Filter by
Width
Step Tread
Bearing Bar Height
For Use Outdoors
Grit Color
Number of Steps
DFARS Specialty Metals
Export Control Classification Number (ECCN)
For Use On
Nosing Surface
Texture
Metal Bar Grating Stair Treads
 |  |  |
Smooth Aluminum | Serrated Aluminum | Mounting Dimensions |
Choose these stair treads for greater durability than metal plank grating stair treads. They have an open surface that prevents debris from accumulating. Nosing is textured for traction.
Aluminum—Aluminum treads are more corrosion resistant than galvanized steel. Plus, they're lightweight, nonsparking, and nonmagnetic.
Drainage Opening | Mounting Hole | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Dp. | Ht. | Thk. | Bearing Bar Ht. | Wd. | Lg. | Load Cap., lb. | No. of | Dia. | Lg. | Wd. | Ctr.-to-Ctr. (A) | Ctr.-to-Tread Top (B) | Ctr.-to-Tread Nosing (C) | Mounting Hardware Included | For Use Outdoors | Each | |||
Smooth | ||||||||||||||||||||
Aluminum | ||||||||||||||||||||
| 18" | 8 9/16" | 3" | 3/16" | 1 1/4" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 4 1/2" | 2 1/4" | 1 1/8" | No | Yes | 4342T71 | 000000 | ||
| 24" | 7 3/8" | 3" | 3/16" | 1 1/4" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 4 1/2" | 2 1/4" | 1 1/8" | No | Yes | 4342T72 | 000000 | ||
| 24" | 8 9/16" | 3" | 3/16" | 1 1/4" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 4 1/2" | 2 1/4" | 1 1/8" | No | Yes | 4342T73 | 00000 | ||
| 30" | 8 9/16" | 3" | 3/16" | 1 1/4" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 4 1/2" | 2 1/4" | 1 1/8" | No | Yes | 4342T74 | 000000 | ||
Serrated | ||||||||||||||||||||
Aluminum | ||||||||||||||||||||
| 18" | 8 9/16" | 3" | 3/16" | 1 1/4" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 4 1/2" | 2 1/4" | 1 1/8" | No | Yes | 69105T82 | 00000 | ||
| 24" | 7 3/8" | 3" | 3/16" | 1 1/4" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 4 1/2" | 2 1/4" | 1 1/8" | No | Yes | 69105T83 | 00000 | ||
| 24" | 8 9/16" | 3" | 3/16" | 1 1/4" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 4 1/2" | 2 1/4" | 1 1/8" | No | Yes | 69105T84 | 00000 | ||
| 30" | 8 9/16" | 3" | 3/16" | 1 1/4" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 4 1/2" | 2 1/4" | 1 1/8" | No | Yes | 69105T86 | 00000 | ||
Ladder-Style Steps
 |
Serrated Step |
 |
Perforated Step |
Good for use as ladder rungs, cut these steps to size with a metal-cutting saw and weld them in place. For a clean weld, match the step material to the surface you are welding to. These steps must be welded at each end with welds capable of supporting the rated capacity. For those 5 ft. and longer, the maximum cut length is 24". Shorter lengths support higher capacities.
Note: Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Serrated Step—Serrated steps give you maximum slip resistance and allow liquids and debris to pass through. Perforated steps are less slip-resistant than serrated steps but offer a more comfortable hand grip.
