6105 Aluminum Bars | McMaster-Carr

Filter by

T-Slotted Framing Rail Profile

System of Measurement

Rail Height

Bracket Type

Length

Surface Bracket Style

Color

Single Rail Profile Style

Corner Bracket Style

Rail Width

T-Slotted Framing Component

Mounting Fastener Thread Size

Rail Construction

Rail Texture

Double Rail Profile Style

Quad Rail Profile Style

Material

For Rail Connection Angle

Number of Mounting Fasteners Included

Concealed Bracket Style

REACH Compliance

RoHS Compliance

DFARS Compliance

Forward

How can we improve?

265 Products

T-Slotted Framing Rails

Use this versatile framing to configure machine guards, enclosures, carts, and workstations. These rails have continuous T-slots for attaching fittings. When choosing how many slots you want on your rail, consider how much flexibility you need for your setup and how finished you'd like your structure to appear. The more slots the rail has, the more design flexibility you will have. Keep in mind, open slots can collect dust and debris. Rails with closed sides give you a finished appearance but are more difficult to reconfigure or add components to later. All of these rails are made of aluminum.

Double-, triple-, and quad-profile rails are good for large structural applications, such as beams and posts. Typically, the larger the rail profile, the stronger the rail.

Solid rails are stronger than hollow rails. Hollow rails are lighter and more economical than solid rails.

Grooved rails help you align rails when connecting them. They also camouflage dents and marks better than smooth rails but can collect dust and grime. Smooth rails give a finished look. With no indentations to collect dust, they’re easier to clean than grooved rails. However, dents and marks are easier to see.

Black rails fade into the background and hide dirt and grime. They're good for vision systems where non-reflective material is needed. Yellow rails draw attention and are often used to build machine guards.

Cut-to-length rails can be ordered in increments of 0.125” or 0.25 cm.

For technical drawings and 3-D models, click on a part number.

Single Four Slot Rails—Foot

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		1/2 ft.	1 ft.	1 1/2 ft.	2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.
1"	1"	Solid	0.256"	0.323"	000000000	00000	00000	000000	000000	000000	000000	000000	000000	000000	000000
1 1/2"	1 1/2"	Solid	0.32"	0.484"	000000000	0000	00000	00000	00000	00000	00000	00000	00000	00000	00000
Silver Anodized Aluminum—Smooth Rail Texture
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	0000000	00	0000	00	00000	00000	00000	00000	00000	00000	00000
25mm	25mm	Solid	6.5mm	8.1mm	0000000	00	0000	00	00000	00000	00000	00000	00000	00000	00000
Black Anodized Aluminum—Grooved Rail Texture
1"	1"	Solid	0.256"	0.323"	000000000	0000	00000	00000	00000	00000	00000	00000	00000	00000	00000
1 1/2"	1 1/2"	Solid	0.32"	0.484"	000000000	00000	00000	00000	00000	00000	00000	00000	000000	000000	000000
Yellow Powder-Coated Aluminum—Grooved Rail Texture
1 1/2"	1 1/2"	Solid	0.32"	0.484"	0000000	00	00000	00	00000	00000	00000	00000	00000	00000	000000

Single Four Slot Rails—Inch

Solid Construction

Grooved Texture

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		1"	2"	3"	4"	5"	7"	8"	9"	10"	11"
1"	1"	Solid	0.256"	0.323"	000000000	00000	00000	00000	00000	00000	00000	00000	00000	00000	00000

Single Inline Two Slot Rails—Foot

Hollow Construction

Smooth Texture

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		1 ft.	2 ft.	4 ft.	6 ft.	8 ft.
40mm	40mm	Hollow	8mm	12.2mm	0000000	000000	000000	000000	000000	000000

Single Inline Two Slot Rails—Cut-to-Length (per Inch)

Hollow Construction

Grooved Texture

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Choose a Length		Per Inch
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	1" to 242" in 0.125" increments	000000000	00000

Single Corner Two Slot Rails—Foot

Solid Construction

Hollow Construction

Grooved Texture

Smooth Texture

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.
40mm	40mm	Hollow	8mm	12.2mm	0000000	000000	00	000000	00	000000	000000
Black Anodized Aluminum—Grooved Rail Texture
1"	1"	Solid	0.256"	0.323"	00000000	00	000000	00	000000	00	00

Single Corner Two Slot Rails—Cut-to-Length (per Inch)

Hollow Construction

Grooved Texture

To order: Please specify length in increments of 0.125” within the range listed.

