How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Metal Cam-and-Groove Hose Couplings for Water
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t42-t12c1-c01h-digital-master1572989813-p9@halfx_637085721788986714.png?ver=imagenotfound)
A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug.
Plugs with male threaded end are also known as F adapters.
Plugs with female threaded end are also known as A adapters.
Plugs with barbed end are also known as E adapters. Insert the barbed end into plastic or rubber hose and secure with a clamp.
Plugs with flanged end are also known as PFA adapters. Bolt the flanged end to another same-size flange with a gasket (sold separately).
Plug connectors and reducers are also known as SA spool adapters.
Couplings with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.
Sockets with male threaded end are also known as B couplers.
Straight sockets with female threaded end are also known as D couplers.
Straight sockets with barbed end are also known as C couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.
90° elbow sockets with female threaded end are also known as LD couplers.
90° elbow sockets with barbed end are also known as CL couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.
Socket connectors and reducers are also known as C × C couplers.
Plug-to-socket reducing adapters are also known as A × C couplers.
Aluminum couplings are lighter in weight than brass plugs and sockets. They have good abrasion and corrosion resistance. Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t42p1-c01h-digitall@halfx_637085713751892353.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Coupling Size | Plug OD | Pipe Size | Max. Pressure | Each | |
Anodized Aluminum | |||||
---|---|---|---|---|---|
1/2 | 15/16" | 1/2 | 250 psi @ 72° F | 00000000 | 000000 |
3/4 | 1 1/4" | 1/2 | 250 psi @ 72° F | 00000000 | 00000 |
3/4 | 1 1/4" | 3/4 | 250 psi @ 72° F | 0000000 | 00000 |
1 | 1 7/16" | 1 | 250 psi @ 72° F | 0000000 | 00000 |
1 | 1 7/16" | 1 1/2 | 250 psi @ 72° F | 00000000 | 00000 |
1 | 1 7/16" | 2 | 250 psi @ 72° F | 00000000 | 00000 |
1 1/4 | 1 13/16" | 1 1/4 | 250 psi @ 72° F | 0000000 | 00000 |
1 1/2 | 2 1/8" | 1 | 250 psi @ 72° F | 00000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2 | 250 psi @ 72° F | 0000000 | 00000 |
1 1/2 | 2 1/8" | 2 | 250 psi @ 72° F | 00000000 | 00000 |
2 | 2 1/2" | 1 1/2 | 250 psi @ 72° F | 00000000 | 00000 |
2 | 2 1/2" | 2 | 250 psi @ 72° F | 0000000 | 00000 |
2 | 2 1/2" | 3 | 250 psi @ 72° F | 00000000 | 00000 |
2 1/2 | 3" | 2 1/2 | 200 psi @ 72° F | 0000000 | 00000 |
3 | 3 5/8" | 1 1/2 | 200 psi @ 72° F | 00000000 | 00000 |
3 | 3 5/8" | 2 | 200 psi @ 72° F | 00000000 | 00000 |
3 | 3 5/8" | 3 | 200 psi @ 72° F | 0000000 | 00000 |
3 | 3 5/8" | 4 | 200 psi @ 72° F | 00000000 | 000000 |
4 | 4 3/4" | 2 | 150 psi @ 72° F | 00000000 | 00000 |
4 | 4 3/4" | 3 | 150 psi @ 72° F | 00000000 | 000000 |
4 | 4 3/4" | 4 | 150 psi @ 72° F | 0000000 | 00000 |
5 | 5 3/4" | 5 | 75 psi @ 72° F | 00000000 | 000000 |
6 | 6 15/16" | 6 | 75 psi @ 72° F | 0000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/876/8769n149polished-steelpositive_front_positive_right_flop15_1611325141_439@halfx_637469005640959106.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Coupling Size | Plug OD | Pipe Size | Max. Pressure | Each | |
Anodized Aluminum | |||||
---|---|---|---|---|---|
1/2 | 15/16" | 1/2 | 250 psi @ 72° F | 00000000 | 000000 |
3/4 | 1 1/4" | 1/2 | 250 psi @ 72° F | 00000000 | 00000 |
3/4 | 1 1/4" | 3/4 | 250 psi @ 72° F | 00000000 | 00000 |
1 | 1 7/16" | 1 | 250 psi @ 72° F | 00000000 | 00000 |
1 1/4 | 1 13/16" | 1 1/4 | 250 psi @ 72° F | 00000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2 | 250 psi @ 72° F | 00000000 | 00000 |
2 | 2 1/2" | 2 | 250 psi @ 72° F | 00000000 | 00000 |
2 1/2 | 3" | 2 1/2 | 200 psi @ 72° F | 00000000 | 00000 |
3 | 3 5/8" | 3 | 200 psi @ 72° F | 00000000 | 00000 |
4 | 4 3/4" | 4 | 150 psi @ 72° F | 00000000 | 000000 |
6 | 6 15/16" | 6 | 75 psi @ 72° F | 00000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t52p1-c01h-digitall@halfx_637085716109780736.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Coupling Size | Plug OD | Pipe Size | Max. Pressure | Each | |
Anodized Aluminum | |||||
---|---|---|---|---|---|
1/2 | 15/16" | 1/2 | 250 psi @ 72° F | 00000000 | 000000 |
3/4 | 1 1/4" | 1/2 | 250 psi @ 72° F | 00000000 | 00000 |
3/4 | 1 1/4" | 3/4 | 250 psi @ 72° F | 0000000 | 00000 |
3/4 | 1 1/4" | 1 | 250 psi @ 72° F | 00000000 | 00000 |
1 | 1 7/16" | 1 | 250 psi @ 72° F | 0000000 | 00000 |
1 | 1 7/16" | 1 1/2 | 250 psi @ 72° F | 00000000 | 00000 |
1 1/4 | 1 13/16" | 1 1/4 | 250 psi @ 72° F | 0000000 | 00000 |
1 1/2 | 2 1/8" | 1 | 250 psi @ 72° F | 00000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2 | 250 psi @ 72° F | 0000000 | 00000 |
1 1/2 | 2 1/8" | 2 | 250 psi @ 72° F | 00000000 | 00000 |
2 | 2 1/2" | 1 1/2 | 250 psi @ 72° F | 00000000 | 00000 |
2 | 2 1/2" | 2 | 250 psi @ 72° F | 0000000 | 00000 |
2 | 2 1/2" | 3 | 250 psi @ 72° F | 00000000 | 00000 |
2 1/2 | 3" | 2 1/2 | 200 psi @ 72° F | 0000000 | 00000 |
3 | 3 5/8" | 2 | 200 psi @ 72° F | 00000000 | 00000 |
3 | 3 5/8" | 3 | 200 psi @ 72° F | 0000000 | 00000 |
4 | 4 3/4" | 3 | 150 psi @ 72° F | 00000000 | 00000 |
4 | 4 3/4" | 4 | 150 psi @ 72° F | 0000000 | 00000 |
5 | 5 3/4" | 5 | 75 psi @ 72° F | 00000000 | 000000 |
6 | 6 15/16" | 6 | 75 psi @ 72° F | 0000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/876/8769n113polished-steelpositive_front_positive_right_flop15_1611326402_572@halfx_637469018454606296.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Coupling Size | Plug OD | Pipe Size | Max. Pressure | Each | |
Anodized Aluminum | |||||
---|---|---|---|---|---|
1/2 | 15/16" | 1/2 | 250 psi @ 72° F | 00000000 | 000000 |
3/4 | 1 1/4" | 1/2 | 250 psi @ 72° F | 00000000 | 00000 |
3/4 | 1 1/4" | 3/4 | 250 psi @ 72° F | 00000000 | 00000 |
1 | 1 7/16" | 1 | 250 psi @ 72° F | 00000000 | 00000 |
1 1/4 | 1 13/16" | 1 1/4 | 250 psi @ 72° F | 00000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2 | 250 psi @ 72° F | 00000000 | 00000 |
2 | 2 1/2" | 2 | 250 psi @ 72° F | 00000000 | 00000 |
3 | 3 5/8" | 3 | 200 psi @ 72° F | 00000000 | 00000 |
4 | 4 3/4" | 4 | 150 psi @ 72° F | 00000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t62_8e86174b-4ac0-4dde-991c-182cdfd4f83d@halfx_638114489358190891.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Coupling Size | Plug OD | For Hose ID | Max. Pressure | Each | |
Anodized Aluminum | |||||
---|---|---|---|---|---|
1/2 | 1" | 1/2" | 250 psi @ 72° F | 00000000 | 000000 |
3/4 | 1 1/4" | 1/2" | 250 psi @ 72° F | 00000000 | 00000 |
3/4 | 1 1/4" | 3/4" | 250 psi @ 72° F | 0000000 | 00000 |
1 | 1 7/16" | 1" | 250 psi @ 72° F | 0000000 | 00000 |
1 1/4 | 1 13/16" | 1 1/4" | 250 psi @ 72° F | 0000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2" | 250 psi @ 72° F | 0000000 | 00000 |
2 | 2 1/2" | 1 1/2" | 250 psi @ 72° F | 00000000 | 00000 |
2 | 2 1/2" | 2" | 250 psi @ 72° F | 0000000 | 00000 |
2 1/2 | 3" | 2 1/2" | 200 psi @ 72° F | 0000000 | 00000 |
3 | 3 5/8" | 2" | 200 psi @ 72° F | 00000000 | 00000 |
3 | 3 5/8" | 3" | 200 psi @ 72° F | 0000000 | 00000 |
4 | 4 3/4" | 3" | 150 psi @ 72° F | 00000000 | 000000 |
4 | 4 3/4" | 4" | 150 psi @ 72° F | 0000000 | 00000 |
5 | 5 3/4" | 5" | 75 psi @ 72° F | 00000000 | 000000 |
6 | 6 15/16" | 6" | 75 psi @ 72° F | 0000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t125p1-c01h-digital@halfx_637085701914081853.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: ASME B16.5, Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Bolt Holes | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Plug OD | Pipe Size | Flange OD | Flanged Connection Surface | Pressure Class | Max. Pressure | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Each | |
Anodized Aluminum | ||||||||||||
2 | 2 1/2" | 2 | 6" | Flat | 150 | 250 psi @ 72° F | 5/8" | 3/4" | 4 | 4 3/4" | 00000000 | 0000000 |
3 | 3 5/8" | 3 | 7 1/2" | Flat | 150 | 200 psi @ 72° F | 5/8" | 3/4" | 4 | 6" | 00000000 | 000000 |
4 | 4 3/4" | 4 | 9" | Flat | 150 | 150 psi @ 72° F | 5/8" | 3/4" | 8 | 7 1/2" | 00000000 | 000000 |
6 | 6 15/16" | 6 | 11" | Flat | 150 | 75 psi @ 72° F | 3/4" | 7/8" | 8 | 9 1/2" | 00000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t111p1-c01h-digitall@halfx_637085688799882489.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t112c1-c01h-digital-master1572989812-p9@halfx_637085692269617671.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t92c1-c01h-digital-master1572989814-p9@halfx_637085749413933851.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Sockets | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | 300 Series Stainless Steel Replacement Levers | |||||||||||
