Attach sensors, tubes, and other components to T-slotted framing rails and structures.

Attach and position phones, tablets, monitors, and computer accessories on T-slotted rails.

Screw and nut sets or nuts secure brackets and other accessories to rails.

Use hinges to add doors, lids, and machine guards to T-slotted framing.

Securely fasten strut channel to the floor.

Mount a length of strut channel between the ends of a beam to run cable and conduit along the beam without drilling.

Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

Mount these brackets to strut channel to add stair treads. They’re also known as stringers.

A flat or half-round shape keeps water from pooling on these strut rails. Unlike a traditional C-shape strut, these rails prevent the buildup of bacteria and debris, making them ideal for use in sanitary or food production environments.

Create continuous runs of channel without corners.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.

This welded, one-piece strut channel combines two strut channels side-to-side.

This welded, one-piece strut channel combines two strut channels back-to-back.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

Projections on the base concentrate the weld and create space for heat to dissipate, protecting the threads on these steel weld nuts from deforming.

Projections on the base concentrate the weld and create space for heat to dissipate, protecting the threads on these weld nuts from deforming. Made of 18-8 stainless steel, they withstand mild chemicals and can be used in wet and outdoor environments.

Weld these nuts to stainless steel surfaces.

To protect their threads from deforming, these stainless steel nuts have a projection that concentrates your weld and creates room for heat to dissipate. An offset barrel lets you position threads near the edges and corners of stainless steel sheets.

Install corrosion-resistant threads in sheet metal to create a 90° joint.