We will reply to your message within an hour.
Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.
The short bit on these sockets fits in spaces where height clearance is limited.
Extra-long bits allow access to hard-to-reach fasteners.
The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.
These sockets are also known as pin-in-hex or pin-in-socket bits.
Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet IEC 60900.
Pivot the head to access fasteners from an angle.
Turn many sizes of square, hex, and 8-point fasteners with one socket. Place over the fastener and 54 pins move to grip it securely.
These short sockets fit spaces where height clearance is limited.
Extra length allows access to fasteners on long bolts.
Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
With a plastic insert, these sockets firmly grip hex nuts and bolts without rounding them or scratching highly polished finishes.
Designed to fit inside strut channel, these sockets make it easier to mount the channel than using an extension or additional tools.
The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.
A rubber insert grips the plug to prevent damage.
Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.
Make maximum contact with all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.
The 12-point shape quickly positions on hex fasteners.
Tighten or loosen nuts and bolts without damaging the finish.
With a smaller OD than standard sockets, these fit between tightly spaced fasteners.
Achieve the best possible grip on hex fasteners and prevent rounding.
A magnet holds the fastener securely enough to drive self-tapping screws.
Designed to remove and install dual wheels on trucks and trailers, these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels.
Use bit sockets as an alternative to a screwdriver or L-key.
The hex shape grips hex fasteners and prevents rounding.
Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.
For high quality at a lower price, choose these U.S.A.-made sets.
Suitable for occasional maintenance work, these sets are imported.
Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.
Turn nuts on bolts and threaded rod, which pass through these sockets.
Make maximum contact on all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.
Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.
The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.
Remove and install dual wheels on trucks and trailers with the sockets in these sets.
Magnets hold sockets securely in place.
Store sockets on posts marked with the size.
The slots in these low-profile organizers are a different color than the base so it's clear when tools are missing from your bench top or drawer.
The rail is smooth plastic so the clips move more easily than on steel-rail organizers.
Move the sliding clips to any position along the rail to hold a variety of sockets.
Hold different square drive sizes on the four clip rails stored in these trays.
Apply more torque than your wrench can deliver on its own. Use a multiplier with a torque wrench to ensure you do not exceed the maximum input torque.
Anchor these multipliers for added stability.
Turn sockets from above when there's not room to swing a standard wrench handle.
The ratcheting mechanism turns sockets quickly.
Bend around obstructions to turn hard-to-reach fasteners.
Fasten quickly with these crank-style handles.
Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.
Turn sockets in the most confined spaces.
The 20° offset head provides clearance when reaching over obstructions.
Made of aluminum-bronze, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Pivot the head to access fasteners in tight spots.
No need to pull the socket off the tool—push a button to release.
Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.
When the ratchet head becomes worn or damaged, change it out for a new one.
Twist the grip to rapidly turn a socket before final tightening or to remove a fastener once loosened. The handle also swings like a traditional ratchet wrench.
A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.
Also known as a construction or spud handle, wrenches use the pointed end to align bolt holes.
The shaft on these wrenches extends and locks.
A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench.
The handle is covered in rubber for a comfortable grip.
The L shape provides clearance when reaching over obstructions.
Position the head anywhere along the handle.
Extend the shaft for additional length.
Pivot the head for access to fasteners in tight spots.
A rubber coating provides a comfortable grip.
Also known as impact drivers, use these tools with impact sockets to break frozen bolts and screws free. Strike with a hammer to tighten and loosen fasteners.
Built for durability, these high-performance tools handle the demands of high-volume production and tough maintenance applications.
Use these tools for general shop applications.
These tools are suitable for general shop, maintenance, and automotive work.
Built for durability, these wrenches handle the demands of high-volume production and tough maintenance applications.
Use these wrenches for medium-volume production, general maintenance, and construction applications.
Use these wrenches with impact sockets only.
Use sockets with tools that accept hex shanks, such as impact drivers and power drills.
Attach one of these adapters to a socket to turn it with an open-end or box wrench.
Turn sockets with a bit screwdriver.
Slip these magnetic inserts into your sockets to keep fasteners from falling out.
These wrenches have one pivoting socket end and one open end.
Turn nuts on bolts and threaded rod, which can pass through the short end of the wrench. For additional leverage, slip a bar through the short end to create a T-handle.
Pivot the socket end to access hard-to-reach fasteners.
Turn lug bolts on car and truck wheels. These wrenches have a different socket size at each end.
Change heads to use these tools as an open-end, box, square drive, or hex-key wrench.
When the set torque is reached, these wrenches slip to disengage and stop overtightening.
Instead of carrying around a large drum plug wrench, keep these sockets in your toolbox and turn with a ratchet wrench.
Also known as bung wrenches, these tools are used to install and remove screw-in drum plugs.
Made of spark-inhibiting materials, these wrenches are also corrosion resistant.
A dial shows how torque measurements change as you turn the driver. Use these tools to fasten to a specific torque, determine fastener torque specifications, and identify the torque required to loosen tightened fasteners.
Attach a socket to the 1/4" square drive tip. These tools have a dial that shows how torque measurements change as you turn the driver. Use to fasten to a specific torque, determine fastener torque specifications, and identify the torque required to loosen tightened fasteners.
Attach a socket to the 1/4" square drive tip to turn hex nuts and hex head screws. When set torque is reached, these drivers signal with an audible click.