Overall | |||||||
|---|---|---|---|---|---|---|---|
Ht. | Wd. | Dp. | Weight Capacity | Each | |||
Aluminum | |||||||
Serrated Step | |||||||
| 1 1/2" | 17" | 2" | 540 lb. | 6926T11 | 000000 | ||
| 1 1/2" | 7 ft. | 2" | 250 lb. for 18" to 24" Cut Lengths, 540 lb. Up to 18" Cut Lengths | 6926T12 | 000000 | ||
Perforated Step | |||||||
| 1 1/8" | 5 ft. | 1 5/8" | 220 lb. for 18" to 24" Cut Lengths, 290 lb. Up to 18" Cut Lengths | 6926T116 | 00000 | ||
| 1 1/2" | 5 ft. | 1 1/4" | 310 lb. for 18" to 24" Cut Lengths, 410 lb. Up to 18" Cut Lengths | 6926T112 | 00000 | ||
| 1 1/2" | 5 ft. | 2 1/4" | 540 lb. for 18" to 24" Cut Lengths, 720 lb. Up to 18" Cut Lengths | 6926T119 | 00000 | ||
Stair Nosing
 |  |
Style A | Style B |
Screw nosing into place to protect the front portion of the stair and provide a slip-resistant surface. Construction adhesive (sold separately) is for use between nosing and the front edge of the stair to prevent cracks.
Style A—Style A are for use on wood or concrete stairs. For wood stairs, use #10 wood screws. For concrete stairs, use 3/16" diameter tapping screws. Style A have a front channel filled with grit and a rear abrasive strip for added traction.
Style B—Style B can be installed in fresh concrete as well as on existing concrete stairs. Use concrete screws for 1/4" diameter countersunk holes. Nosing has five channels filled with an abrasive grit compound for excellent traction and slip resistance.
Style | Dp. | Ht. | Thk. | Material | Mounting Hardware Included | For Use On | For Use Outdoors | Choose a Grit Color | 36" Wide | 42" Wide | 48" Wide | 60" Wide | 72" Wide | 96" Wide | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Grit Coated | |||||||||||||||||
| A | 3" | 13/16" | 3/16" | Aluminum | No | Concrete, Wood | Yes | Black | 6282T45 | 000000 | 000000 | 000000 | 000000 | 000000 | 0000000 | ||
| B | 2 7/8" | 1/4" | 1/4" | Aluminum | No | Concrete | Yes | Black, Yellow | 6846T14 | 00000 | 00000 | 00000 | 00000 | 00000 | — | ||
Stair Tread Covers
 |
Style F |
Protect stairs from wear or provide a new stair surface on worn stairs. Covers fit square-nose concrete and wood stairs.
Grit
|
Style F |
Style F—Style F are corrosion-resistant aluminum with a grit top for excellent traction in high-traffic areas. Covers have 1/4" diameter countersunk mounting holes. To install, use construction adhesive (sold separately), or screw in place; use concrete screws or #10 wood screws.
Style | Dp. | Ht. | Thk. | Material | Mounting Hardware Included | For Use Outdoors | Choose a Grit Color | 36" Wide | 42" Wide | 48" Wide | 54" Wide | 60" Wide | 72" Wide | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| F | 8 7/8" | 1 1/8" | 9/32" | Aluminum | No | Yes | Black, Black/Yellow, Light Gray | 6847T12 | 0000000 | 0000000 | 0000000 | 0000000 | 0000000 | 0000000 | |
| F | 10 7/8" | 1 1/8" | 9/32" | Aluminum | No | Yes | Black, Black/Yellow, Light Gray | 6847T13 | 000000 | 000000 | 000000 | 000000 | 000000 | 000000 |
Step Handles
 |
Weld On |
Add a hand- or foothold for easier access to your vehicle or equipment. These handles have a textured surface that’s easy to grip and keeps you from slipping.
Note: Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Weld On—Weld-on step handles can be installed with the side guards facing up or down. Mount them up to keep your toe from slipping; mount them down to maximize the surface area on top of the handle. For a clean weld, choose a handle that’s the same material as your mounting surface.
Overall | Step | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Material | Ht. | Wd. | Dp. | Wd. | Dp. | Tread | Projection | Wt., lb. | Assembly | Each | |||
Weld On | |||||||||||||
| Aluminum | 1 5/8" | 7 3/4" | 4 1/8" | 7" | 1 5/8" | Diamond Tread | 4 1/8" | 1.12 | Assembled | 9823N11 | 000000 | ||
Wall-Mount Steps
 |
Stop dragging a step stool to the same place again and again—permanently mount these short stairs where you need them. Steps are serrated for maximum slip resistance. You are responsible for adhering to local, state, and federal safety codes, including OSHA.
