Filter by
DFARS Compliance
Certification
About Safety Ratings for Electrical Testing
More
Current-Sensing Test Leads
Measure current without interrupting the circuit by connecting these test leads to a multimeter or current meter.
The connection end is a 4 mm banana plug, which is the standard for connecting to a multimeter or current meter.
These test leads step down the sensed current to a level that works with a multimeter or current meter—the signal reduction ratio is the factor by which they reduce current.
Test Leads
Current Loop
Current Clamp
| Test End | For Max. Cord Dia. | Connection End | AC Current, A | DC Current, A | Current Accuracy | Voltage Output Signal Per Amp Supplied | For Current Range, A | AC Voltage | Safety Rating | Frequency Range | Jaw Opening | Loop Opening | Cord Lg. | Batteries Required | Batteries Included | Each | |
Measures AC Current | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flexible Current Loop | __ | Sheathed Banana Plug | 5-3,000 | __ | 1% | 10.000 mV AC, 1.000 mV AC, 1.000 mV DC | 5-300, 50-3,000 | 1,000 | CAT IV, 600V | 40 Hz-5 kHz | __ | 7.6" | 78" | Yes | Yes | 0000000 | 0000000 |
Measures AC Current and DC Current | |||||||||||||||||
| Current Clamp | 1.22" | Sheathed Banana Plug | 0-1,000 | 0-1,000 | 1% | 1.000 mV AC, 1.000 mV DC | 0-200, 0-1,000 | 300 | CAT III, 300V | 0 Hz-10 kHz | 1.25" | __ | 59" | Yes | Yes | 00000000 | 000000 |
Fluke Test Leads
Fluke Current Clamp
| Manufacturer Model Number | Test End | For Max. Cord Dia. | Connection End | AC Current, A | Current Accuracy | Current Output Signal Per Amp Supplied | For Current Range, A | AC Voltage | Safety Rating | Frequency Range | Jaw Opening | For Fluke Model Number | Cord Lg. | Batteries Required | Each | |
Measures AC Current | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| i400 | Current Clamp | 1.25" | Sheathed Banana Plug | 1-400 | 2% | 1.000 mA | 1-400 | 1,000 | CAT IV, 600V | 5 Hz-20 kHz | 1.25" | 27 II, 28 II, 77IV, 83V, 87V, 179, 287, 289, 787, 789, 1577, 1587 | 59" | No | 0000000 | 0000000 |
Line Splitters for Clamp-On Multimeters
Determine how much current a device with a two- or three-wire power cord uses without pulling apart the wires. The splitter isolates hot and neutral wires so you can measure AC current in either wire with a clamp-on multimeter.
| Max. AC Current, A | For No. of Wires | Safety Rating | Specifications Met | Each | |
| 15 | 2, 3 | CAT II, 600V | UL Listed, C-UL Listed | 0000000 | 000000 |