Coupling Size | Socket ID | Pipe Size | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Anodized Aluminum | |||||||||||||
1 | 1 7/16" | 1 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 00000 | 00000000 | 000000 |
1 1/4 | 1 13/16" | 1 1/4 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
2 | 2 1/2" | 2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
2 1/2 | 3" | 2 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
3 | 3 5/8" | 3 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 4 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t172c1-c01h-digital-master1572989812-p9@halfx_637085702611967068.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Sockets | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | 300 Series Stainless Steel Replacement Levers | |||||||||||
Coupling Size | Socket ID | Pipe Size | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Anodized Aluminum | |||||||||||||
1 | 1 7/16" | 1 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 00000000 | 000000 |
1 1/4 | 1 13/16" | 1 1/4 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
2 | 2 1/2" | 2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
2 1/2 | 3" | 2 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
3 | 3 5/8" | 3 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 4 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
5 | 5 3/4" | 5 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 75 psi @ 72° F | 00000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t2c1-c01h-digital-master1572989813-p9@halfx_637085688303702622.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Sockets | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | 300 Series Stainless Steel Replacement Levers | |||||||||||
Coupling Size | Socket ID | For Hose ID | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Anodized Aluminum | |||||||||||||
1 | 1 7/16" | 1" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 000000 | 000000 | 10 | 0000000 | 00000 | 00000000 | 000000 |
1 1/4 | 1 13/16" | 1 1/4" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
2 | 2 1/2" | 2" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
2 1/2 | 3" | 2 1/2" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
3 | 3 5/8" | 3" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 4" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
5 | 5 3/4" | 5" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 75 psi @ 72° F | 000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t182c2-c01h-digital-master1572989813-p9@halfx_637085769529298257.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Caps | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | 300 Series Stainless Steel Replacement Levers | ||||||||||
Coupling Size | Socket ID | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Anodized Aluminum | ||||||||||||
1 | 1 7/16" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 00000000 | 000000 |
1 1/4 | 1 13/16" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
1 1/2 | 2 1/8" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
2 | 2 1/2" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
2 1/2 | 3" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 00000000 | 00000 |
3 | 3 5/8" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
5 | 5 3/4" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 75 psi @ 72° F | 00000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t12p1-c01h-digitall@halfx_637085695011968170.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Sockets | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | Replacement Levers | |||||||||||
Coupling Size | Socket ID | Pipe Size | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Anodized Aluminum | |||||||||||||
3/4 | 15/16" | 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
3/4 | 1 1/4" | 3/4 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 | 1 7/16" | 1 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 | 1 7/16" | 2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/4 | 1 13/16" | 1 1/4 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 1 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 1 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 1/2 | 3" | 2 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
3 | 3 5/8" | 2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
3 | 3 5/8" | 3 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 3 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 4 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
6 | 6 15/16" | 6 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 75 psi @ 72° F | 0000000 | 000000 | 5 | 0000000 | 00000 | 000000 | 00 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/876/8769n125polished-steelpositive_front_positive_right_flop15_1611335344_671@halfx_637469108687168985.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Levers | ||||||||
---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | Pipe Size | No. of | Material | Pull Ring Material | Max. Pressure | Each | |
Anodized Aluminum | ||||||||
1/2 | 15/16" | 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 000000 |
3/4 | 1 1/4" | 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 |
3/4 | 1 1/4" | 3/4 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 |
1 | 1 7/16" | 1 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 |
1 1/4 | 1 13/16" | 1 1/4 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 |
2 | 2 1/2" | 2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 |
2 1/2 | 3" | 2 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 |
3 | 3 5/8" | 3 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 |
4 | 4 3/4" | 4 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t22p1-c01h-digitall@halfx_637085718044492934.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Sockets | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | Replacement Levers | |||||||||||
Coupling Size | Socket ID | Pipe Size | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Anodized Aluminum | |||||||||||||
1/2 | 15/16" | 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
3/4 | 1 1/4" | 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
3/4 | 1 1/4" | 3/4 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 | 1 7/16" | 1 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/4 | 1 13/16" | 1 1/4 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 1 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 1 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 1 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 1/2 | 3" | 2 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
3 | 3 5/8" | 2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
3 | 3 5/8" | 3 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 3 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 4 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
5 | 5 3/4" | 5 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 75 psi @ 72° F | 00000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
6 | 6 15/16" | 6 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 75 psi @ 72° F | 0000000 | 000000 | 5 | 0000000 | 00000 | 000000 | 00 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/876/8769n137polished-steelpositive_front_positive_right_flop15_1611338668_362@halfx_637469141841493629.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Levers | ||||||||
---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | Pipe Size | No. of | Material | Pull Ring Material | Max. Pressure | Each | |
Anodized Aluminum | ||||||||
1/2 | 15/16" | 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 000000 |
3/4 | 1 1/4" | 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 |
3/4 | 1 1/4" | 3/4 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 |
1 | 1 7/16" | 1 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 |
2 | 2 1/2" | 2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 |
3 | 3 5/8" | 3 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 |
4 | 4 3/4" | 4 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 |
6 | 6 15/16" | 6 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 75 psi @ 72° F | 00000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t32p1-c01h-digitall@halfx_637085707189162466.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Sockets | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | Replacement Levers | |||||||||||
Coupling Size | Socket ID | For Hose ID | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Anodized Aluminum | |||||||||||||