Stair Nosing for Wet Concrete
 |  |
Style A | Style B |
Style | Dp. | Ht. | Thk. | Material | For Use On | For Use Outdoors | Features | Choose a Grit Color | 36" Wide | 42" Wide | 48" Wide | 60" Wide | 72" Wide | 144" Wide | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Grit Coated | |||||||||||||||||
| A | 2 7/8" | 1/4" | 1/4" | Aluminum | Wet Concrete | Yes | Integral Anchor | Black, Yellow | 7745T59 | 000000 | 000000 | 000000 | 000000 | 0000000 | 0000000 | ||
Grit Coated, Textured | |||||||||||||||||
| B | 2 11/16" | 3/8" | 5/16" | Aluminum | Wet Concrete | Yes | Integral Anchor | — | 6952T11 | 00000 | 00000 | 000000 | 000000 | 000000 | — | ||
| B | 3 11/16" | 3/8" | 5/16" | Aluminum | Wet Concrete | Yes | Integral Anchor | — | 6952T12 | 00000 | 000000 | 000000 | 000000 | 000000 | — | ||
Abrasive Antislip Tape with Conformable Backing
 |
Stick this ultra-flexible tape to ladder rungs, diamond tread plates, and other uneven and irregular surfaces with sharp corners. After installation, wait one hour before walking on this tape.
Rectangle
 |
Wd. | Lg., ft. | Thk. | Adhesive Material | Time Req. Before Use, hr. | Temp. Range, ° F | For Use Outdoors | Color | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Aluminum | |||||||||||
| 6" | 2 | 3/64" | Acrylic Plastic | 1 | 40 to 175 | Yes | Black | 6244T22 | 000000 | ||
Roll
 |
Wd. | Lg., ft. | Thk. | Adhesive Material | Time Req. Before Use, hr. | Temp. Range, ° F | For Use Outdoors | Color | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Aluminum | |||||||||||
| 2" | 15 | 3/64" | Acrylic Plastic | 1 | 40 to 175 | Yes | Black | 6244T51 | 000000 | ||
| 4" | 15 | 3/64" | Acrylic Plastic | 1 | 40 to 175 | Yes | Black | 6244T52 | 00000 | ||
| 6" | 15 | 3/64" | Acrylic Plastic | 1 | 40 to 175 | Yes | Black | 6244T53 | 00000 | ||
| 12" | 15 | 3/64" | Acrylic Plastic | 1 | 40 to 175 | Yes | Black | 6244T54 | 000000 | ||
Heavy Duty Metal Antislip Tape
 |
Metal abrasives embedded in a metal backing allow this tape to last far longer than other antislip tape. It is often used to cover larger areas than other antislip tape, such as walkways and ramps. Tape has an adhesive backing and can be walked on immediately after installation.
