We will reply to your message within an hour.
More
Paint metal surfaces to stop rust from starting and prevent existing rust from spreading.
Use this low-VOC paint in enclosed spaces to stop rust from starting and prevent existing rust from spreading.
Touch up small scratches on metal surfaces with these pens.
Match the manufacturers' color of your forklift, lift truck, or pallet truck to cover scratches and wear.
This paint resists heat and automotive fluids for use on engines. Match the color to your manufacturers' equipment color.
Cover scratches and wear on heavy equipment, such as tractors, excavators, and bulldozers.
Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.
Match the manufacturers’ color of your lift, jack, or motor to cover scratches and wear. This paint resists oil, gas, heat, and sunlight for use in demanding environments.
Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.
Hide nicks and scratches on metal surfaces with this textured-finish paint. It stops rust from starting and prevents existing rust from spreading.
Enhance, renew, and protect surfaces.
This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.
Make items stand out under emergency lighting or in low-light environments.
Spray this paint on the back of glass or clear plastic to create a reflective silver effect on the other side.
Create a washable writing surface.
Mark traffic lanes, parking lots, and factory floors.
Highly abrasion resistant, use this paint in high-traffic areas. It’s good for marking traffic lanes, parking lots, and factory floors.
Unlike other marking paint, this paint sprays in the upright position and dries fast, so it won't drip when applied overhead.
This paint adheres to most types of plastic without sanding or priming.
Stain and seal in one application to protect and refresh the appearance of wood surfaces.
Spray this paint onto trees, logs, or cut wood—even in the rain—to create a bright mark that can be seen at a distance.
Touch-up nicks and scratches on wood.
This water-based paint sprays in an inverted position and will not harm grass or other plant life.
Marks made with this paint fade naturally in approximately 30 days. It is water based and will not harm grass or other plant life.
This paint lays on thicker than other turf marking paint, making cleaner, bolder lines. It is water based and will not harm grass or other plant life.
These zinc-rich coatings offer the protection of hot-dip galvanizing to keep iron and steel free of rust and corrosion.
Use these coatings on nonporous surfaces that need to withstand high-pressure washdowns. They contain 316 stainless steel flakes, which provide durability and superior corrosion and impact resistance.
Apply these coatings directly to rust to prevent it from spreading and to stop new rust from forming. Often used on containers, trailers, and in marine restoration, they create a durable, impact-resistant surface that permanently stops rust.
These polyurethane-based coatings resist moisture, corrosion, abrasion, and impact better than paint and have excellent color retention. They're often used as a topcoat over epoxy coatings.
Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals.
These two-part epoxy coatings resist chemicals and other solvents.
More durable and scratch resistant than liquid paint, use this dry paint with your powder coating system.
Make guardrails, poles, and other safety equipment stand out in low-light environments.
These flexible, slip-resistant silicone coatings resist chemicals, block UV light, and encapsulate lead paint. They withstand temperatures up to 320° F.
Tough and long-lasting, these flexible coatings protect against rust and corrosion.
Protect brass, bronze, copper, and silver from moisture, chemicals, oxidation, and abrasion.
Protect metal parts from corrosion. Also known as rust-inhibiting film, these coatings can be removed with a simple degreaser or mineral spirits.
These soft, pliable coatings add cushion and absorb shock. Use them to protect tools, dies, and other parts during shipping and storage. Once removed, coatings can be melted again for repeat use.
Protect tools, dies, and other parts during shipping and storage with these durable peel-away coatings. They resist abrasion, moisture, and corrosion. Once removed, coatings can be melted again for repeat use.
Also known as brushable ceramic, these coatings create a hard, low-friction surface. They're often used on liquid processing equipment to protect worn areas and reduce turbulence.
Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.
These coatings are some of the thickest and most durable on the market. They protect against abrasion and resist moisture and chemicals.
Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.
Some of the thickest and most durable on the market, these coatings have excellent abrasion and impact resistance. Often used as a topcoat over epoxy coatings, they provide superior UV resistance and have great color and gloss retention.
Apply these coatings in temperatures down to 20° F, when other coatings would fail. They handle high humidity and have superior abrasion, impact, and UV resistance while providing great color and gloss retention.
Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals.
Protect surfaces against chemical fumes and splashes. These coatings resist acids, alkalies, and inorganic salts. They’re highly durable and have excellent adhesion.
Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.
Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.
Designed for use in areas with heavy vehicular traffic, these coatings are highly resistant to wear. They contain grit to provide traction to your surface.