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.	Choose a Length		Per Inch
1 1/2"	1 1/2"	Hollow	0.32"	0.484"	1" to 242" in 0.125" increments	000000000	00000

Single One Slot Rails—Foot

Solid Construction

Grooved Texture

Black Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		1 ft.	3 ft.	5 ft.
1"	1"	Solid	0.256"	0.323"	00000000	000000	000000	000000

Double Six Slot Rails—Foot

Solid Construction

Grooved Texture

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		1/2 ft.	1 ft.	1 1/2 ft.	2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.
2"	1"	Solid	0.256"	0.323"	000000000	00000	000000	000000	000000	000000	000000	000000	000000	000000	000000
3"	1 1/2"	Solid	0.32"	0.484"	000000000	00000	00000	00000	00000	00000	00000	00000	000000	000000	000000

Double Corner Three Slot Rails—Foot

Hollow Construction

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		2 ft.	4 ft.	6 ft.	8 ft.	10 ft.
80mm	40mm	Hollow	8mm	12.2mm	0000000	000000	000000	0000000	0000000	0000000

Double Corner Two Slot Rails—Foot

Hollow Construction

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		2 ft.	4 ft.	6 ft.	8 ft.	10 ft.
80mm	40mm	Hollow	8mm	12.2mm	0000000	000000	000000	0000000	0000000	0000000

Double Inline Two Slot Rails—Foot

Hollow Construction

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		2 ft.	4 ft.	6 ft.	8 ft.	10 ft.
80mm	40mm	Hollow	8mm	12.2mm	0000000	000000	000000	0000000	0000000	0000000

Triple Rails—Foot

Solid Construction

Grooved Texture

Smooth Texture

Silver Anodized Aluminum—Smooth Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		1 ft.	2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.
75mm	25mm	Solid	6.5mm	8.1mm	0000000	000000	000000	000000	000000	000000	000000	000000	0000000
120mm	40mm	Solid	8mm	12.2mm	000000	00000	00000	00000	000000	000000	000000	000000	000000
Black Anodized Aluminum—Grooved Rail Texture
3"	1"	Solid	0.256"	0.323"	0000000	00	00000	00	00000	00	000000	000000	000000
4 1/2"	1 1/2"	Solid	0.32"	0.484"	0000000	00	00000	00	000000	00	000000	000000	000000

Quad Rails—Foot

Solid Construction

Hollow Construction

Grooved Texture

Silver Anodized Aluminum—Grooved Rail Texture
Rail Ht.	Rail Wd.	Rail Construction	T-Slot Wd.	T-Slot Dp.		1 ft.	2 ft.	3 ft.	4 ft.	5 ft.	6 ft.	8 ft.	10 ft.
2"	2"	Solid	0.256"	0.323"	000000000	000000	000000	000000	000000	000000	000000	0000000	0000000
3"	3"	Solid	0.32"	0.484"	000000000	00000	00000	000000	000000	000000	000000	000000	000000
Black Anodized Aluminum—Grooved Rail Texture
3"	3"	Hollow	0.32"	0.484"	000000000	00	000000	000000	000000	00	000000	000000	000000

T-Slotted Framing Structural Brackets

Connect T-slotted rails and reinforce joints for structural stability. Fasteners are included.

For technical drawings and 3-D models, click on a part number.

Corner Brackets for Single Rails

Corner

Extended Corner

Slotted Corner

Extended Slotted Corner

Open Gusset

Extended Open Gusset

Corner brackets are also known as angle brackets.

