We will reply to your message within an hour.
More
Purify the air in spaces with light cleaning needs.
Save floor space—cleaners mount in a T-bar style ceiling.
Carry these small cleaners to job sites to remove odors and dust from the air.
Filtering away dust and particles, these hoods create a clean space for demanding work, such as bioprocessing, pharmaceuticals, electronics, and optics.
Larger than portable air cleaners, these air cleaners roll to where you need them.
Roll the air cleaner to the contaminant source or place it on your bench top.
Purify the air in your most sensitive environments. These filters remove 99.999% of dust and other particles, so they're best in areas where high air purity matters, such as semiconductor, pharmaceutical, and aerospace facilities.
Multiple panels maximize filtering surface area for long service life.
The rigid frame on these filters withstands fluctuations in airflow, such as those created by variable air volume systems.
Control dust and contaminants in hospitals, laboratories, and other demanding environments. These filters capture particles down to 0.3 microns.
Carbon granules in these filters remove odors from the air. The rigid frame won’t bend or twist from sudden changes in airflow, such as those created by variable air volume systems.
Extend the time between filter changes in laboratories, hospitals, and other places with a high risk of airborne contaminants.
Wash and reuse these pads. Cut to the size you need.
Cut these washable, reusable rolls to the size you need.
Determine the right pores per inch for your air filtering application—you'll receive several small samples with different pores per inch.
Wrapped in aluminum mesh for added support, these filters can be used without a frame.
Cut these rolls to the size you need.
These pads are an economical choice for protecting more expensive filters that catch finer particles.
These rolls are an economical choice for protecting more expensive filters that catch finer particles.
Cut these pads to the size you need.
Carbon granules inside these filters remove odors from the air. Cut them to the size you need.
With a higher carbon concentration than odor-removal air filter rolls, these pads handle heavier odors.
Replace the filter roll in your automatic filtering equipment.
Designed for use with electronic equipment, these pads can withstand prolonged exposure to heat and humidity.
The deep pockets on these filters maximize filtering surface area with minimal airflow resistance.
Clear the air of fine particles and odors caused by high levels of pollution, such as wildfire smoke.
Eliminate heavy odors with these filters that have 30 times the odor removing ability of standard odor-removal air filters.
Carbon granules in these filters remove odors. They are pleated to maximize filtering surface area without reducing airflow.
Rated MERV 13, these filters capture particles down to 0.3 microns.
Rated MERV 11, these filters capture particles down to 1 micron.
With tight pleats, these filters have a larger surface area than filters with standard pleats for improved efficiency and an even longer life. These filters strike a good balance of filtering efficiently while allowing airflow, making them a more cost-effective option than higher rated filters.
An inherent electrostatic charge attracts dust and particles to these filters.
Create a custom-sized filter or protective layer for expensive filters.
Magnetic strips on the back of the frame make these filters easy to install and remove.
These filters are typically used as replacements in HVAC equipment.
A compound inhibits mildew and mold growth.
Select the dimensions you need for custom-sized frames.
The filter material extends beyond the frame for a tight fit, creating a seal to prevent air from bypassing the filter around its edges.
The pleats create a large surface area for filtering without reducing airflow.
Stop unfiltered air from passing between panels or around filter tracks.
Also known as metal mesh filters. These filters can be washed and reused.
A compound inhibits mildew, mold, and fungi growth.
These filters are built to withstand higher temperatures than other metal panel air filters.
Get an alert on your phone or tablet when it's time to change your air filter.
A thick-gauge metal frame makes these filters more durable than other reusable filters.
These washable, durable filters are made to your dimensions.
Prevent air from bypassing your filter. These filters are self-sealing thanks to the filter material that fully encloses the metal frame.
Draw particles and filament fumes away from open-frame 3D printers without cooling off printed parts.
Replace the filter element in your Festo modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your ARO modular compressed air filter to trap solid particles and water droplets.
Replace the filter element in your Wilkerson modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your Norgren modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your Parker modular compressed air filter to trap solid particles and water droplets.
Replace the filter element in your SMC modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your ASCO Numatics modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
These filter elements fit in ASCO Numatics modular two-stage compressed air filters to remove water droplets, oil, and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in Wilkerson modular compressed air filters to remove oil and fine particles.
Also known as coalescing filters, these filter elements fit in Festo modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in SMC modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in ASCO Numatics modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in Norgren modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in ARO modular compressed air filters to remove oil and particles as small as 0.3 microns.
Also known as coalescing filters, these filter elements fit in Parker modular compressed air filters to remove oil and particles as small as 0.01 microns.
Filter and lubricator in one, these filter/lubricators provide clean, lubricated compressed air to extend the service life of tools and equipment.
Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles.
An oil filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.
Use a single air supply to distribute air to up to four locations. In addition to the outlet for inline connection, these manifolds have three 1/4 NPT female outlets for connection to air-powered tools and equipment.
No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.
A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.
Mount these filter/regulators to a 35 mm DIN rail with the included brackets.
With ±0.2 psi accuracy, these filter/regulators provide more precise control than our other compressed air filter/regulators.
Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags.
A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.
These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.
A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.
No need for thread adapters—these filter/regulator/lubricators have an NPT inlet and a BSPP outlet.
A filter, regulator, and lubricator with push-to-connect fittings are combined to provide clean, lubricated compressed air at your required pressure. Fittings make a tight seal around tubing.
With one outlet port before the lubricator and one after, these filter/regulator/lubricators work in systems that require lubrication in some lines but not in others.
An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
An SMC filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Parker filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Festo filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.