We will reply to your message within an hour.
Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.
Harder than our other 304 stainless steel, these thin sheets offer better wear resistance for use as a wrap, liner, or cover.
Able to withstand repeated stress and wear, 301 stainless steel has the strength required for applications such as springs and fasteners.
Because these thin sheets are harder than our other 316 stainless steel, they offer better wear resistance. Use them as a wrap, liner, or cover.
With a higher chromium content than 15-5 PH stainless steel, this high-strength 17-4 PH offers better corrosion resistance. It is also known as 630 stainless steel.
Made of 1000 series aluminum which is 99% pure, this aluminum offers superior formability, corrosion resistance, and electrical conductivity. It's frequently fabricated into raceways, decorative trim, and other parts where strength and hardness are not required.
3000 series aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability. It's often used for storage tanks, heat exchangers, garage doors, and general sheet metal work.
Also known as blue-tempered steel.
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.
Because 510 bronze is very strong and formable, it is the best choice for applications involving repetitive motion, such as springs and bellows.
Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.
Able to withstand greater heat than molybdenum and other high-temperature metal, this chemically pure tungsten is ultra dense for use in high-heat parts in vacuum furnaces, heat shields, and radiation shields.
Thin and easy to cut, this 99.95% pure tantalum foil is good for coating heating elements that are used in furnaces. Harder than platinum and able to withstand higher temperatures than gold, it also resists corrosion and conducts heat.
Thin and easy-to-cut, this 99.95% pure molybdenum foil is often used in parts that process molten glass, heat shields in furnaces, and as filament supports in high-intensity light bulbs.
Since these niobium sheets have a higher melting point than most other metal, they’re also called refractory metal. They’re highly conductive, corrosion resistant, and maintain their strength even at high temperatures.
An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.
Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.
In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.
The addition of carbon gives this material the ability to divert static electricity faster than antistatic UHMW.
Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.
Widely used in semiconductor applications, this polypropylene meets UL flame-retardance standards.
An aluminum coating on one side of this film reflects heat, so it’s widely used as an insulator and in packaging applications.
This film is often used as a separator when heating parts in an oven.
This film is made with virgin Teflon® PTFE resins. It can handle extreme temperatures and resists most solvents.
Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.
Kapton® polyimide film is an excellent electrical insulator.
Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.
Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.
Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.
The slippery surface on this FEP film prevents sticking. Use it as a release film when making molded parts.
PFA film retains its performance properties through a wide range of temperatures. It is often used to insulate cables.
Stronger and more chemical resistant than FEP and PFA film, ETFE film resists cracking over time.
At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.
Polyester absorbs almost no moisture and resists swelling in wet environments. It is also known as PET and PETE.
Also called acetate, this is the same clear film that's used in window envelopes.
These platinum-cured silicone rubber sheets and strips meet the strict purity standards of USP Class VI.
A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.
Also known as fishpaper.
Cut this stock into custom shapes to fit your application.
A durable acrylic adhesive keeps this shim stock from sliding out of place. Cut it into custom shapes to fit your application.
This shim stock is color coded by thickness for easy identification. Cut it into custom shapes to fit your application.
The PTFE coating makes these fiberglass sheets nonstick and chemical resistant.
These sheets are 50% more tear resistant than other fiberglass fabric sheets.
Pores allow for air circulation, so these sheets are often used in drying applications.
Commonly used as curtains and in sealing applications.
Trap small particles in low-flow applications—these sheets have tiny holes and small open area.
Cut or fold this paper to the size and shape you need for liquid filtration applications.
Hold large shipments on a pallet tightly together during transport.
Keep covered items dry with these UV-resistant tarps.