These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction.
Spray these coatings on glass to create a clear, scratch-resistant surface that repels oil and water. They’re also known as oleophobic and hydrophobic coatings.
Also known as coal tar epoxy, these coatings are our most resistant to abrasion, chemicals, and corrosion on concrete and steel. They can be immersed in salt water and fresh water.
These coatings provide chemical, corrosion, and impact resistance on grit-blasted concrete and primed steel in immersion, underground, and waste-water treatment applications.
Spray these thin coatings onto most types of metal, plastic, and glass for a washable coating that protects the underlying surface from scratches. They can be easily peeled off if removed within six months.
Put a temporary dull finish on glossy surfaces. Wipe to remove.
Apply these wear-resistant coatings to wood to protect from scuffs, water, and oil damage.
Repel spills and block stains without changing the look of fabric or upholstery.
Stop fabric from fading in the sun. These coatings also protect against spots, spills, and stains.
These silicone-based coatings renew leather and vinyl surfaces and protect against UV damage, dirt, and ozone.
Also known as neatsfoot oil, use these to recondition, waterproof, and preserve leather.
Also known as castor oil, use these to lubricate and preserve leather.
Designed for marine environments, these coatings stand up to harsh chemicals, such as sulfuric acid, citric acid, and diesel fuel. They have excellent abrasion, impact, and UV resistance, as well as low hardening temperatures.
Made from silicone, these coatings are more durable than acrylic coatings for roofs and have better resistance to pooling water. They reflect up to 90% of the sun's rays to reduce cooling costs.
Use these coatings to form a water-resistant layer to restore and reinforce your roof.
These coatings reflect up to 60% of the sun's rays. They also restore and reinforce your roof by forming a water-resistant seal.
Hold back standing water. These coatings soak into the top layer of masonry to create a thick, waterproof seal rated up to 15 psi.
These primers convert rust into a layer of protection that prevents new rust from forming. Use them to prepare your surface to extend the life of paint and coatings.
Get the power of a two-part epoxy primer in an easy-to-use aerosol can. These primers have excellent chemical and corrosion resistance. Spray them on uncoated or rusty metal to extend the life of paint and coatings.
Add long-term corrosion protection to uncoated or rusty metal surfaces. These primers prepare your surface to extend the life of paint and coatings.
These primers stand up to marine exposure and salt spray. Use them to prepare your surface to extend the life of paint and coatings.
Protect steel and iron parts from corrosion without having to remove the primer before welding them together. Often used on structural steel in demanding environments, these primers can be welded through without affecting the weld’s integrity.
A high concentration of zinc gives these primers excellent corrosion resistance for protecting steel—when exposed to moisture and chemicals, the zinc rusts before the underlying steel can. They’re often used with structural steel.
Use these primers on your surface before antislip coatings to maximize longevity.
Prepare metal surfaces for powder coating. These primers create a base layer that bonds with your top coat to extend the life of your powder coating.
Prepare metal, wood, and concrete for paint. Primers adhere to underlying surfaces to create a base layer that bonds well with paint for a long-lasting finish.
These primers fill surface cracks and are sandable for a smooth basecoat. Use them to prepare your surface to extend the life of paint and coatings.
Cover stains from smoke, water, and ink to prevent them from bleeding through your topcoat, extending the life of paint and coatings.
These primers have excellent adhesion to plastic. Use them to prepare your surface to extend the life of paint and coatings.
Strip paint, varnish, and epoxy, penetrating several layers at once.
Strip up to 10 layers of polyurethane and marine coatings at once. Use these removers to prepare surfaces for refinishing.
Cut through paint and coatings on powder-coated metal and plastic. Use these low-odor fast-acting removers to prepare surfaces for refinishing.
Dissolve rust on iron and steel.
These thinners are acetone and naphtha based, so they're low odor. They're often used for cleanup and to thin paint for spray applications.
Avoid the fumes and strong smell of traditional thinners with these odorless thinners. They’re often used for cleanup and to thin paint for spray applications.
These thinners are often used for cleanup and to thin paint for spray applications.
Dilute thick epoxies so they're thin enough to spray. These thinners evaporate quickly enough that sprayed coatings won't sag, but slowly enough that they still bond well.
These additives slow down paint’s cure time, allowing it to flow better and fill in brushstrokes for a smooth finish. They also improve adhesion.
Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.
Keep the surface of your porcelain fixtures looking like new.
Replace cassettes in retractable belt barriers.