We will reply to your message within an hour.
Harder than our other 304 stainless steel, these thin sheets offer better wear resistance for use as a wrap, liner, or cover.
Able to withstand repeated stress and wear, 301 stainless steel has the strength required for applications such as springs and fasteners.
Use 430 stainless steel in decorative and light structural applications, rather than outdoors or in extreme temperatures.
Because these thin sheets are harder than our other 316 stainless steel, they offer better wear resistance. Use them as a wrap, liner, or cover.
With a higher chromium content than 15-5 PH stainless steel, this high-strength 17-4 PH offers better corrosion resistance. It is also known as 630 stainless steel.
This material is hardened for increased wear resistance over standard 420 stainless steel.
440A stainless steel resists damage from impact and abrasion. It's often used for cutlery and valve components.
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
Made of 1000 series aluminum which is 99% pure, this aluminum offers superior formability, corrosion resistance, and electrical conductivity. It's frequently fabricated into raceways, decorative trim, and other parts where strength and hardness are not required.
3000 series aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability. It's often used for storage tanks, heat exchangers, garage doors, and general sheet metal work.
Also known as blue-tempered steel.
Also known as scaleless steel.
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.
Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.
Because 510 bronze is very strong and formable, it is the best choice for applications involving repetitive motion, such as springs and bellows.
Because Invar 36 holds its size and shape when temperatures rise, these nickel-iron alloy sheets are the go-to material when dimensional stability is required. They are commonly used when precision is a priority, such as for scientific instruments and optical devices.
Use this nickel-iron-cobalt alloy as a magnetic shield to protect electronic equipment from EMI/RFI interference.
These nickel-iron-cobalt alloy sheets expand at the same rate as glass when heated. They offer better machinability than Invar 36 and are often used anywhere a dependable glass-to-metal seal is required, such as in diodes and microwave tubes.
Able to withstand greater heat than molybdenum and other high-temperature metal, this chemically pure tungsten is ultra dense for use in high-heat parts in vacuum furnaces, heat shields, and radiation shields.
Thin and easy to cut, this 99.95% pure tantalum foil is good for coating heating elements that are used in furnaces. Harder than platinum and able to withstand higher temperatures than gold, it also resists corrosion and conducts heat.
Thin and easy-to-cut, this 99.95% pure molybdenum foil is often used in parts that process molten glass, heat shields in furnaces, and as filament supports in high-intensity light bulbs.
Since these niobium sheets have a higher melting point than most other metal, they’re also called refractory metal. They’re highly conductive, corrosion resistant, and maintain their strength even at high temperatures.
Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.
An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.
In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.
The addition of carbon gives this material the ability to divert static electricity faster than antistatic UHMW.
Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.
Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.
Widely used in semiconductor applications, this polypropylene meets UL flame-retardance standards.
Often used for packaging and construction applications, this film is also known as Visqueen.
This film is made with virgin Teflon® PTFE resins. It can handle extreme temperatures and resists most solvents.
Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.
Kapton® polyimide film is an excellent electrical insulator.
Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.
Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.
Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.
Laminate or mold this plastic film onto credit card signing screens, signs, and other surfaces for a see-through protective layer that won’t scratch.
At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.
Polyester absorbs almost no moisture and resists swelling in wet environments. It is also known as PET and PETE.
Also called acetate, this is the same clear film that's used in window envelopes.
These platinum-cured silicone rubber sheets and strips meet the strict purity standards of USP Class VI.
These natural rubber sheets and strips will stretch up to six times their length. Use them in dynamic applications, such as vibration isolators and shock mounts.
A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.
Also known as fishpaper.
Use these resin-free fabrics to reinforce or repair existing composites as well as create new composites. Mold custom-shaped composite parts by layering your choice of fabric with an epoxy.
Cut this stock into custom shapes to fit your application.
A durable acrylic adhesive keeps this shim stock from sliding out of place. Cut it into custom shapes to fit your application.
Cut this shim stock into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need.
This shim stock is color coded by thickness for easy identification. Cut it into custom shapes to fit your application.
These magnets are made of corrosion-resistant ceramic and bonded with rubber for flexibility.
The PTFE coating makes these fiberglass sheets nonstick and chemical resistant.
These sheets are 50% more tear resistant than other fiberglass fabric sheets.
Pores allow for air circulation, so these sheets are often used in drying applications.
Lighter than Kevlar, Nomex is often used for temperature-resistant garments.
Use for wrap-around insulation.
With thickness similar to filter paper, this fabric provides higher flow and is more flexible than felt.
Often used in laboratory testing, these discs are designed to capture tiny particles from fluids.
Shield vents on electronic and automotive equipment, such as cell phone microphones, from water, dirt, and debris without blocking them entirely.
Made of indium, this foil is more thermally conductive than thermal interface materials (TIMs) made of plastic.
Protect your floor from paint overspray and spills with this absorbent paper.
Shield shipments of metal equipment that could be exposed to the outdoors for long periods of time.
This film is thicker than standard heat-shrink film, so it's ideal for large and irregularly shaped objects.
Cover objects with sharp angles and points with this film to protect them from sun, dirt, moisture, and damage.
Guard insulation from heavy impact and chemical exposure. This metal jacketing is corrosion resistant and often used outdoors.
A magnet sewn into each corner keeps these tarps in place on equipment.
Block out stray and unwanted light.
Apply this vinyl film directly to your window to block the view.
In addition to dimming incoming light, this reusable film helps cut down on glare.