1/2 | 15/16" | 1/2" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
3/4 | 1 1/4" | 1/2" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
3/4 | 1 1/4" | 3/4" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 | 1 7/16" | 1" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/4 | 1 13/16" | 1 1/4" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 1" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 2" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 1 1/2" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 2" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 1/2 | 3" | 2 1/2" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
3 | 3 5/8" | 2" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
3 | 3 5/8" | 3" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 3" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 4" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
5 | 5 3/4" | 5" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 75 psi @ 72° F | 00000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
6 | 6 15/16" | 6" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 75 psi @ 72° F | 0000000 | 000000 | 5 | 0000000 | 00000 | 000000 | 00 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t712p1-c01h-digitall@halfx_637085714273473997.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Sockets | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | Replacement Levers | |||||||||||
Coupling Size | Socket ID | Pipe Size | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Anodized Aluminum | |||||||||||||
1 | 1 7/16" | 1 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 2 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
3 | 3 5/8" | 3 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 4 | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t912p1-c01h-digitall@halfx_637085727438766292.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Sockets | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | Replacement Levers | |||||||||||
Coupling Size | Socket ID | For Hose ID | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Anodized Aluminum | |||||||||||||
1 | 1 7/16" | 1" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 2" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
3 | 3 5/8" | 3" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 4" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t812p1-c01h-digitall@halfx_637085738878689759.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Connectors | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | Replacement Levers | ||||||||||
Coupling Size | Socket ID | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Anodized Aluminum | ||||||||||||
1 | 1 7/16" | 4 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 4 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 4 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
3 | 3 5/8" | 4 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 4 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t161c1-c01h-digital@halfx_637085768456029686.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Coupling Size | Socket ID | Levers | |||||||
---|---|---|---|---|---|---|---|---|---|
(A) | (B) | (A) | (B) | No. of | Material | Pull Ring Material | Max. Pressure | Each | |
Anodized Aluminum | |||||||||
3 | 2 | 3 5/8" | 2 1/2" | 4 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 0000000 |
4 | 3 | 4 3/4" | 3 5/8" | 4 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 |
316 Stainless Steel Replacement Levers for 2 Coupling Size Sockets | 000000000 | Each | 000000 |
Protective Plug for 3 Coupling Size Sockets | 00000000 | Each | 00000 |
Protective Plug for 2 Coupling Size Sockets | 00000000 | Each | 00000 |
316 Stainless Steel Replacement Levers for 3 and 4 Coupling Size Sockets | 000000000 | Each | 00000 |
Protective Plug for 4 Coupling Size Sockets | 00000000 | Each | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t211c1-c01h-digital-master1572989814-p9@halfx_637085727633439946.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Reducing Adapters | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Levers | Replacement Gaskets | ||||||||||
(A) | (B) | Plug OD | Socket ID | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | ||
Anodized Aluminum | ||||||||||||
1 1/2 | 1 | 2 1/8" | 1 7/16" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 |
2 | 1 1/2 | 2 1/2" | 2 1/8" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 |
2 | 3 | 2 1/2" | 3 5/8" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 |
3 | 2 | 3 5/8" | 2 1/2" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 |
3 | 4 | 3 5/8" | 4 3/4" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 |
4 | 3 | 4 3/4" | 3 5/8" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 |
316 Stainless Steel Replacement Lever for 2 Coupling Size Sockets | 000000000 | Each | 000000 |
Protective Plug for 2 Coupling Size Sockets | 00000000 | Each | 00000 |
316 Stainless Steel Replacement Lever for 3 and 4 Coupling Size Sockets | 000000000 | Each | 00000 |
316 Stainless Steel Replacement Lever for 1 Coupling Size Sockets | 000000000 | Each | 0000 |
316 Stainless Steel Replacement Lever for 1 1/2 Coupling Size Sockets | 000000000 | Each | 00000 |
Protective Plug for 4 Coupling Size Sockets | 00000000 | Each | 00000 |
Protective Plug for 3 Coupling Size Sockets | 00000000 | Each | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/208/2084t82p2-c01h-digitall@halfx_637085701266295880.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Caps | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | Replacement Levers | ||||||||||
Coupling Size | Socket ID | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Anodized Aluminum | ||||||||||||
1/2 | 15/16" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
3/4 | 1 1/4" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 | 1 7/16" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/4 | 1 13/16" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 1/2 | 3" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
3 | 3 5/8" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 150 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
5 | 5 3/4" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 75 psi @ 72° F | 00000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
6 | 6 15/16" | 2 | 316 Stainless Steel | Zinc-Plated Steel | 75 psi @ 72° F | 0000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
Metal Cam-and-Groove Hose Couplings with Shut-Off Valve for Water
![](/prerenderstable/mvPRE/contents/gfx/imagecache/560/5605k71-k74c1-c01h-digital-master1572990303-p9@halfx_637085677175702106.png?ver=imagenotfound)
Also known as dry disconnects and double shut-off couplings, these have a shut-off valve in the plug and the socket for minimal fluid loss when disconnecting the hose line. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket, press the locking levers down, and turn the handle to the open position. The locking levers prevent accidental disconnection. To disconnect, turn the handle on the socket to the closed position, lift both locking levers, and pull out the plug. The plug and socket cannot be disconnected when the valves are open. They are not compatible with any other style of coupling. Plugs and sockets are aluminum, which is lightweight with good corrosion resistance.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/560/5605k74p1-c01h-digitall@halfx_637085728996047152.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
Sockets | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | 300 Series Stainless Steel Replacement Levers | ||||||||||||
Coupling Size | Socket ID | Pipe Size | Thread Type | No. of | Material | Valve Type | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Aluminum | ||||||||||||||
2 | 2 1/2" | 1 1/2 | NPT | 2 | 304 Stainless Steel | Check | 200 psi @ 72° F | 0000000 | 0000000 | 10 | 0000000 | 00000 | 00000000 | 00000 |
2 1/2 | 3" | 2 | NPT | 2 | 304 Stainless Steel | Check | 150 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 0000 | 00000000 | 0000 |
4 | 4 3/4" | 3 | NPT | 2 | 304 Stainless Steel | Check | 125 psi @ 72° F | 0000000 | 00000000 | 10 | 0000000 | 00000 | 00000000 | 0000 |
Metal Cam-and-Groove Hose Couplings for Chemicals and Petroleum
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k12-53015k42c1-c01h-digital-master1572989902-p9@halfx_637085756396179244.png?ver=imagenotfound)
Made of metal, these couplings have better durability than plastic cam-and-groove couplings. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug. Couplings are compatible with Andrews, Dixon, Ever-Tite, and PT cam-and-groove couplings.