Extended brackets have more connection points for stronger connections than standard-length brackets.

Slotted corner brackets have elongated mounting holes for increased adjustability.

Gusset brackets are reinforced to limit sway for more structural stability than standard corner brackets. Open gusset brackets give you easy access to the fasteners, which is useful if your application requires frequent adjustments.

Silver
For Rail Ht.	Lg.	Rail Machining	Mounting Fasteners Included	Material		Each
Corner
1"	1"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2"	1 1/2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	0000
25mm	63/64"	Not Required	Yes	Anodized 6105 Aluminum	00000000	0000
Extended Corner
1"	2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	0000
1 1/2"	3"	Not Required	Yes	Anodized 6105 Aluminum	000000000	0000
25mm	1 31/32"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Slotted Corner
1"	1"	Not Required	Yes	Anodized 6105 Aluminum	00000000	0000
1 1/2"	1 1/2"	Not Required	Yes	Anodized 6105 Aluminum	00000000	0000
25mm	63/64"	Not Required	Yes	Anodized 6105 Aluminum	00000000	0000
40mm	1 9/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	0000
Extended Slotted Corner
1"	1"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
1 1/2"	1 1/2"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
40mm	1 9/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Open Gusset
1"	1"	Not Required	Yes	Anodized 6105 Aluminum	000000000	0000
1 1/2"	1 1/2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
25mm	63/64"	Not Required	Yes	Anodized 6105 Aluminum	00000000	0000
Extended Open Gusset
1"	2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2"	3"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
25mm	1 31/32"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Black
Corner
1"	1"	Not Required	Yes	Anodized 6105 Aluminum	000000000	0000
1 1/2"	1 1/2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
25mm	63/64"	Not Required	Yes	Anodized 6105 Aluminum	00000000	0000
Extended Corner
1"	2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2"	3"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
25mm	1 31/32"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Slotted Corner
1"	1"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2"	1 1/2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
40mm	1 37/64"	Not Required	Yes	Anodized 6105 Aluminum	0000000	00000
Extended Slotted Corner
1"	1"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2"	1 1/2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
Open Gusset
1"	1"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2"	1 1/2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
25mm	63/64"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Extended Open Gusset
1"	2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2"	3"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000

Corner Brackets for Double and Quad Rails

Corner

Extended Corner

Open Gusset

Extended Open Gusset

Corner brackets are also known as angle brackets.

Extended brackets have more connection points for stronger connections than standard-length brackets.

Silver
For Rail Ht.	Lg.	Rail Machining	Mounting Fasteners Included	Mounting Hole Style	Material		Each
Corner
2"	1"	Not Required	Yes	__	Anodized 6105 Aluminum	000000000	000000
3"	1 1/2"	Not Required	Yes	__	Anodized 6105 Aluminum	000000000	00000
50mm	63/64"	Not Required	Yes	__	Anodized 6105 Aluminum	00000000	00000
Extended Corner
2"	2"	Not Required	Yes	__	Anodized 6105 Aluminum	000000000	00000
3"	3"	Not Required	Yes	__	Anodized 6105 Aluminum	000000000	00000
50mm	63/64"	Not Required	Yes	Slotted	Anodized 6105 Aluminum	00000000	00000
50mm	1 31/32"	Not Required	Yes	__	Anodized 6105 Aluminum	00000000	00000
Open Gusset
2"	1"	Not Required	Yes	__	Anodized 6105 Aluminum	000000000	00000
3"	1 1/2"	Not Required	Yes	__	Anodized 6105 Aluminum	000000000	00000
Extended Open Gusset
2"	2"	Not Required	Yes	__	Anodized 6105 Aluminum	000000000	00000
3"	3"	Not Required	Yes	__	Anodized 6105 Aluminum	000000000	00000
50mm	1 31/32"	Not Required	Yes	__	Anodized 6105 Aluminum	00000000	00000
Black
Corner
2"	1"	Not Required	Yes	__	Anodized 6105 Aluminum	000000000	00000
3"	1 1/2"	Not Required	Yes	__	Anodized 6105 Aluminum	000000000	00000
50mm	63/64"	Not Required	Yes	__	Anodized 6105 Aluminum	00000000	00000
Extended Corner
2"	2"	Not Required	Yes	__	Anodized 6105 Aluminum	000000000	00000
3"	3"	Not Required	Yes	__	Anodized 6105 Aluminum	000000000	00000
50mm	1 31/32"	Not Required	Yes	__	Anodized 6105 Aluminum	00000000	00000
80mm	1 37/64"	Not Required	Yes	Slotted	Anodized 6105 Aluminum	0000000	00000
Open Gusset
2"	1"	Not Required	Yes	__	Anodized 6105 Aluminum	00000000	00000
3"	1 1/2"	Not Required	Yes	__	Anodized 6105 Aluminum	00000000	00000
Extended Open Gusset
2"	2"	Not Required	Yes	__	Anodized 6105 Aluminum	00000000	00000
3"	3"	Not Required	Yes	__	Anodized 6105 Aluminum	00000000	00000
50mm	1 31/32"	Not Required	Yes	__	Anodized 6105 Aluminum	00000000	00000

