Replace a damaged bowl, or change the bowl material or drain type on your Parker modular compressed air filter. Bowls come with an O-ring to ensure a tight seal. Check the manufacturer series on your filter to ensure compatibility.

Replace a damaged bowl, or change the bowl material or drain type on your Wilkerson modular compressed air filter. Bowls come with an O-ring to ensure a tight seal. Check the manufacturer series on your filter to ensure compatibility.

Replace a damaged bowl or change the bowl material or drain type on your ARO modular compressed air filter. These bowls come with an O-ring to ensure a tight seal. Check the manufacturer series on your filter to ensure compatibility.

Bowls with an automatic drain work well in air lines that have high water content, run continuously, or are hard to reach. Bowls with a manual drain are great for systems with steady, predictable condensate levels.

Aluminum bowls handle bumps and drops better than plastic bowls.

Clear bowls and opaque bowls with sight glass allow you to see inside to monitor their contents.

Replace a damaged bowl, or change the drain type on your Festo modular compressed air filter. Bowls come with an O-ring to ensure a tight seal. Check the manufacturer series on your filter to ensure compatibility.

An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure. Regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure. Filter and lubricator have a clear bowl or sight glass so you can monitor the contents inside.

Stacked filter/regulator/lubricators require less horizontal space than inline FRLs. The filter and regulator are joined top-to-bottom with the lubricator on the side.

Mounting brackets allow you to attach the filter/regulator/lubricator to a wall or equipment.

Joiner clamps (sold separately) connect the filter/regulator/lubricator to another ARO modular component with the same series number. They come with mounting brackets.

End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.