Plugs and sockets with swivel are also known as live swivels. They rotate 360° before and after installation and can swivel continuously. Use them to prevent hose kinking.
Plugs with male threaded end are also known as F adapters.
Plugs with female threaded end are also known as A adapters.
Plugs with barbed end are also known as E adapters. Insert the barbed end into plastic or rubber hose and secure with a clamp.
Plugs with flanged end are also known as PFA adapters. Bolt the flanged end to another same-size flange with a gasket (sold separately).
Plugs with butt-weld end are also known as AWB adapters. They have a beveled end that forms a trough for welding, creating a strong, permanent connection.
Plugs with socket-connect end are also known as AWS adapters. They are easier to weld than butt-weld fittings because the fitting doesn’t need to align perfectly to the pipe. Slide pipe into the socket and weld for a strong, permanent connection.
Plug connectors and reducers are also known as SA spool adapters.
Sockets with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.
Sockets with male threaded end are also known as B couplers.
Straight sockets with female threaded end are also known as D couplers.
Straight sockets with barbed end are also known as C couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.
Sockets with flanged end are also known as PFC couplers. Bolt the flanged end to another same-size flange with a gasket (sold separately).
Sockets with butt-weld end are also known as DWB couplers. They have a beveled end that forms a trough for welding, creating a strong, permanent connection.
Sockets with socket-connect end are also known as DWS couplers. They are easier to weld than butt-weld fittings because the fitting doesn’t need to align perfectly to the pipe. Slide pipe into the socket and weld for a strong, permanent connection.
90° elbow sockets with female threaded end are also known as LD couplers.
90° elbow sockets with barbed end are also known as CL couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.
Socket connectors and reducers are also known as C x C couplers.
Plug-to-socket reducing adapters are also known as A x C couplers.
Aluminum plugs and sockets are lighter in weight than 316 stainless steel plugs and sockets. They have good corrosion resistance.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k42p2-c01h-digitall@halfx_636628486200000000.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326
Coupling Size | Plug OD | Pipe Size | Dash Size | Max. Pressure | Each | |
Aluminum | ||||||
---|---|---|---|---|---|---|
1/2 | 15/16" | 1/2 | 08 | 250 psi @ 72° F | 000000000 | 00000 |
3/4 | 1 1/4" | 1/2 | 08 | 250 psi @ 72° F | 000000000 | 00000 |
3/4 | 1 1/4" | 3/4 | 12 | 250 psi @ 72° F | 00000000 | 0000 |
3/4 | 1 1/4" | 1 | 16 | 250 psi @ 72° F | 000000000 | 00000 |
1 | 1 7/16" | 1 | 16 | 250 psi @ 72° F | 00000000 | 0000 |
1 | 1 7/16" | 1 1/2 | 24 | 250 psi @ 72° F | 000000000 | 00000 |
1 | 1 7/16" | 2 | 32 | 250 psi @ 72° F | 000000000 | 00000 |
1 1/4 | 1 13/16" | 1 1/4 | 20 | 250 psi @ 72° F | 00000000 | 00000 |
1 1/2 | 2 1/8" | 1 | 16 | 250 psi @ 72° F | 000000000 | 000000 |
1 1/2 | 2 1/8" | 1 1/2 | 24 | 250 psi @ 72° F | 00000000 | 00000 |
1 1/2 | 2 1/8" | 2 | 32 | 250 psi @ 72° F | 00000000 | 00000 |
2 | 2 1/2" | 1 | 16 | 250 psi @ 72° F | 000000000 | 00000 |
2 | 2 1/2" | 1 1/2 | 24 | 250 psi @ 72° F | 00000000 | 00000 |
2 | 2 1/2" | 2 | 32 | 250 psi @ 72° F | 00000000 | 00000 |
2 | 2 1/2" | 3 | 48 | 250 psi @ 72° F | 00000000 | 00000 |
2 1/2 | 3" | 2 1/2 | 40 | 200 psi @ 72° F | 00000000 | 00000 |
3 | 3 5/8" | 1 1/2 | 24 | 200 psi @ 72° F | 000000000 | 00000 |
3 | 3 5/8" | 2 | 32 | 200 psi @ 72° F | 00000000 | 00000 |
3 | 3 5/8" | 3 | 48 | 200 psi @ 72° F | 00000000 | 00000 |
3 | 3 5/8" | 4 | 64 | 200 psi @ 72° F | 00000000 | 00000 |
4 | 4 3/4" | 2 | 32 | 150 psi @ 72° F | 000000000 | 00000 |
4 | 4 3/4" | 3 | 48 | 150 psi @ 72° F | 00000000 | 00000 |
4 | 4 3/4" | 4 | 64 | 150 psi @ 72° F | 00000000 | 00000 |
5 | 5 3/4" | 5 | __ | 75 psi @ 72° F | 000000000 | 000000 |
6 | 6 15/16" | 6 | 96 | 75 psi @ 72° F | 00000000 | 000000 |
8 | 8 7/8" | 8 | __ | 50 psi @ 72° F | 000000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/514/51415k989p1-c01h-digitall@halfx_637085655722295693.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k42p2-c01h-digitall@halfx_636628486200000000.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Coupling Size | Plug OD | Pipe Size | Dash Size | Max. Pressure | Each | |
Aluminum | ||||||
---|---|---|---|---|---|---|
3/4 | 1 1/4" | 3/4 | 12 | 250 psi @ 72° F | 0000000 | 00000 |
1 | 1 7/16" | 1 | 16 | 250 psi @ 72° F | 0000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2 | 24 | 250 psi @ 72° F | 0000000 | 00000 |
2 | 2 1/2" | 2 | 32 | 250 psi @ 72° F | 0000000 | 00000 |
3 | 3 5/8" | 3 | 48 | 200 psi @ 72° F | 0000000 | 00000 |
4 | 4 3/4" | 4 | 64 | 150 psi @ 72° F | 000000000 | 00000 |
6 | 6 15/16" | 6 | 96 | 75 psi @ 72° F | 000000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k52p1-c01h-digitall@halfx_637085761727169273.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326
Coupling Size | Plug OD | Pipe Size | Dash Size | Max. Pressure | Each | |
Aluminum | ||||||
---|---|---|---|---|---|---|
1/2 | 15/16" | 1/2 | 08 | 250 psi @ 72° F | 000000000 | 00000 |
3/4 | 1 1/4" | 1/2 | 08 | 250 psi @ 72° F | 000000000 | 00000 |
3/4 | 1 1/4" | 3/4 | 12 | 250 psi @ 72° F | 00000000 | 0000 |
3/4 | 1 1/4" | 1 | 16 | 250 psi @ 72° F | 000000000 | 00000 |
1 | 1 7/16" | 1 | 16 | 250 psi @ 72° F | 00000000 | 0000 |
1 | 1 7/16" | 1 1/2 | 24 | 250 psi @ 72° F | 000000000 | 00000 |
1 1/4 | 1 13/16" | 1 1/4 | 20 | 250 psi @ 72° F | 00000000 | 00000 |
1 1/2 | 2 1/8" | 1 | 16 | 250 psi @ 72° F | 000000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2 | 24 | 250 psi @ 72° F | 00000000 | 00000 |
1 1/2 | 2 1/8" | 2 | 32 | 250 psi @ 72° F | 00000000 | 00000 |
2 | 2 1/2" | 1 1/2 | 24 | 250 psi @ 72° F | 00000000 | 00000 |
2 | 2 1/2" | 2 | 32 | 250 psi @ 72° F | 00000000 | 00000 |
2 | 2 1/2" | 3 | 48 | 250 psi @ 72° F | 00000000 | 00000 |
2 1/2 | 3" | 2 1/2 | 40 | 200 psi @ 72° F | 00000000 | 00000 |
3 | 3 5/8" | 1 | 16 | 200 psi @ 72° F | 000000000 | 000000 |
3 | 3 5/8" | 2 | 32 | 200 psi @ 72° F | 00000000 | 00000 |
3 | 3 5/8" | 3 | 48 | 200 psi @ 72° F | 00000000 | 00000 |
3 | 3 5/8" | 4 | 64 | 200 psi @ 72° F | 00000000 | 00000 |
4 | 4 3/4" | 3 | 48 | 150 psi @ 72° F | 00000000 | 00000 |
4 | 4 3/4" | 4 | 64 | 150 psi @ 72° F | 00000000 | 00000 |
5 | 5 3/4" | 5 | __ | 75 psi @ 72° F | 000000000 | 00000 |
6 | 6 15/16" | 6 | 96 | 75 psi @ 72° F | 00000000 | 000000 |
8 | 8 7/8" | 8 | __ | 50 psi @ 72° F | 000000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/514/51415k973p1-c01h-digitall@halfx_637085710585671457.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k52p1-c01h-digitall@halfx_637085761727169273.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Coupling Size | Plug OD | Pipe Size | Dash Size | Max. Pressure | Each | |
Aluminum | ||||||
---|---|---|---|---|---|---|
3/4 | 1 1/4" | 3/4 | 12 | 250 psi @ 72° F | 0000000 | 00000 |
1 | 1 7/16" | 1 | 16 | 250 psi @ 72° F | 0000000 | 0000 |
1 1/2 | 2 1/8" | 1 1/2 | 24 | 250 psi @ 72° F | 0000000 | 00000 |
2 | 2 1/2" | 2 | 32 | 250 psi @ 72° F | 0000000 | 00000 |
3 | 3 5/8" | 3 | 48 | 200 psi @ 72° F | 0000000 | 00000 |
2 1/2 | 3" | 2 1/2 | 40 | 200 psi @ 72° F | 000000000 | 00000 |
4 | 4 3/4" | 4 | 64 | 150 psi @ 72° F | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k62p1-c01h-digitall@halfx_637085654037121497.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326
Coupling Size | Plug OD | For Hose ID | Dash Size | Max. Pressure | Each | |
Aluminum | ||||||
---|---|---|---|---|---|---|
1/2 | 15/16" | 1/2" | 08 | 250 psi @ 72° F | 000000000 | 000000 |
3/4 | 1 1/4" | 1/2" | 08 | 250 psi @ 72° F | 000000000 | 0000 |
3/4 | 1 1/4" | 3/4" | 12 | 250 psi @ 72° F | 00000000 | 00000 |