Corner Brackets for Triple Rails

Corner

Extended Corner

Corner brackets are also known as angle brackets.

Extended brackets have more connection points for stronger connections than standard-length brackets.

Corner
For Rail Ht.	Lg.	Color	Material	Rail Machining	Mounting Fasteners Included		Each
3"	1"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	000000
3"	1"	Black	Anodized 6105 Aluminum	Not Required	Yes	0000000	00000
4 1/2"	1 1/2"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000
Extended Corner
3"	3"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000
4 1/2"	4 1/2"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000

Outside Corner Brackets for Single Rails

Three-Way Outside Corner Bracket for Radius Two-Slot Rails

Corner brackets are also known as angle brackets.

Outside corner and three-way outside corner brackets connect the ends of rails for a finished look at your corner. To install, tap the existing hole in the end of each rail and screw the bracket in.

Three-Way Outside Corner for Radius Two Slot Single Rails
For Rail Ht.	Lg.	Color	Material	Required Tap Thread Size	Rail Machining	Mounting Fasteners Included		Each
1"	1"	Silver	Anodized 6105 Aluminum	1/4"-20	Required	Yes	00000000	000000
1 1/2"	1 1/2"	Silver	Anodized 6105 Aluminum	5/16"-18	Required	Yes	00000000	00000

Corner Adapter Brackets

Left Side Adapter Bracket for Double/Quad to Single Rails

Right Side Adapter Bracket for Double/Quad to Single Rails

Center Adapter Bracket for Double/Quad to Single Rails

Center Adapter Bracket for Triple to Double/Quad Rails

Corner brackets are also known as angle brackets.

Adapter brackets connect rails with different rail profiles.

Left Side Adapter Bracket for Double/Quad to Single Rails
For Rail Ht.	Lg.	Color	Material	Rail Machining	Mounting Fasteners Included		Each
1"	2"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	000000
1 1/2"	3"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000
Right Side Adapter Bracket for Double/Quad to Single Rails
1"	2"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000
1 1/2"	3"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000
Center Adapter Bracket for Double/Quad to Single Rails
1"	2"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000
1 1/2"	3"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000
40mm	3 5/32"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000
Center Adapter Bracket for Triple to Double/Quad Rails
1"	2"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000
1 1/2"	3"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000

Surface Brackets for Single Rails

Straight

Extended Straight

15° Angle

30° Angle

45° Angle

60° Angle

90° Angle

Extended 90° Angle

Cross

Tee

Flush Tee

Flush 90° Angle

Surface brackets create strong connection points because they secure to the surface of rails.

Straight brackets are simple brackets that can be used to make 90°, end-to-end, and parallel connections.

Extended brackets have more connection points for stronger connections than standard-length brackets.

15° angle brackets connect rails at a slight angle, so they are often used to create sloped shelves.

