Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Designed for installation directly to your air-powered tool, these regulators maintain the set air pressure.

Use these regulators to adjust and maintain the pressure of your tubing air lines.

An internal check valve permits reverse flow, so these regulators work with double-acting cylinders.

A 316 stainless steel housing allows these regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

View and control output pressure remotely and at the source.

Designed for control applications that require high reliability and repeatability, these regulators translate electrical signals to output pressure.

Mount these regulators to a 35 mm DIN rail or a wall with one of the two included brackets.

A pressure-calibrated dial allows for easy adjustments to outlet pressure in high-flow applications.

Fit these regulators in tight spaces to adjust and maintain air pressure in sensitive applications where constant, consistent pressure is important.

Run up to four air-powered tools from a single air supply.

Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.

Mount these filter/regulators to a 35 mm DIN rail with the included brackets.

A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Festo filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A filter, regulator, and lubricator with push-to-connect fittings are combined to provide clean, lubricated compressed air at your required pressure. Fittings make a tight seal around tubing.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Replace the filter element in your Norgren modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

These valves automatically reduce a high, variable inlet pressure to a lower, stable outlet pressure.

To maintain contaminant-free standards in clean room environments, these valves come cleaned and bagged to Fed. Std. Class 100 and ISO Class 5 clean room standards and have a 316 stainless steel body with a smooth finish to resist dust collection.

Often used in wet conditions and harsh environments, these valves have a 316 stainless steel body for excellent corrosion resistance.

Withstand more than six times the inlet pressure of standard pressure-regulating valves.

Often used on dispensers, humidifiers, and fountains, these valves have a 316 stainless steel body that can stand up to deionized water and corrosive conditions.

Often used for oxygen service and other high-purity applications, these valves are cleaned and bagged to meet CGA G-4.1 standards to prevent contamination.

For extremely high-pressure applications in tight spots, these valves handle the same inlet pressures as other ultra-high-pressure-regulating valves within a smaller footprint.

Excellent performance at low pressures.

Withstand inlet pressures up to 3,500 psi.

Valves have a brass body.

For easy panel mounting in your water system, these valves have threads below the adjustment knob and come with a panel-mount nut.

Maintain contaminant-free standards in clean room environments. These valves come cleaned and bagged to Fed. Spec. Class 100 and ISO Class 5 clean room standards and have a 316 stainless steel body with a smooth finish to resist dust collection.

For a longer service life than standard valves for cryogenic liquids, these have a durable bronze body. They’re for use with liquid argon, liquid carbon dioxide, liquid nitrogen, and liquid oxygen.

Regulate air, gas, and liquid pressure on food, beverage, and pharmaceutical lines with these valves—they’re 3-A certified to meet sanitary design standards.

Body is cast iron.

A 316 stainless steel body provides exceptional corrosion resistance in wet conditions and harsh environments.

These valves meet NSF/ANSI 61 for use in drinking water systems.

Compression fittings bite down on hard metal and plastic tubing for a tighter seal than push-to-connect fittings.

Regulate vacuum levels from your instrument panel with these valves that have threads below the adjustment handle and a panel-mount nut.

For a longer service life than brass vacuum-regulating valves, these are made of bronze for strength and durability.