1 | 1 7/16" | 3/4" | 12 | 250 psi @ 72° F | 00000000 | 00000 |
1 | 1 7/16" | 1" | 16 | 250 psi @ 72° F | 00000000 | 00000 |
1 1/4 | 1 13/16" | 1 1/4" | 20 | 250 psi @ 72° F | 00000000 | 00000 |
1 1/2 | 2 1/8" | 1" | 16 | 250 psi @ 72° F | 00000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2" | 24 | 250 psi @ 72° F | 00000000 | 00000 |
2 | 2 1/2" | 1" | 16 | 250 psi @ 72° F | 000000000 | 00000 |
2 | 2 1/2" | 1 1/2" | 24 | 250 psi @ 72° F | 00000000 | 00000 |
2 | 2 1/2" | 2" | 32 | 250 psi @ 72° F | 00000000 | 00000 |
2 1/2 | 3" | 2 1/2" | 40 | 200 psi @ 72° F | 00000000 | 00000 |
3 | 3 5/8" | 2" | 32 | 200 psi @ 72° F | 00000000 | 00000 |
3 | 3 5/8" | 3" | 48 | 200 psi @ 72° F | 00000000 | 00000 |
4 | 4 3/4" | 3" | 48 | 150 psi @ 72° F | 00000000 | 00000 |
4 | 4 3/4" | 4" | 64 | 150 psi @ 72° F | 00000000 | 00000 |
5 | 5 3/4" | 5" | __ | 75 psi @ 72° F | 000000000 | 00000 |
6 | 6 15/16" | 6" | 96 | 75 psi @ 72° F | 00000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k331p1-c01h-digitall@halfx_637085661509314907.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met:
Aluminum: ASME B16.24, Fed. Spec. A-A-59326
316 Stainless Steel: ASME B16.5, Fed. Spec. A-A-59326
Bolt Hole | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Plug OD | Pipe Size | Dash Size | Flange OD | Flanged Connection Surface | Pressure Class | Max. Pressure | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Each | |
Aluminum | |||||||||||||
2 | 2 1/2" | 2 | 32 | 6" | Flat | 150 | 250 psi @ 72° F | 5/8" | 3/4" | 4 | 4 3/4" | 000000000 | 0000000 |
3 | 3 5/8" | 3 | 48 | 7 1/2" | Flat | 150 | 200 psi @ 72° F | 5/8" | 3/4" | 4 | 6" | 000000000 | 000000 |
4 | 4 3/4" | 4 | 64 | 9" | Flat | 150 | 150 psi @ 72° F | 5/8" | 3/4" | 8 | 7 1/2" | 000000000 | 000000 |
6 | 6 15/16" | 6 | 96 | 11" | Flat | 150 | 75 psi @ 72° F | 3/4" | 7/8" | 8 | 9 1/2" | 000000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k339p1-c01h-digital@halfx_637084810186472546.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k344c1-c01h-digital-master1572989860-p9@halfx_637085661136216202.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k349p1-c01h-digital@halfx_637084812998459042.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k349c1-c01h-digital-master1572989860-p9@halfx_637085656849768148.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k321p1-c01h-digitall@halfx_637085764772057099.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
![](/prerenderstable/mvPRE/contents/gfx/imagecache/958/95805k171c1-c01h-digital-master1572903113-p9@halfx_637084799166366448.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k132c1-c01h-digital-master1572989859-p9@halfx_637085753148014871.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Brass Replacement Levers | 300 Series Stainless Steel Replacement Levers | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | Pipe Size | Dash Size | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | Each | ||||
Aluminum with Brass Levers | |||||||||||||||
1 | 1 7/16" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
1 1/4 | 1 13/16" | 1 1/4 | 20 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 000000 | 000000 | 00 |
1 1/2 | 2 1/8" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
2 | 2 1/2" | 2 | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
2 1/2 | 3" | 2 1/2 | 40 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
3 | 3 5/8" | 3 | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
4 | 4 3/4" | 4 | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
Aluminum with 316 Stainless Steel Levers | |||||||||||||||
1 | 1 7/16" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 000000 |
1 1/4 | 1 13/16" | 1 1/4 | 20 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
2 | 2 1/2" | 2 | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
2 1/2 | 3" | 2 1/2 | 40 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
3 | 3 5/8" | 3 | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
4 | 4 3/4" | 4 | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k172c1-c01h-digital-master1572989861-p9@halfx_637085663372296097.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Brass Replacement Levers | 300 Series Stainless Steel Replacement Levers | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | Pipe Size | Dash Size | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | Each | ||||
Aluminum with Brass Levers | |||||||||||||||
1 | 1 7/16" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
1 1/4 | 1 13/16" | 1 1/4 | 20 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 000000 | 000000 | 00 |
1 1/2 | 2 1/8" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
2 | 2 1/2" | 2 | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
2 1/2 | 3" | 2 1/2 | 40 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
3 | 3 5/8" | 3 | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
4 | 4 3/4" | 4 | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
Aluminum with 316 Stainless Steel Levers | |||||||||||||||
1 | 1 7/16" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 000000 |
1 1/4 | 1 13/16" | 1 1/4 | 20 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
2 | 2 1/2" | 2 | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
2 1/2 | 3" | 2 1/2 | 40 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
3 | 3 5/8" | 3 | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
4 | 4 3/4" | 4 | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
5 | 5 3/4" | 5 | __ | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 0000000 | 000000 | 5 | 0000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k162c1-c01h-digital-master1572989861-p9@halfx_637085711020223921.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Brass Replacement Levers | 300 Series Stainless Steel Replacement Levers | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | For Hose ID | Dash Size | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | Each | ||||
Aluminum with Brass Levers | |||||||||||||||
1 | 1 7/16" | 1" | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
1 1/4 | 1 13/16" | 1 1/4" | 20 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 000000 | 000000 | 00 |
1 1/2 | 2 1/8" | 1 1/2" | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
2 | 2 1/2" | 2" | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
2 1/2 | 3" | 2 1/2" | 40 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
3 | 3 5/8" | 3" | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
4 | 4 3/4" | 4" | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
5 | 5 3/4" | 5" | __ | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 000000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
Aluminum with 316 Stainless Steel Levers | |||||||||||||||
1 | 1 7/16" | 1" | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 000000 |
1 1/4 | 1 13/16" | 1 1/4" | 20 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2" | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
2 | 2 1/2" | 2" | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
2 1/2 | 3" | 2 1/2" | 40 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
3 | 3 5/8" | 3" | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
4 | 4 3/4" | 4" | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 000000 | 000000 | 10 | 0000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
5 | 5 3/4" | 5" | __ | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 000000 | 000000 | 5 | 0000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k183c2-c01h-digital-master1572989860-p9@halfx_637085660504610046.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Brass Replacement Levers | 300 Series Stainless Steel Replacement Levers | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | Each | ||||
Aluminum with Brass Levers | |||||||||||||
1 | 1 7/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 000000 | 000000 | 00 |
