We will reply to your message within an hour.
Keep fixtures solidly in place—these anchors have two locking wedges that won't shake loose.
A zinc plating provides corrosion resistance in wet environments.
These 18-8 stainless steel anchors have good chemical resistance.
The removable flat head provides a flush finish in countersunk holes.
These 316 stainless steel anchors have excellent resistance to chemicals and salt water.
Often referred to as four-way expansion anchors, these expand in four directions to resist loosening from vibration.
Also known as caulk-in anchors, these stay secure when there's not much material to hold.
Drive these tools with a hammer to expand anchors.
Also known as double expansion anchors, these expand from both sides for full contact and a secure hold.
Use in applications requiring high strength.
Bolts are beveled under the head for a flush finish in countersunk holes.
A hex head allows for a secure grip with a wrench.
For narrow holes and small cavities where toggle anchors won't fit.
These stud-style anchors include a nut and a washer.
Use these stud-style anchors with nuts.
High-strength toggle anchors provide an extremely strong hold and stay in position when a bolt is removed.
A spring-loaded toggle holds against the back of the material.
About half the strength of medium-strength bolts, these bolts are for light duty work-holding.
18-8 stainless steel studs have good chemical resistance and may be mildly magnetic. Also known as hanger bolts, use them to hang, mount, and fasten parts to wood structures.
These studs are also known as hanger bolts—use them to hang, mount, and fasten parts to wood structures.
Attach these clamps to the flange of an beam, then hang a threaded rod from the threaded hole.
Also known as conduit hangers, these hangers load from the bottom so you can add or remove material without removing the mounted hanger.
Route multiple lines of pipe, tubing, and conduit with a single hanger. A wide opening and locking tab allow access for installation, adjustment, and removal.
Mount these general purpose U-bolts into an existing bracket, or combine with a mounting plate for a secure hold at the mounting surface.
A mounting plate provides a more secure hold at the mounting surface.
Add a mounting plate to your U-bolt for a more secure hold at the mounting surface.
Also known as muffler clamps, these U-bolts have a rounded mounting plate that fully surrounds pipe, conduit, and tubing for a secure fit.
Mount these ringbolts into a threaded hole, or use the nut for through-hole mounting. The pivoting ring allows material to move freely.
Clamp onto metal tubes such as pipe, scaffolding, and railing to hang lighting fixtures, threaded rod, and equipment.
Wind rope around these cleats for a secure hold.
Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back to compensate for roll and sway when lifting heavy or unbalanced loads.
The ball bearing on these hoist rings makes it easy to rotate your load even after it’s suspended.
Choose these hoist rings when you need to lift your load from the side.
The fixed base provides added stability and allows you to lift heavy loads with smaller thread sizes.
Keep on hand all the parts needed to assemble custom hoist rings.
With three different thread sizes, these hoist rings are useful when you need to lift different types of equipment.
Also known as nut eyebolts, these are designed for through-hole applications.
Also known as socket-end swage fittings, install these stud-end fittings with a roller swage press for a strong, permanent hold.
Threads on one end make it easy to screw these hooks directly into a wall.
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
Weld these stubs to parts or use them to push objects apart instead of pulling them together.