McMaster-Carr logo
    Filter by
    Body Material
    System of Measurement
    Thread Size
    Industrial Info Compare
    Fitting Connection
    Removes Particle Size Down To
    Maximum Air Back Pressure
    Fitting Material
    Enclosure Rating
    Screen Material
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    O-Ring Material
    Filter Material
    Industrial Info Compare
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    9 Products

    Washdown Weather Resistant Breather Vents

    These breather vents are rated NEMA 6 to withstand periodic submersion in water. Install them in enclosures to stop the buildup of pressure and vacuum and to prevent debris from entering equipment. Breather vents can be used with enclosures that are rated NEMA 4, 12, and 13 for washdown environments and splashing oil and coolant.
    Threaded UNF Male
    Image of Product. Bottom orientation. Breather Vents. Washdown Weather Resistant Breather Vents, Threaded UNF Male, Aluminum Body.

    Aluminum

    Body

    Thread
    Size
    Max. Flow Rate
    @ Pressure
    Max. Pressure,
    psi
    Max. Temp.,
    ° F
    Ht.
    Dia.
    For Use
    With
    Environment
    Enclosure
    Rating
    O-Ring
    Material
    Removes Particle
    Size Down To, μm
    Each
    Aluminum Body and Fitting
    10-32
    		Not Rated1.41581/4"3/8"AirDusty, Outdoor, Submersible, Washdown, WetNEMA 6
    		EPDM
    		30000000000000
     
    Threaded Metric Male
    Image of Product. Front orientation. Breather Vents. Washdown Weather Resistant Breather Vents, Threaded Metric Male, Aluminum Body.

    Aluminum

    Body

    Thread
    Size
    Max. Flow Rate
    @ Pressure
    Max. Pressure,
    psi
    Max. Temp.,
    ° F
    Ht.
    Dia.
    For Use
    With
    Environment
    Enclosure
    Rating
    O-Ring
    Material
    Removes Particle
    Size Down To, μm
    Each
    Aluminum Body and Fitting
    M8
    		Not Rated1.41589/16"9/16"AirDusty, Outdoor, Submersible, Washdown, WetNEMA 6
    		EPDM
    		30000000000000
    M20
    		Not Rated1.41581"1 1/8"AirDusty, Outdoor, Submersible, Washdown, WetNEMA 6
    		EPDM
    		1000000000000
     

    Lockable Breather Vents with Cap

    Secure access to vented openings in pipe and tanks—the cap can be locked to prevent tampering. These breather vents allow you to add a filling port to your hydraulic tank while protecting against excess pressure and vacuum. Use them to stop debris from entering your tank. Breather vents mount on top of standard tank openings with included hardware. Padlock is not included.
    Threaded NPT Male
    Image of Product. Bottom orientation. Breather Vents. Lockable Breather Vents with Cap, Threaded NPT Male, Aluminum Body.

    Aluminum Body

    Pipe
    Size
    Max.
    Pressure
    Max. Temp.,
    ° F
    Ht.
    Dia.
    For Use With
    Cap
    Material
    Screen
    Material
    For Max. Padlock
    Shackle Dia.
    Each
    Aluminum Body and Fitting
    2
    		Not Rated2004 1/2"5 5/8"Air, Oil, WaterAluminum
    		Stainless Steel
    		3/8"0000000000000
     

    Diesel Fuel Tank Caps

    Image of Product. Front orientation. Fuel Caps. Diesel Fuel Tank Caps, Fuel Caps with Vent.

    Fuel Caps

    with Vent

    Often used with trailers, compressors, and other equipment tanks, these caps meet Department of Transportation requirements. Caps have fusible plugs that will melt when the outside environment reaches their opening temperature.
    Fuel Caps with Vent—Cap with vent will automatically open when the internal pressure reaches between 6.5 psi to 8.5 psi to relieve pressure.
    Chain
    Lg.
    Bail
    Lg.
    Seal
    Material
    Pipe
    Size
    Gender
    Opening
    Temp., ° F
    Specs. Met
    Message
    Each
    Aluminum
     
    Fuel Caps with Vent
    6"4 1/2"Buna-N
    		2
    		Female255D.O.T. Compliant 49 CFR 393.67Diesel Fuel Only000000000000
     

    Expansion Plugs with Bypass

    Image of Product. Front orientation. Expansion Plugs. Expansion Plugs with Bypass, Style A.

    Style A

    Use the bypass tube on these plugs to add air, water, and other fluid to your pipeline or to relieve pressure while testing. The seal expands to temporarily close off pipe openings.
    Style A—For Style A, twist the wing nut to expand the seal. They have an NPS threaded bypass for routing moderately pressurized fluids.
    Maximum Air Back Pressure—Maximum air back pressure is the amount of pressure a plug can withstand without moving.
    Maximum Water Back Pressure—Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.
    For
    Pipe
    Max. Back
    Pressure
    Material
    Bypass
    Size
    ID
    Air,
    psi
    Water, ft.
    of head
    Overall
    Ht.
    Temp. Range,
    ° F
    Seal
    Bypass
    Cap
    Pipe
    Size
    Thread
    Type
    Gender
    Each
    Style A
     
    Aluminum Stem
    1 1/2
    		1.53" to 2.25"1252888 1/4"-20 to 170Natural Rubber
    		Metal3/8
    		NPS
    		Male0000000000000
    2
    		1.79" to 2.38"1252888 1/4"-20 to 170Natural Rubber
    		Metal3/8
    		NPS
    		Male000000000000
    3
    		2.77" to 3.25"1252888 1/4"-20 to 170Natural Rubber
    		Metal3/8
    		NPS
    		Male000000000000
    4
    		3.85" to 4.25"35818 1/4"-20 to 170Natural Rubber
    		Metal1/2
    		NPS
    		Male000000000000
     
    back to top