1 1/4 | 1 13/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
1 1/2 | 2 1/8" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
2 | 2 1/2" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
2 1/2 | 3" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 | 000000 | 00 |
3 | 3 5/8" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
4 | 4 3/4" | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
5 | 5 3/4" | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 000000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 | 000000 | 00 |
Aluminum with 316 Stainless Steel Levers | |||||||||||||
1 | 1 7/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 000000 |
1 1/4 | 1 13/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
1 1/2 | 2 1/8" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
2 | 2 1/2" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
2 1/2 | 3" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 | 00000000 | 00000 |
3 | 3 5/8" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
4 | 4 3/4" | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
5 | 5 3/4" | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 0000000 | 000000 | 5 | 0000000 | 00000 | 000000 | 00 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k12p1-c01h-digitall@halfx_637085735189030817.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Replacement Levers | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | Pipe Size | Dash Size | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Aluminum with Brass Levers | |||||||||||||
1/2 | 15/16" | 1/2 | 08 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
3/4 | 1 1/4" | 1/2 | 08 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
3/4 | 1 1/4" | 3/4 | 12 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 | 1 7/16" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 | 1 7/16" | 2 | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/4 | 1 13/16" | 1 1/4 | 20 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/2 | 2 1/8" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/2 | 2 1/8" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
2 | 2 1/2" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 |
2 | 2 1/2" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 |
2 | 2 1/2" | 2 | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 |
2 1/2 | 3" | 2 1/2 | 40 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 |
3 | 3 5/8" | 2 | 32 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
3 | 3 5/8" | 3 | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
4 | 4 3/4" | 2 | 32 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
4 | 4 3/4" | 3 | 48 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
4 | 4 3/4" | 4 | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
5 | 5 3/4" | 5 | __ | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 000000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 0000 |
6 | 6 15/16" | 6 | 96 | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 00000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
8 | 8 7/8" | 8 | __ | 4 | Zinc-Plated Steel | 50 psi @ 72° F | 000000000 | 000000 | 1 | 0000000 | 00000 | 000000000 | 00000 |
Aluminum with 316 Stainless Steel Levers | |||||||||||||
1/2 | 15/16" | 1/2 | 08 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
3/4 | 1 1/4" | 3/4 | 12 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 | 1 7/16" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/4 | 1 13/16" | 1 1/4 | 20 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 2 | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 1/2 | 3" | 2 1/2 | 40 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
3 | 3 5/8" | 2 | 32 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
3 | 3 5/8" | 3 | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 4 | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
6 | 6 15/16" | 6 | 96 | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 0000000 | 000000 | 5 | 0000000 | 00000 | 000000 | 00 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k12p1-c01h-digitall@halfx_637085735189030817.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Replacement Levers | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | Pipe Size | Dash Size | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Aluminum with 316 Stainless Steel Levers | |||||||||||||
3/4 | 1 1/4" | 3/4 | 12 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
1 | 1 7/16" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/2 | 2 1/8" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 2 | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
3 | 3 5/8" | 3 | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k22p1-c01h-digitall@halfx_637085763761898631.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Replacement Levers | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | Pipe Size | Dash Size | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Aluminum with Brass Levers | |||||||||||||
1/2 | 15/16" | 1/2 | 08 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
3/4 | 1 1/4" | 1/2 | 08 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
3/4 | 1 1/4" | 3/4 | 12 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 | 1 7/16" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/4 | 1 13/16" | 1 1/4 | 20 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/2 | 2 1/8" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/2 | 2 1/8" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
2 | 2 1/2" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 0000 | 000000 | 00 |
2 | 2 1/2" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 |
2 | 2 1/2" | 2 | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 |
2 1/2 | 3" | 2 1/2 | 40 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 |
3 | 3 5/8" | 2 | 32 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
3 | 3 5/8" | 3 | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
4 | 4 3/4" | 3 | 48 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
4 | 4 3/4" | 4 | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
5 | 5 3/4" | 5 | __ | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 000000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 0000 |
6 | 6 15/16" | 6 | 96 | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 00000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
8 | 8 7/8" | 8 | __ | 4 | Zinc-Plated Steel | 50 psi @ 72° F | 000000000 | 000000 | 1 | 0000000 | 00000 | 000000000 | 00000 |
Aluminum with 316 Stainless Steel Levers | |||||||||||||
1/2 | 15/16" | 1/2 | 08 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
3/4 | 1 1/4" | 3/4 | 12 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 | 1 7/16" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/4 | 1 13/16" | 1 1/4 | 20 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 2 | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 1/2 | 3" | 2 1/2 | 40 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
3 | 3 5/8" | 2 | 32 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
3 | 3 5/8" | 3 | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 3 | 48 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 4 | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
6 | 6 15/16" | 6 | 96 | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 0000000 | 000000 | 5 | 0000000 | 00000 | 000000 | 00 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/514/51415k983p1-c01h-digital@halfx_637205605167691549.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Replacement Levers | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | Pipe Size | Dash Size | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Aluminum with Brass Levers | |||||||||||||
1 1/2 | 2 1/8" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 0000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
2 | 2 1/2" | 2 | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 0000 | 000000 | 00 |
