Toggle Bolt Anchor Assortments for Drywall, Plaster, and Wood Paneling
A wing-like toggle holds against the back of the material and spreads the force over a large area to hold 30 lbs. or more. The bolt is reusable, but the toggle will fall behind the wall when the bolt is removed. To install, insert the bolt through your fixture and thread the toggle onto it. Next, fold the toggle wings flush against the bolt and push them through a drilled hole until they pop open on the other side. Pull back on the bolt and tighten. Bolts are zinc-plated steel to resist corrosion in wet environments.
Number of Pieces | Toggle Bolts Included | Container Type | Each | |
Zinc-Plated Steel | ||||
---|---|---|---|---|
100 | 1/8" × 3" Lg. (25 Pieces) 1/8" × 4" Lg. (25 Pieces) 3/16" × 3" Lg. (15 Pieces) 3/16" × 4" Lg. (15 Pieces) 1/4" × 3" Lg. (10 Pieces) 1/4" × 4" Lg. (10 Pieces) | Plastic Box | 000000000 | 0000000 |
Removable-Screw Anchor Assortments
for Drywall, Plaster, and Wood Paneling
Drill-In | |
Hammer-In |
Use these light duty anchors to hold 20 lbs. or less. Once installed, screws can be removed repeatedly without affecting the anchor. Install flush with the surface. Then, thread the screw through your fixture, into the anchor, and tighten. For high volume tasks, use an optional installation tool—it doesn't require any twisting.
Number of Pieces | Hammer-In Drywall Anchors Included | Drill-In Drywall Anchors Included | Container Type | Each | |
Steel | |||||
---|---|---|---|---|---|
230 | 6-32 × 1 5/16" (50 Pieces) 6-32 × 1 11/16" (25 Pieces) 6-32 × 2 1/4" (25 Pieces) | 6-32 × 1" (25 Pieces) 6-32 × 1 1/2" (25 Pieces) 6-32 × 2" (25 Pieces) 6-32 × 2 1/2" (20 Pieces) 10-24 × 2 1/4" (10 Pieces) 10-24 × 2 3/4" (10 Pieces) 1/4"-20 × 2 1/4" (10 Pieces) 1/4"-20 × 2 3/4" (5 Pieces) | Plastic Box | 000000000 | 0000000 |
Optional Installation Tool | 000000000 | Each | 000000 |
Tapping Screw Assortments for Concrete, Block, and Brick
Also known as Tapcons, these screws are often used to anchor parts to concrete, block, and brick. Screws have a hex head that allows for a secure grip with a wrench. Drive them into a hole with a hammer drill or socket wrench, or use a specialized installation tool (sold separately). Made from corrosion-resistant-coated steel, they resist corrosion in wet environments. Length is measured from under the head.
Number of Pieces | Hex Head Screws Included | Tools Included | Container Type | Each | |
Blue Corrosion-Resistant-Coated Steel | |||||
---|---|---|---|---|---|
For Hammer Drill | |||||
176 | 1/4" × 1 1/4" Lg. (50 Pieces) 1/4" × 1 3/4" Lg. (50 Pieces) 1/4" × 2 1/4" Lg. (50 Pieces) 1/4" × 2 3/4" Lg. (25 Pieces) | Drill Bit | Plastic Box | 000000000 | 000000 |
For Rotary Drill | |||||
176 | 1/4" × 1 1/4" Lg. (50 Pieces) 1/4" × 1 3/4" Lg. (50 Pieces) 1/4" × 2 1/4" Lg. (50 Pieces) 1/4" × 2 3/4" Lg. (25 Pieces) | Drill Bit | Plastic Box | 000000000 | 00000 |
Includes | Each | |
5/16" Hex Socket No. 2 Socket 1/4" Hex Socket 1/8" Hex Key Drill Adapter 1/2" dia. × 6" lg. Drive Sleeve | 000000000 | 0000000 |