90° angle brackets make a corner or create another 90° connection along your rail.

Flush tee and flush 90° angle brackets create a finished appearance. However, they are not as strong as standard tee or 90° angle brackets.

Silver
For Rail Ht.	Lg.	Rail Machining	Mounting Fasteners Included	Material		Each
Straight
1", 25mm	1 31/32"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
1", 25mm	2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	0000
1 1/2", 40mm	3"	Not Required	Yes	Anodized 6105 Aluminum	000000000	0000
Extended Straight
1"	4"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2"	6"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1", 25mm	3 15/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
15° Angle
1"	2 1/4"	Not Required	Yes	Anodized 6105 Aluminum	0000000	00000
1 1/2"	3 1/2"	Not Required	Yes	Anodized 6105 Aluminum	0000000	00000
40mm	3 11/16"	Not Required	Yes	Anodized 6105 Aluminum	0000000	00000
30° Angle
1"	2 1/2"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
1 1/2"	3 1/2"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
40mm	3 5/8"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
45° Angle
1"	2 3/4"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2"	4 1/2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
40mm	4 3/4"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
60° Angle
1"	3"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2"	4 1/2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
40mm	4 3/4"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
90° Angle
1"	3"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2"	4 1/2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
25mm	2 15/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Extended 90° Angle
1"	4"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
1 1/2"	6"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
25mm	3 15/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
40mm	6 5/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
45mm	5 5/16"	Not Required	Yes	Anodized 6105 Aluminum	0000000	00000
Cross
1"	5"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
1 1/2"	7 1/2"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
25mm	4 15/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
40mm	7 7/8"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
45mm, 60mm	8 7/8"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Tee
1"	4"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
1 1/2"	6"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
1", 25mm	3"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2", 40mm	4 1/2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
25mm	3 15/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Flush Tee
1"	3"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
1 1/2"	4 1/2"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
20mm	2 3/8"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
25mm	2 15/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
30mm	3 9/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
40mm	4 3/4"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
45mm, 60mm	5 5/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Flush 90° Angle
1"	3"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
1 1/2"	4 1/2"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
20mm	2 3/8"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
25mm	2 15/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
30mm	3 9/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
40mm	4 3/4"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
45mm	5 5/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Black
Straight
1", 25mm	2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2", 40mm	3"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
25mm	1 31/32"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Extended Straight
1"	4"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2"	6"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
25mm	3 15/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
15° Angle
1"	2 1/4"	Not Required	Yes	Anodized 6105 Aluminum	0000000	00000
1 1/2"	3 1/2"	Not Required	Yes	Anodized 6105 Aluminum	0000000	00000
40mm	3 11/16"	Not Required	Yes	Anodized 6105 Aluminum	0000000	00000
30° Angle
1"	2 1/2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2"	3 1/2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
45° Angle
1"	2 3/4"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
1 1/2"	4 1/2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
60° Angle
1"	3"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2"	4 1/2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
90° Angle
1"	3"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2"	4 1/2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
25mm	2 15/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Extended 90° Angle
1"	4"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2"	6"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
40mm	6 5/16"	Not Required	Yes	Anodized 6105 Aluminum	0000000	00000
45mm	5 5/16"	Not Required	Yes	Anodized 6105 Aluminum	0000000	00000
Cross
1 1/2"	7 1/2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1", 25mm	5"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
Tee
1 1/2"	6"	Not Required	Yes	Anodized 6105 Aluminum	0000000	00000
1", 25mm	3"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2", 40mm	4 1/2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
25mm	3 15/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Flush Tee
1"	3"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2"	4 1/2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
40mm	4 3/4"	Not Required	Yes	Anodized 6105 Aluminum	0000000	00000
Flush 90° Angle
1"	3"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
1 1/2"	4 1/2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
40mm	4 3/4"	Not Required	Yes	Anodized 6105 Aluminum	0000000	00000
45mm, 60mm	5 5/16"	Not Required	Yes	Anodized 6105 Aluminum	0000000	00000
Yellow
Straight
1", 25mm	2"	Not Required	Yes	Anodized 6105 Aluminum	00000000	0000
1 1/2", 40mm	3"	Not Required	Yes	Anodized 6105 Aluminum	00000000	0000
90° Angle
1"	3"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
1 1/2"	4 1/2"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Tee
1", 25mm	3"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
1 1/2", 40mm	4 1/2"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000