3 | 3 5/8" | 3 | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k22p1-c01h-digitall@halfx_637085763761898631.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Replacement Levers | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | Pipe Size | Dash Size | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Aluminum with 316 Stainless Steel Levers | |||||||||||||
3/4 | 1 1/4" | 3/4 | 12 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
1 | 1 7/16" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/2 | 2 1/8" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 2 | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
3 | 3 5/8" | 3 | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/200/2005t32p1-c01h-digitall@halfx_637085670504226130.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Replacement Levers | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | For Hose ID | Dash Size | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Aluminum with Brass Levers | |||||||||||||
1/2 | 15/16" | 1/2" | 08 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
3/4 | 1 1/4" | 1/2" | 08 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
3/4 | 1 1/4" | 3/4" | 12 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 | 1 7/16" | 3/4" | 12 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 | 1 7/16" | 1" | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/4 | 1 13/16" | 1 1/4" | 20 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/2 | 2 1/8" | 1" | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/2 | 2 1/8" | 1 1/2" | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/2 | 2 1/8" | 2" | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
2 | 2 1/2" | 1 1/2" | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 |
2 | 2 1/2" | 2" | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 |
2 1/2 | 3" | 2 1/2" | 40 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 |
3 | 3 5/8" | 2" | 32 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
3 | 3 5/8" | 3" | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
4 | 4 3/4" | 3" | 48 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
4 | 4 3/4" | 4" | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
5 | 5 3/4" | 5" | __ | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 000000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 0000 |
6 | 6 15/16" | 6" | 96 | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 00000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
8 | 8 7/8" | 8" | __ | 4 | Zinc-Plated Steel | 50 psi @ 72° F | 000000000 | 000000 | 1 | 0000000 | 00000 | 000000000 | 00000 |
Aluminum with 316 Stainless Steel Levers | |||||||||||||
1/2 | 15/16" | 1/2" | 08 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
3/4 | 1 1/4" | 3/4" | 12 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 | 1 7/16" | 1" | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/4 | 1 13/16" | 1 1/4" | 20 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 1" | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2" | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 1 1/2" | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 2" | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 1/2 | 3" | 2 1/2" | 40 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
3 | 3 5/8" | 2" | 32 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
3 | 3 5/8" | 3" | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 3" | 48 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 4" | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
5 | 5 3/4" | 5" | __ | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 0000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
6 | 6 15/16" | 6" | 96 | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 0000000 | 000000 | 5 | 0000000 | 00000 | 000000 | 00 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/514/51415k979p1-c01h-digitall@halfx_637085752648674817.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Replacement Levers | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | For Hose ID | Dash Size | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Aluminum with Brass Levers | |||||||||||||
1 1/2 | 2 1/8" | 1 1/2" | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 0000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
2 | 2 1/2" | 2" | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 0000 | 000000 | 00 |
3 | 3 5/8" | 3" | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k335p1-c01h-digitall@halfx_637085662751678988.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met:
Aluminum: ASME B16.24, Fed. Spec. A-A-59326
316 Stainless Steel: ASME B16.5, Fed. Spec. A-A-59326
Sockets | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bolt Hole | Replacement Gaskets | Replacement Levers | ||||||||||||||||
Coupling Size | Socket ID | Pipe Size | Dash Size | Flange OD | Pressure Class | No. of Levers | Max. Pressure | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Each | Pkg. Qty. | Pkg. | Each | |||
Aluminum with Brass Levers and Zinc-Plated Steel Pull Rings | ||||||||||||||||||
Flat Flanged Connection Surface | ||||||||||||||||||
2 | 2 1/2" | 2 | 32 | 6" | 150 | 2 | 250 psi @ 72° F | 5/8" | 3/4" | 4 | 4 3/4" | 000000000 | 0000000 | 10 | 0000000 | 00000 | 000000 | 00 |
3 | 3 5/8" | 3 | 48 | 7 1/2" | 150 | 2 | 200 psi @ 72° F | 5/8" | 3/4" | 4 | 6" | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 4 | 64 | 9" | 150 | 2 | 150 psi @ 72° F | 5/8" | 3/4" | 8 | 7 1/2" | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
6 | 6 15/16" | 6 | 96 | 11" | 150 | 2 | 75 psi @ 72° F | 3/4" | 7/8" | 8 | 9 1/2" | 000000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k344p1-c01h-digital@halfx_637084810868379466.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k344c1-c01h-digital-master1572989860-p9@halfx_637085661136216202.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Replacement Levers | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | Pipe Size | Dash Size | Wall Thick. | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Aluminum with Brass Levers | ||||||||||||||
2 | 2 1/2" | 2 | 32 | 0.15" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000 | 00 |
3 | 3 5/8" | 3 | 48 | 0.22" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 4 | 64 | 0.24" | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k357p1-c01h-digital@halfx_637084822079696654.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k357c1-c01h-digital-master1572989860-p9@halfx_637085656654751202.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Replacement Levers | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | Pipe Size | Dash Size | Socket Dp. | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Aluminum with Brass Levers | ||||||||||||||
2 | 2 1/2" | 2 | 32 | 11/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000 | 00 |
3 | 3 5/8" | 3 | 48 | 11/16" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 4 | 64 | 11/16" | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
6 | 6 15/16" | 6 | 96 | 7/8" | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 000000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/679/6795k22p1-c01h-digitall@halfx_637085820471597819.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Replacement Levers | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Aluminum with Brass Levers | |||||||||||
1 | 1 7/16" | 4 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 4 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
2 | 2 1/2" | 4 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
3 | 3 5/8" | 4 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
4 | 4 3/4" | 4 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000 | 00 |
Aluminum with 316 Stainless Steel Levers | |||||||||||
1 | 1 7/16" | 4 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/2 | 2 1/8" | 4 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 4 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
