About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
About Plastic
More
Multipurpose 304 Stainless Steel
From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.
Bars with sheared edges are also known as Gauer bar and are sheared from plate.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 30,000 psi
- Hardness: See Table
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met: See Table
1/2 ft. Lg. | |||||||
|---|---|---|---|---|---|---|---|
| Wd. | Wd. Tolerance | Fabrication | Edge Fabrication | Hardness | Specifications Met | Straightness Tolerance | |
5" (-0.01" to 0.2" Tolerance) | |||||||
| 6" | -1/8" to 1/8" | Hot Rolled | Sheared | Rockwell B90 (Medium) | ASTM A240 | Not Rated | 0000000 |
Multipurpose 6061 Aluminum Sheets and Bars
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
Extruded sheets and bars are formed by a die for close-tolerance widths, then cut to the lengths listed.
Aluminum that meets ASTM B209 or ASTM B221 complies with standards for materials.
Aluminum that meets an SAE AMS standard conforms to the material and process needs of the aerospace industry.
If you don’t see the sheet or bar size you need, please specify dimensions under additional sheet sizes or additional bar lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 35,000 psi
- Hardness: Brinell 95 (Soft)
- Temper: See table
- Fabrication: See table
- Specifications Met: See table
- Yield Strength: 35,000 psi
- Hardness: Brinell 95 (Soft)
- Temper: T6511
- Fabrication: Extruded
- Specifications Met: ASTM B221, SAE AMS QQ-A-200/8
| Thick. | Thick. Tolerance | Wd. | Wd. Tolerance | Lg. | Heat Treatment | Temp. Range, °F | Length Tolerance | Each | |
| 5" | -0.034" to 0.034" | 5" | -0.034" to 0.034" | 5" | Hardened | -320° to 300° | Plus | 00000000 | 0000000 |
Tight-Tolerance Multipurpose 6061 Aluminum Sheets and Bars
- Yield Strength: 35,000 psi
- Hardness: Brinell 95 (Soft)
- Temper: See table
- Fabrication: See table
- Specifications Met: ASTM B209
These sheets and bars are precision ground either on all six sides or just on the top and bottom. The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
Sheets and bars that are precision ground on all sides are consistently flat, square, and parallel on all six sides. They’re also known as blanks and are ready for use in your CNC machine.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Thick. | Thick. Tolerance | Fabrication | Temper | Heat Treatment | Temperature Range, °F | Flatness Tolerance | Each | |
Precision Ground on All Sides | ||||||||
|---|---|---|---|---|---|---|---|---|
5" x 5" | ||||||||
| 5" | -0.002" to 0.002" | Cold Rolled | T651 | Hardened | -320° to 300° | Not Rated | 0000000 | 0000000 |
Low-Carbon Steel Sheets and Bars
Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength, such as fixture clamps, mounting plates, and spacers. Some of this material can be surface hardened with heat treating.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Slippery UHMW Polyethylene Sheets, Bars, and Strips
In addition to having a low-friction surface that prevents sticking and binding, this tough, impact- and wear-resistant material handles the scuffs, scrapes, and strikes that other plastics can’t. These sheets, bars, and strips are often used to make machine guards and chute liners. They are all FDA compliant for direct food contact.
If you don't see the size of white sheet you're looking for, please specify length and width under additional white sheet sizes.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: -40° to 180° F
- Tensile Strength: 4,350-5,800 psi (Poor)
- Impact Strength: 16.8 ft.-lbs./in. (Excellent)
- Hardness: Durometer 65D-67D (Medium)
- For Use Outdoors: No
- Specifications Met:
White: ASTM D4020, ASTM D6712, FDA Compliant 21 CFR 177.1520, UL 94 HB
Black: ASTM D4020, ASTM D6712, FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.2010, FDA Compliant 21 CFR 178.3297, UL 94 HB
White | Black | |||||
|---|---|---|---|---|---|---|
| Thick. | Thickness Tolerance | Fabrication | Each | Each | ||
6" × 6" | ||||||
| 5" | -0.25" to 0.25" | Extruded | 00000000 | 000000 | 00000000 | 000000 |
6" × 12" | ||||||
| 5" | -0.25" to 0.25" | Extruded | 00000000 | 000000 | 00000000 | 000000 |
12" × 12" | ||||||
| 5" | -0.25" to 0.25" | Extruded | 00000000 | 000000 | 00000000 | 000000 |
12" × 24" | ||||||
| 5" | -0.25" to 0.25" | Extruded | 00000000 | 000000 | 00000000 | 000000 |
12" × 36" | ||||||
| 5" | -0.25" to 0.25" | Extruded | 00000000 | 000000 | 00000000 | 000000 |
24" × 24" | ||||||
| 5" | -0.25" to 0.25" | Extruded | 00000000 | 000000 | 00000000 | 000000 |