Surface Brackets for Double and Quad Rails

Straight

Extended Straight

90° Angle

Tee

Cross

Surface brackets create strong connection points because they secure to the surface of rails.

Straight brackets are simple brackets that can be used to make 90°, end-to-end, and parallel connections.

Extended brackets have more connection points for stronger connections than standard-length brackets.

90° angle brackets make a corner or create another 90° connection along your rail.

Silver
For Rail Ht.	Lg.	Rail Machining	Mounting Fasteners Included	Material		Each
Straight
2"	2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	000000
3"	3"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
50mm	1 31/32"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Extended Straight
2"	4"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
3"	6"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
50mm	3 15/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
90° Angle
2"	4"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
3"	6"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
50mm	3 15/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Tee
2"	4"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
3"	6"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
50mm	3 15/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Cross
2"	6"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
3"	9"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Black
Straight
2"	2"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
3"	3"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
50mm	1 31/32"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Extended Straight
2"	4"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
3"	6"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
50mm	3 15/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
90° Angle
2"	4"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
3"	6"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
50mm	3 15/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000
Tee
2"	4"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
3"	6"	Not Required	Yes	Anodized 6105 Aluminum	000000000	00000
50mm	3 15/16"	Not Required	Yes	Anodized 6105 Aluminum	00000000	00000

Adjustable-Angle Brackets

Surface

Adjustable-angle brackets let you mount one rail to another at many different angles.

Surface adjustable-angle brackets come in pairs and let you mount one rail next to another at any angle but not parallel to each other.

For Rail Ht.
Single	Double and Quad	Triple	Lg.	Color	Material	Rail Machining	Mounting Fasteners Included		Each
Surface
1"	2"	3"	11/16"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	000000
1 1/2"	3"	4 1/2"	1 3/16"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000

Reducer Corner Brackets

Corner Reducer Bracket for Single Rails

Extended Corner Reducer Bracket for Double and Quad Rails

Reducer brackets connect rails of different rail heights.

Corner brackets are also known as angle brackets.

Extended brackets have more connection points for stronger connections than standard-length brackets.

Corner Reducer for Single Rails
For Rail Ht.	Lg.	Color	Material	Rail Machining	Mounting Fasteners Included		Each
1", 1 1/2"	1 1/2"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000
Extended Corner Reducer for Double and Quad Rails
2", 3"	3"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000

Reducer Surface Brackets

Reducer Bracket for Single Rails

Flush

Extended Flush Reducer Bracket for Double and Quad Rails

Offset

Reducer brackets connect rails of different heights.

Surface brackets create strong connection points because they secure to the surface of rails.

Flush reducer brackets align the faces of the rails.

Offset reducer brackets have an offset to align the T-slots of the different-size rails.

Extended brackets have more connection points for stronger connections than standard-length brackets.

Flush Reducer for Single Rails
For Rail Ht.	Lg.	Color	Material	Rail Machining	Mounting Fasteners Included		Each
1", 1 1/2"	2 1/2"	Silver	Anodized 6105 Aluminum	Not Required	Yes	000000000	00000
Offset Reducer for Single Rails
1", 1 1/2"	2 1/2"	Silver	Anodized 6105 Aluminum	Not Required	Yes	000000000	00000
Extended Flush Reducer for Double and Quad Rails
1", 1 1/2"	4"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000
2", 3"	5"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000

Surface Adapter Brackets

30° Adapter Bracket for Double/Quad to Single Rails

45° Adapter Bracket for Double/Quad to Single Rails

60° Adapter Bracket for Double/Quad to Single Rails

90° Adapter Bracket for Double/Quad to Single Rails

Tee Adapter Bracket for Triple to Double/Quad Rails

Adapter brackets connect rails with different rail profiles.

