Filter by
System of Measurement
Material
Temper Designation
Tolerance Rating
Specifications Met
Mechanical Finish
Mechanical Finish Location
Hardness Rating
Yield Strength
Appearance
Elongation
Heat Treatment
Performance
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
Maximum Temperature
Minimum Temperature
Heat Treatable
Hardness
About Aluminum
Compare over 20 aluminum alloys to find the right material for you—all with material certificates for traceability.
Tight-Tolerance High-Strength 2024 Aluminum Sheets and Bars
- Yield Strength: 47,000 psi
- Hardness: Brinell 120 (Medium)
- Temper: T351
- Fabrication: Hot Rolled
- Specifications Met: ASTM B209, SAE AMS-QQ-A-250/4, SAE AMS4035
Also known as flat stock, these sheets and bars are precision ground on the top and bottom. The sides have a cut or milled edge. While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Thick. | Thick. Tolerance | Heat Treatment | Temperature Range, °F | Flatness Tolerance | 2" × 12" | 4" × 12" | 6" × 12" | 6" × 24" | 8" × 8" | 12” × 12” | 12” × 24” | 18" × 18" | 24” × 24” | |
| 1/4" | -0.002" to 0.002" | Hardened | -320° to 300° | 0.010" | 0000000 | |||||||||
| 3/8" | -0.002" to 0.002" | Hardened | -320° to 300° | 0.010" | 0000000 | |||||||||
| 1/2" | -0.002" to 0.002" | Hardened | -320° to 300° | 0.005" | 0000000 | |||||||||
| 1" | -0.002" to 0.002" | Hardened | -320° to 300° | 0.005" | 0000000 |