3 | 3 5/8" | 4 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 4 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/679/6795k191c1-c01h-digital-master1572990342-p9@halfx_637085817045262910.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Coupling Size | Socket ID | |||||||
---|---|---|---|---|---|---|---|---|
(A) | (B) | (A) | (B) | No. of Levers | Pull Ring Material | Max. Pressure | Each | |
Aluminum with Brass Levers | ||||||||
3 | 2 | 3 5/8" | 2 1/2" | 4 | Zinc-Plated Steel | 200 psi @ 72° F | 000000000 | 0000000 |
4 | 3 | 4 3/4" | 3 5/8" | 4 | Zinc-Plated Steel | 150 psi @ 72° F | 000000000 | 000000 |
Aluminum with 316 Stainless Steel Levers | ||||||||
3 | 2 | 3 5/8" | 2 1/2" | 4 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 000000 |
4 | 3 | 4 3/4" | 3 5/8" | 4 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 |
Brass Replacement Lever for 2 Coupling Size Sockets | 000000000 | Each | 00000 |
Brass Replacement Lever for 3 and 4 Coupling Size Sockets | 000000000 | Each | 0000 |
Replacement Gasket for 2 Coupling Size Sockets (10/Pkg.) | 0000000 | Pkg. | 0000 |
Replacement Gasket for 3 Coupling Size Sockets (10/Pkg.) | 0000000 | Pkg. | 00000 |
Replacement Gasket for 4 Coupling Size Sockets (10/Pkg.) | 0000000 | Pkg. | 00000 |
316 Stainless Steel Replacement Lever for 3 and 4 Coupling Size Sockets | 000000000 | Each | 00000 |
316 Stainless Steel Replacement Lever for 2 Coupling Size Sockets | 000000000 | Each | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k311c1-c01h-digital-master1572989860-p9@halfx_637085657034150119.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Reducing Adapters | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Replacement Gaskets | ||||||||||
(A) | (B) | Plug OD (A) | Socket ID (B) | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | ||
Aluminum with Brass Levers | |||||||||||
1 1/2 | 1 | 2 1/8" | 1 7/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 |
2 | 1 1/2 | 2 1/2" | 2 1/8" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 0000 |
2 | 3 | 2 1/2" | 3 5/8" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 |
3 | 2 | 3 5/8" | 2 1/2" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 |
3 | 4 | 3 5/8" | 4 3/4" | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 |
4 | 3 | 4 3/4" | 3 5/8" | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 |
Aluminum with 316 Stainless Steel Levers | |||||||||||
1 1/2 | 1 | 2 1/8" | 1 7/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 |
2 | 1 1/2 | 2 1/2" | 2 1/8" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 |
2 | 3 | 2 1/2" | 3 5/8" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 |
3 | 2 | 3 5/8" | 2 1/2" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 |
3 | 4 | 3 5/8" | 4 3/4" | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 |
4 | 3 | 4 3/4" | 3 5/8" | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 |
Brass Replacement Lever for 1 1/2 Coupling Size Sockets | 000000000 | Each | 00000 |
Brass Replacement Lever for 2 Coupling Size Sockets | 000000000 | Each | 0000 |
Brass Replacement Lever for 3 and 4 Coupling Size Sockets | 000000000 | Each | 0000 |
Brass Replacement Lever for 1 Coupling Size Sockets | 000000000 | Each | 0000 |
316 Stainless Steel Replacement Lever for 1 1/2 Coupling Size Sockets | 000000000 | Each | 00000 |
316 Stainless Steel Replacement Lever for 3 and 4 Coupling Size Sockets | 000000000 | Each | 00000 |
316 Stainless Steel Replacement Lever for 2 Coupling Size Sockets | 000000000 | Each | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/679/6795k15p1-c01h-digitall@halfx_637085815263993783.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Replacement Levers | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | Pipe Size | Dash Size | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Aluminum with Brass Levers | |||||||||||||
1 | 1 7/16" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
2 | 2 1/2" | 2 | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 |
3 | 3 5/8" | 3 | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
4 | 4 3/4" | 4 | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
Aluminum with 316 Stainless Steel Levers | |||||||||||||
1 | 1 7/16" | 1 | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/2 | 2 1/8" | 1 1/2 | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 2 | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
3 | 3 5/8" | 3 | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 4 | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/679/6795k12p1-c01h-digitall@halfx_637085813485932997.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Replacement Levers | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | For Hose ID | Dash Size | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Aluminum with Brass Levers | |||||||||||||
1 | 1 7/16" | 1" | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 1 1/2" | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
2 | 2 1/2" | 2" | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000 | 00 |
3 | 3 5/8" | 3" | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
4 | 4 3/4" | 4" | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
Aluminum with 316 Stainless Steel Levers | |||||||||||||
1 | 1 7/16" | 1" | 16 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/2 | 2 1/8" | 1 1/2" | 24 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 2" | 32 | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
3 | 3 5/8" | 3" | 48 | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 4" | 64 | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/530/53015k82p2-c01h-digitall@halfx_637085653434819208.png?ver=imagenotfound)
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Replacement Levers | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Socket ID | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Aluminum with Brass Levers | |||||||||||
1/2 | 15/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000 | 00 |
3/4 | 1 1/4" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
1 | 1 7/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/4 | 1 13/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/2 | 2 1/8" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
2 | 2 1/2" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
2 1/2 | 3" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
3 | 3 5/8" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
4 | 4 3/4" | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 0000 |
5 | 5 3/4" | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 000000000 | 00000 | 5 | 0000000 | 00000 | 000000 | 00 |
6 | 6 15/16" | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 00000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
8 | 8 7/8" | 4 | Zinc-Plated Steel | 50 psi @ 72° F | 000000000 | 000000 | 1 | 0000000 | 00000 | 000000000 | 00000 |
Aluminum with 316 Stainless Steel Levers | |||||||||||
1/2 | 15/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
3/4 | 1 1/4" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 | 1 7/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 0000 |
1 1/4 | 1 13/16" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
1 1/2 | 2 1/8" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 | 2 1/2" | 2 | Zinc-Plated Steel | 250 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
2 1/2 | 3" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 0000 | 000000000 | 00000 |
3 | 3 5/8" | 2 | Zinc-Plated Steel | 200 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
4 | 4 3/4" | 2 | Zinc-Plated Steel | 150 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
5 | 5 3/4" | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 0000000 | 00000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
6 | 6 15/16" | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 0000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |