How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Aluminum Unthreaded Pipe Flanges
Also known as Pressure Class 125 flanges, these are for use in low-pressure applications. Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line. Flanges are aluminum, which is lightweight with good corrosion resistance.
Butt-weld flanges are also known as weld-neck flanges; the flange neck has a beveled end that, when flush to pipe, creates a trough for a strong weld. Slip-on weld flanges have no internal stop; slide a pipe through the flange and weld on both sides. Reducing flanges let you transition your system to a smaller pipe size; attach to a flange with a larger pipe size but with the same flange dimensions. Cap flanges are also known as blind flanges.


- For Use With: Air, Oil, Water
- Pressure Class: 125
- Specifications Met: ASME B16.1
- Fittings: Use Schedule 40 aluminum
- Pipe: Use Schedule 40 aluminum
Bolt Hole | ||||||||
---|---|---|---|---|---|---|---|---|
Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Each | |
1/2 | 3 1/2" | 1/2" | 5/8" | 4 | 2 3/8" | 150 psi @ 72° F | 000000000 | 000000 |
3/4 | 3 7/8" | 1/2" | 5/8" | 4 | 2 3/4" | 150 psi @ 72° F | 000000000 | 00000 |
1 | 4 1/4" | 1/2" | 5/8" | 4 | 3 1/8" | 150 psi @ 72° F | 000000000 | 00000 |
1 1/2 | 5" | 1/2" | 5/8" | 4 | 3 7/8" | 150 psi @ 72° F | 000000000 | 000000 |
2 | 6" | 5/8" | 3/4" | 4 | 4 3/4" | 150 psi @ 72° F | 000000000 | 000000 |
2 1/2 | 7" | 5/8" | 3/4" | 4 | 5 1/2" | 150 psi @ 72° F | 000000000 | 000000 |
3 | 7 1/2" | 5/8" | 3/4" | 4 | 6" | 150 psi @ 72° F | 000000000 | 000000 |
4 | 9" | 5/8" | 3/4" | 8 | 7 1/2" | 150 psi @ 72° F | 000000000 | 000000 |
6 | 11" | 3/4" | 7/8" | 8 | 9 1/2" | 150 psi @ 72° F | 000000000 | 000000 |


- For Use With: Air, Oil, Water
- Pressure Class: 125
- Specifications Met: ASME B16.1
- Fittings: Use Schedule 40 aluminum
- Pipe: Use Schedule 40 aluminum
Bolt Hole | ||||||||
---|---|---|---|---|---|---|---|---|
Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Each | |
1/2 | 3 1/2" | 1/2" | 5/8" | 4 | 2 3/8" | 150 psi @ 72° F | 00000000 | 000000 |
3/4 | 3 7/8" | 1/2" | 5/8" | 4 | 2 3/4" | 150 psi @ 72° F | 00000000 | 00000 |
1 | 4 1/4" | 1/2" | 5/8" | 4 | 3 1/8" | 150 psi @ 72° F | 000000000 | 00000 |
1 1/4 | 4 5/8" | 1/2" | 5/8" | 4 | 3 1/2" | 150 psi @ 72° F | 000000000 | 00000 |
1 1/2 | 5" | 1/2" | 5/8" | 4 | 3 7/8" | 150 psi @ 72° F | 000000000 | 00000 |
2 | 6" | 5/8" | 3/4" | 4 | 4 3/4" | 150 psi @ 72° F | 000000000 | 00000 |
2 1/2 | 7" | 5/8" | 3/4" | 4 | 5 1/2" | 150 psi @ 72° F | 000000000 | 00000 |
3 | 7 1/2" | 5/8" | 3/4" | 4 | 6" | 150 psi @ 72° F | 000000000 | 00000 |
4 | 9" | 5/8" | 3/4" | 8 | 7 1/2" | 150 psi @ 72° F | 000000000 | 000000 |
6 | 11" | 3/4" | 7/8" | 8 | 9 1/2" | 150 psi @ 72° F | 000000000 | 000000 |
8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | 150 psi @ 72° F | 000000000 | 000000 |



- For Use With: Air, Oil, Water
- Pressure Class: 125
- Specifications Met: ASME B16.1
- Fittings: Use Schedule 40 aluminum
- Pipe: Use Schedule 40 aluminum