Extreme-Traction Abrasive Antislip Tape
Square
 |
Wd. | Lg. | Thk. | Adhesive Material | Temp. Range, ° F | For Use Outdoors | Color | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
Polyester Plastic | ||||||||||
| 5 1/2" | 5 1/2" | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T36 | 00000 | ||
Rectangle
Roll
|
Wd. | Lg., ft. | Thk. | Adhesive Material | Temp. Range, ° F | For Use Outdoors | Color | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
Polyester Plastic | ||||||||||
| 3/4" | 30 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T43 | 00000 | ||
| 3/4" | 60 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T44 | 00000 | ||
| 1" | 30 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T45 | 00000 | ||
| 1" | 60 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T11 | 00000 | ||
| 2" | 30 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T12 | 00000 | ||
| 2" | 60 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T46 | 00000 | ||
| 3" | 30 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T47 | 00000 | ||
| 3" | 60 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T48 | 00000 | ||
| 4" | 30 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T13 | 00000 | ||
| 4" | 60 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T49 | 00000 | ||
| 6" | 30 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T14 | 00000 | ||
| 6" | 60 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T51 | 000000 | ||
| 12" | 15 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T15 | 00000 | ||
| 12" | 30 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T52 | 00000 | ||
| 12" | 60 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T53 | 000000 | ||
| 18" | 15 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T16 | 00000 | ||
| 18" | 30 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T54 | 000000 | ||
| 18" | 60 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T55 | 000000 | ||
| 24" | 15 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T17 | 000000 | ||
| 24" | 30 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T56 | 000000 | ||
| 24" | 60 | 3/64" | Acrylic Plastic | -40 to 220 | Yes | Black | 7781T57 | 000000 | ||
High-Visibility Antislip Tape
Roll
 |
Green—Glow-in-the-Dark |
Green—Glow-in-the-Dark | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Wd. | Lg., ft. | Thk. | Abrasive Material | Temp. Range, ° F | For Use Outdoors | Each | |||
Polyester Plastic | |||||||||
| 3/4" | 60 | 1/32" | Aluminum Oxide | -40 to 220 | Yes | 6970T461 | 000000 | ||
| 1" | 60 | 1/32" | Aluminum Oxide | -40 to 220 | Yes | 6970T462 | 00000 | ||
| 2" | 30 | 1/32" | Aluminum Oxide | -40 to 220 | Yes | 6970T712 | 00000 | ||
| 4" | 30 | 1/32" | Aluminum Oxide | -40 to 220 | Yes | 6970T762 | 00000 | ||
| 6" | 30 | 1/32" | Aluminum Oxide | -40 to 220 | Yes | 6970T792 | 000000 | ||
| 12" | 30 | 1/32" | Aluminum Oxide | -40 to 220 | Yes | 6970T842 | 000000 | ||
Abrasive Antislip Tape
Roll
|
Wd. | Lg., ft. | Thk. | Adhesive Material | Temp. Range, ° F | For Use Outdoors | Choose a Color | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
Polyester Plastic | ||||||||||
| 3/4" | 60 | 1/32" | Acrylic Plastic | -40 to 220 | Yes | Red, Yellow | 6970T22 | 000000 | ||
| 1" | 60 | 1/32" | Acrylic Plastic | -40 to 220 | Yes | Red, Yellow | 6970T23 | 00000 | ||
| 2" | 30 | 1/32" | Acrylic Plastic | -40 to 220 | Yes | Red, Yellow | 6970T331 | 00000 | ||
| 2" | 60 | 1/32" | Acrylic Plastic | -40 to 220 | Yes | Red, Yellow | 6970T24 | 00000 | ||
| 4" | 30 | 1/32" | Acrylic Plastic | -40 to 220 | Yes | Red, Yellow | 6970T191 | 00000 | ||
| 4" | 60 | 1/32" | Acrylic Plastic | -40 to 220 | Yes | Red, Yellow | 6970T25 | 000000 | ||
| 6" | 30 | 1/32" | Acrylic Plastic | -40 to 220 | Yes | Red, Yellow | 6970T261 | 00000 | ||
| 6" | 60 | 1/32" | Acrylic Plastic | -40 to 220 | Yes | Red, Yellow | 6970T26 | 000000 | ||
| 12" | 15 | 1/32" | Acrylic Plastic | -40 to 220 | Yes | Red, Yellow | 6970T11 | 00000 | ||
| 18" | 15 | 1/32" | Acrylic Plastic | -40 to 220 | Yes | Red, Yellow | 6970T12 | 00000 | ||
| 24" | 15 | 1/32" | Acrylic Plastic | -40 to 220 | Yes | Red, Yellow | 6970T14 | 000000 | ||