Surface brackets create strong connection points because they secure to the surface of rails.

30° Angle Adapter Bracket for Double/Quad to Single Rails
For Rail Ht.	Lg.	Color	Material	Rail Machining	Mounting Fasteners Included		Each
1 1/2"	5"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	000000
45° Angle Adapter Bracket for Double/Quad to Single Rails
1 1/2"	6"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000
60° Angle Adapter Bracket for Double/Quad to Single Rails
1 1/2"	6"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000
90° Angle Adapter Bracket for Double/Quad to Single Rails
1"	4"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000
1 1/2"	6"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000
40mm	6 5/16"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000
Tee Adapter Bracket for Triple to Double/Quad Rails
1 1/2"	6"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000
3"	4"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000

Diagonal Braces for Single Rails

With ends mitered at a 45° angle, attach diagonal braces inside corners to create sturdier 90° connections than other brackets to reinforce your structures.

					Silver		Black
For Rail Ht.	Lg.	Material	Rail Machining	Mounting Fasteners Included		Each		Each
1"	6"	Anodized 6105 Aluminum	Not Required	Yes	000000000	000000	000000000	000000
1"	12"	Anodized 6105 Aluminum	Not Required	Yes	000000000	00000	000000000	00000
1"	18"	Anodized 6105 Aluminum	Not Required	Yes	000000000	00000	000000000	00000
1"	24"	Anodized 6105 Aluminum	Not Required	Yes	000000000	00000	000000000	00000
1 1/2"	6"	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000	000000000	00000
1 1/2"	12"	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000	000000000	00000
1 1/2"	18"	Anodized 6105 Aluminum	Not Required	Yes	000000000	00000	000000000	00000
1 1/2"	24"	Anodized 6105 Aluminum	Not Required	Yes	000000000	00000	000000000	00000

Diagonal Braces for Double and Quad Rails

With ends mitered at a 45° angle, attach diagonal braces inside corners to create sturdier 90° connections than other brackets to reinforce your structures.

					Silver		Black
For Rail Ht.	Lg.	Material	Rail Machining	Mounting Fasteners Included		Each		Each
2"	6"	Anodized 6105 Aluminum	Not Required	Yes	000000000	000000	000000000	000000
2"	12"	Anodized 6105 Aluminum	Not Required	Yes	000000000	00000	000000000	00000
2"	18"	Anodized 6105 Aluminum	Not Required	Yes	000000000	00000	000000000	00000
2"	24"	Anodized 6105 Aluminum	Not Required	Yes	000000000	00000	000000000	00000
3"	6"	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000	000000	00
3"	12"	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000	000000	00
3"	18"	Anodized 6105 Aluminum	Not Required	Yes	000000000	00000	000000	00
3"	24"	Anodized 6105 Aluminum	Not Required	Yes	000000000	00000	000000	00

Diagonal Braces for Triple Rails

With ends mitered at a 45° angle, attach diagonal braces inside corners to create sturdier 90° connections than other brackets to reinforce your structures.

For Rail Ht.	Lg.	Color	Material	Rail Machining	Mounting Fasteners Included		Each
4 1/2"	6"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	000000
4 1/2"	12"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	00000

Extended Corner Concealed Brackets

Concealed brackets mount internally and stay out of sight once installed.

Extended corner concealed brackets have more connection points for stronger connections than standard-length brackets. They slide into the T-slots of your two intersecting rails, leaving the outside surface slots open for mounting other components. Tighten the included set screws to hold them in place.

For Rail Ht.
Single	Double and Quad	Triple	Lg.	Color	Material	Rail Machining	Mounting Fasteners Included		Each
1 1/2", 40mm	3", 80mm	4 1/2", 120mm	2 1/2"	Silver	Anodized 6105 Aluminum	Not Required	Yes	00000000	000000