- For Use With: Air, Oil, Water
- Pressure Class: 125
- Specifications Met: ASME B16.1
- Fittings: Use Schedule 40 aluminum
- Pipe: Use Schedule 40 aluminum
Bolt Hole | ||||||||
---|---|---|---|---|---|---|---|---|
Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Each | |
1/2 | 3 1/2" | 1/2" | 5/8" | 4 | 2 3/8" | 150 psi @ 72° F | 000000000 | 000000 |
3/4 | 3 7/8" | 1/2" | 5/8" | 4 | 2 3/4" | 150 psi @ 72° F | 000000000 | 00000 |
1 | 4 1/4" | 1/2" | 5/8" | 4 | 3 1/8" | 150 psi @ 72° F | 000000000 | 00000 |
1 1/4 | 4 5/8" | 1/2" | 5/8" | 4 | 3 1/2" | 150 psi @ 72° F | 000000000 | 00000 |
1 1/2 | 5" | 1/2" | 5/8" | 4 | 3 7/8" | 150 psi @ 72° F | 000000000 | 00000 |
2 | 6" | 5/8" | 3/4" | 4 | 4 3/4" | 150 psi @ 72° F | 000000000 | 00000 |
2 1/2 | 7" | 5/8" | 3/4" | 4 | 5 1/2" | 150 psi @ 72° F | 000000000 | 00000 |
3 | 7 1/2" | 5/8" | 3/4" | 4 | 6" | 150 psi @ 72° F | 000000000 | 000000 |
4 | 9" | 5/8" | 3/4" | 8 | 7 1/2" | 150 psi @ 72° F | 000000000 | 000000 |
6 | 11" | 3/4" | 7/8" | 8 | 9 1/2" | 150 psi @ 72° F | 000000000 | 000000 |
8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | 150 psi @ 72° F | 000000000 | 000000 |
Low-Pressure Aluminum Threaded Pipe Flanges
Also known as Pressure Class 125 flanges, these are for use in low-pressure applications. Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line. Flanges are aluminum, which is lightweight with good corrosion resistance.
Reducing flanges allow you to transition your system to a smaller pipe size; attach to a flange with a larger pipe size but with the same flange dimensions.


- For Use With: Air, Oil, Water
- Pressure Class: 125
- Specifications Met:
Pipe Size 1-6: ASME B16.1 - Fittings: Use Class 150 aluminum
- Pipe Nipples and Pipe: Use Schedule 40 aluminum
Bolt Hole | ||||||||
---|---|---|---|---|---|---|---|---|
Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Each | |
NPT | ||||||||
1/2 | 3 1/2" | 1/2" | 5/8" | 4 | 2 3/8" | 150 psi @ 72° F | 000000000 | 000000 |
3/4 | 3 7/8" | 1/2" | 5/8" | 4 | 2 3/4" | 150 psi @ 72° F | 000000000 | 00000 |
1 | 4 1/4" | 1/2" | 5/8" | 4 | 3 1/8" | 150 psi @ 72° F | 000000000 | 00000 |
1 1/4 | 4 5/8" | 1/2" | 5/8" | 4 | 3 1/2" | 150 psi @ 72° F | 000000000 | 00000 |
1 1/2 | 5" | 1/2" | 5/8" | 4 | 3 7/8" | 150 psi @ 72° F | 000000000 | 00000 |
2 | 6" | 5/8" | 3/4" | 4 | 4 3/4" | 150 psi @ 72° F | 000000000 | 00000 |
2 1/2 | 7" | 5/8" | 3/4" | 4 | 5 1/2" | 150 psi @ 72° F | 000000000 | 00000 |
3 | 7 1/2" | 5/8" | 3/4" | 4 | 6" | 150 psi @ 72° F | 000000000 | 00000 |
4 | 9" | 5/8" | 3/4" | 8 | 7 1/2" | 150 psi @ 72° F | 000000000 | 000000 |
6 | 11" | 3/4" | 7/8" | 8 | 9 1/2" | 150 psi @ 72° F | 000000000 | 000000 |
8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | 150 psi @ 72° F | 000000000 | 000000 |



- For Use With: Air, Oil, Water
- Pressure Class: 125
- Specifications Met: ASME B16.1
- Fittings: Use Class 150 aluminum
- Pipe Nipples and Pipe: Use Schedule 40 aluminum
Bolt Hole | |||||||||
---|---|---|---|---|---|---|---|---|---|
Pipe Size | For Flange Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Each | |
NPT | |||||||||
1/2 | 3/4 | 3 7/8" | 1/2" | 5/8" | 4 | 2 3/4" | 150 psi @ 72° F | 000000000 | 000000 |
3/4 | 1 | 4 1/4" | 1/2" | 5/8" | 4 | 3 1/8" | 150 psi @ 72° F | 000000000 | 00000 |
1 | 1 1/4 | 4 5/8" | 1/2" | 5/8" | 4 | 3 1/2" | 150 psi @ 72° F | 000000000 | 00000 |
1 1/4 | 1 1/2 | 5" | 1/2" | 5/8" | 4 | 3 7/8" | 150 psi @ 72° F | 000000000 | 00000 |
1 1/2 | 2 | 6" | 5/8" | 3/4" | 4 | 4 3/4" | 150 psi @ 72° F | 000000000 | 00000 |
2 | 2 1/2 | 7" | 5/8" | 3/4" | 4 | 5 1/2" | 150 psi @ 72° F | 000000000 | 00000 |
2 | 3 | 7 1/2" | 5/8" | 3/4" | 4 | 6" | 150 psi @ 72° F | 000000000 | 000000 |
3 | 4 | 9" | 5/8" | 3/4" | 8 | 7 1/2" | 150 psi @ 72° F | 000000000 | 000000 |
4 | 6 | 11" | 3/4" | 7/8" | 8 | 9 1/2" | 150 psi @ 72° F | 000000000 | 000000 |
6 | 8 | 13 1/2" | 3/4" | 7/8" | 8 | 11 3/4" | 150 psi @ 72° F | 000000000 | 000000 |
Low-Pressure Aluminum Threaded Pipe Fittings
In addition to being lightweight, these aluminum fittings offer good corrosion resistance. Use them in low-pressure flow applications. To prevent cracking, do not tighten more than a 1/4-turn past hand tight.
Adapters for tanks weld onto the surface of any tank, pressure vessel, or drum to create a permanent inlet or outlet connection. Adapters with extended lip fit tightly into the hole, which keeps the fitting steady during welding.
NPTF (Dryseal) threads and NPSL (National Pipe Straight Locknut) threads are compatible with NPT threads.

- For Use With: Water, Oil, Gasoline, Diesel Fuel
- Specifications Met: ASTM B221
- Pipe Nipples and Pipe: Use Schedule 40 aluminum
Pipe Size | For Hole Dia. | OD | Lg. | Each | |
NPT Female × Weld | |||||
---|---|---|---|---|---|
1/8 | 7/8" | 1 5/16" | 1/4" | 0000000 | 00000 |
1/4 | 7/8" | 1 5/16" | 1/4" | 0000000 | 00000 |
3/8 | 1 3/16" | 1 7/16" | 1/4" | 0000000 | 00000 |
1/2 | 1 1/8" | 1 5/8" | 1/4" | 0000000 | 00000 |
3/4 | 1 5/16" | 2" | 1/4" | 0000000 | 00000 |
1 | 1 11/16" | 2 1/4" | 1/4" | 0000000 | 00000 |
1 1/4 | 1 15/16" | 2 9/16" | 5/16" | 0000000 | 00000 |
1 1/2 | 2 1/4" | 2 15/16" | 5/16" | 0000000 | 00000 |
2 | 2 5/8" | 3 3/8" | 5/16" | 0000000 | 00000 |
3 | 3 11/16" | 4 5/8" | 3/4" | 0000000 | 000000 |
4 | 4 3/4" | 5 13/16" | 7/8" | 0000000 | 000000 |
Metal Cam-and-Groove Hose Couplings for Water

A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug.
Aluminum couplings are lighter in weight than brass plugs and sockets. They have good abrasion and corrosion resistance thanks to their anodized finish.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.

- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: ASME B16.5, Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Plugs with flanged end are also known as PFA adapters. Bolt the flanged end to another same-size flange with a gasket (sold separately).
Bolt Holes | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Coupling Size | Plug OD | Pipe Size | Flange OD | Flanged Connection Surface | Pressure Class | Max. Pressure | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Each | |
Anodized Aluminum | ||||||||||||
2 | 2 1/2" | 2 | 6" | Flat | 150 | 250 psi @ 72° F | 5/8" | 3/4" | 4 | 4 3/4" | 00000000 | 0000000 |
3 | 3 5/8" | 3 | 7 1/2" | Flat | 150 | 200 psi @ 72° F | 5/8" | 3/4" | 4 | 6" | 00000000 | 000000 |
4 | 4 3/4" | 4 | 9" | Flat | 150 | 150 psi @ 72° F | 5/8" | 3/4" | 8 | 7 1/2" | 00000000 | 000000 |
6 | 6 15/16" | 6 | 11" | Flat | 150 | 75 psi @ 72° F | 3/4" | 7/8" | 8 | 9 1/2" | 00000000 | 000000 |
Minimal-Spill Push-and-Turn Hose Couplings for Chemicals

Quickly connect and disconnect hose lines used with a variety of chemicals, from adhesives to isopropyl alcohol and ink. Any part of these couplings that contacts fluid is made from 316 stainless steel, C-276 Hastelloy, PTFE, or fluoroelastomer to withstand the chemicals in your line. Tough enough to handle frequent use, these couplings are designed to be virtually spill free. Also known as dry disconnects and double-shut off couplings, both the plug and the socket have a shut-off valve that stops the flow of liquids when they’re separated. To connect, push the plug into the socket and lock with a quarter turn. The socket swivels, so you won’t have to twist your hose to attach the plug. It also has a rubber lip and large handles to prevent damage if it’s dropped.
A complete coupling consists of a plug and a socket (both sold separately). They’re compatible with MannTek, Avery Hardoll, Todo-matic, and other dry-disconnect couplings that meet NATO standard STANAG 3756.
Aluminum couplings are lighter in weight than stainless steel and have good corrosion resistance.

- For Use With:
Aluminum: Acetone, Adhesives, Benzene, Boric Acid, Butyl Alcohol, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydraulic Fluid, Ink, Isopropyl Alcohol, Mineral Oil, Mineral Spirits, Varnish, Vegetable Oil
316 Stainless Steel: Acetone, Adhesives, Benzene, Boric Acid, Butyl Alcohol, Citric Acid, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydraulic Fluid, Ink, Isopropyl Alcohol, Mineral Oil, Mineral Spirits, Nitric Acid, Sodium Hydroxide, Varnish, Vegetable Oil - Maximum Pressure:
Aluminum: 230 psi @ 72° F
316 Stainless Steel: 360 psi @ 72° F - Temperature Range: -15° to 400° F
Pipe Flange Aligners with Protractor

Line up two pipe flanges and determine pipe angle with the included nut-and-bolt pins, level, and protractor. Flange holes align as you tighten the pins.
For Flange Hole Dia. | Angle Measuring Range | Graduation Marks (Numeric Increments) | For Distance Between Bolt Holes | Each | |
Aluminum | |||||
---|---|---|---|---|---|
3/16"-1 3/4" | 0°-90° | 2.5° (2°) | 2"-5 1/2" | 0000000 | 0000000 |
Magnetic Pipe Flange Aligners with Level


Ensure an even seal around your flange—these tools align and level flanges in a single step. The strong magnets make sure your bolt holes are perfectly inline horizontally and that your flange isn’t tilted. If your flange is made of stainless steel or another nonmagnetic material, secure these aligners using the included threaded cones.
For Flange Hole Dia. | For Max. Ctr-to-Ctr Flange Hole Distance | Level Lg. | Includes | Cone Material | Magnet Material | Container Type | Each | |
Aluminum Body | ||||||||
---|---|---|---|---|---|---|---|---|
1/2"-2" | 9 1/2" | 10 1/2" | Threaded Cones | Steel | Neodymium | Carrying Case | 0000000 | 0000000 |