlet Pipe Size | Each | |
NPT | 3/8 | 0000000 | 000000 |
Spark-Resistant Air-Powered Chain Hoists
These hoists have an aluminum body, stainless steel chain, and bronze hooks for spark resistance. They have a cool-running motor for continuous operation. The brake stops the load and holds it in place when you're not lifting.
Hoists with overload protection will not operate when the load exceeds capacity.
A filter-regulator-lubricator (not included) is required to lubricate the gears and clean and regulate the incoming air.
Warning: Never use to lift people or items over people.
Capacity | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
tons | lbs. | Lifting Speed, fpm | Clearance | Hook Opening Wd. | Inlet Thread Type | Inlet Pipe Size | Air Consumption @ Pressure | Duty Cycle | Specifications Met | 10-ft. Lift | 15-ft. Lift | 20-ft. Lift | |
Aluminum | |||||||||||||
CM Budgit 2200 with Pull Lever | |||||||||||||
3/8 | 750 | 60 | 16" | 1 1/8" | NPT | 3/8 | 48 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 0000000 | |||
Aluminum with Overload Protection | |||||||||||||
CM Budgit 6000 with Lever | |||||||||||||
1/2 | 1,000 | 16 | 17" | 1 1/4" | NPT | 3/4 | 80 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 0000000 | |||
1 | 2,000 | 8 | 22" | 1 1/4" | NPT | 3/4 | 80 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 0000000 |
Air-Powered Tap Wrenches
Powered by compressed air, these tap wrenches thread holes faster and with less effort than manual tap wrenches. They’re often used in place of manual tap wrenches when threading many holes and hard materials. Compared to drill presses and CNC machines, which are stationary, these wrenches are portable so you can take them to the part that needs to be threaded. To remove chips from your hole, press the reverse button to rotate the tap counterclockwise. Switch different taps in and out of the chuck when your tap is worn down or you need a new size. Use with machine tool taps and tapping lubricants for best results.
Air Inlet | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Tap Size | For Square Shank Size | Max. Torque, in.-lbs. | No. of Speeds | Max. No-Load Speed, rpm | Recommended Operating Air Pressure, psi | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Exhaust Location | Lg. | Wt., lbs. | Each | |
No. 10, No. 12, 1/4", 5/16", M5, M6, M7, M8 | 0.191"-0.313" | 400 | 1 | 300 | 90 | 30 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | Handle | 7 1/4" | 2.9 | 0000000 | 000000000 |
1/4", 5/16", 3/8", 7/16", 1/2", M6, M7, M8, M9, M10, M11, M12, M13 | 0.25"-0.5" | 400 | 1 | 300 | 90 | 30 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | Handle | 7 1/4" | 2.9 | 0000000 | 00000000 |