About Lifting with Hoist Rings
More
Selecting U-Bolts Using Pipe, Conduit, or Tubing Trade Size
More
About Threaded Studs and Rods
More
High-Strength Toggle Anchors
These high-strength toggle anchors provide an extremely strong hold and stay in position when a bolt is removed. To install, push the toggle through a drilled hole and pull the anchor back toward you until the toggle rests flush against the wall. Then, slide the cap up to the wall and snap off the straps. Next, position your fixture, insert a screw and tighten. For use with machine screws; minimum screw length is the wall and fixture thicknesses plus 1/2". Pull-out strength and shear strength values are 25% of the ultimate values.
Zinc-plated steel toggle anchors resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Strength, lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Thread Size  | Thread Pitch, mm | Usable Lg. Range | Wing Span | Drill Bit Size | Material | Color | Pull-Out | Shear | Tested In | For Use In | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel Toggle | |||||||||||||
| M10 | 1.5 | 10mm-64mm | 51mm | 19 mm | Polystyrene Plastic | White | 400 | 400 | Hollow Concrete Block | Drywall, Hollow Block, Plaster, Wood Paneling | 5 | 000000000 | 000000 |
Metric Stainless Steel Wood Screw Threaded Studs
316 stainless steel studs have excellent resistance to chemicals and salt water and may be mildly magnetic. Also known as hanger bolts, use them to hang, mount, and fasten parts to wood structures. Install with a stud driver or create wrench flats by threading two nuts onto the stud and jamming them together.
For technical drawings and 3-D models, click on a part number.
Parallel Beam-to-Beam Clamps
Join two beams in a straight line without drilling or welding. The bolt can be removed to insert threaded rod.
Zinc-plated iron clamps have mild corrosion resistance. Galvanized iron clamps have better corrosion resistance than zinc-plated iron clamps.
For technical drawings and 3-D models, click on a part number.
Beam Clamps for Threaded Rod
Attach these clamps to the flange of a beam, then hang a threaded rod from the threaded hole.
Styles D, E, and H have a threaded hole on the back for supporting a hanger or routing ring.
Zinc-plated iron clamps have mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Style | For Beam Shape | For Thread Size | For Thread Pitch, mm | For Max. Beam Thick. | Capacity, lbs. | Mount Type | Throat Dp. | Lg. | Wd. | Ht. | Threaded Rod Included | Each | |
Zinc-Plated Iron | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| E | Flat, Tapered | M10 | 1.5 | 3/4" | 525 | Clamp On | 1/2" | 1 5/8" | 1 5/8" | 1 3/4" | No | 000000 | 000000 |
Clamping U-Bolts
Also known as muffler clamps, these U-bolts have a rounded mounting plate that fully surrounds pipe, conduit, and tubing for a secure fit. Stronger than routing clamps and hangers, U-bolts support heavy pipe, tube, and conduit from ceilings, walls, and poles.
Zinc-plated steel U-bolts have good corrosion resistance in most environments.
U-bolts with four nuts allow you to secure the U-bolt from the top and the bottom.
For technical drawings and 3-D models, click on a part number.
ID | Thread | Mounting Plate | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | For Pipe Size | Ht. | Lg. | Pitch, mm | Ctr.-to-Ctr. | Material | Color | Lg. | Wd. | Thick. | No. of Nuts Included | Temp. Range, °F | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||||||||||
M10 Thread Size | ||||||||||||||||
| 1 3/16" | 30 | 3/4 | 2 3/8" | 1 5/8" | 1.5 | 1 9/16" | Plastic | Black | 2 15/16" | 1 3/16" | 1/2" | 4 | -20° to 190° F | 1 | 0000000 | 00000 |
| 1 1/2" | 38 | 1 | 2 9/16" | 1 5/8" | 1.5 | 1 7/8" | Plastic | Black | 3 1/8" | 1 3/16" | 1/2" | 4 | -20° to 190° F | 1 | 0000000 | 0000 |
| 1 13/16" | 46 | 1 1/4 | 3" | 2" | 1.5 | 2 3/16" | Plastic | Black | 3 9/16" | 1 3/16" | 1/2" | 4 | -20° to 190° F | 1 | 0000000 | 0000 |
| 2 1/16" | 52 | 1 1/2 | 3 1/4" | 2" | 1.5 | 2 7/16" | Plastic | Black | 3 3/4" | 1 3/8" | 19/32" | 4 | -20° to 190° F | 1 | 0000000 | 0000 |
Hoist Rings—For Lifting
Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
Machined hoist rings have a smooth finish to protect slings and hooks from damage and excess wear during lifting.
Black-oxide steel hoist rings have mild corrosion resistance.
Nickel-plated steel hoist rings are more corrosion resistant than black-oxide steel hoist rings.
17-4 PH stainless steel hoist rings are more corrosion resistant than steel hoist rings.
316 stainless steel hoist rings are the most corrosion resistant.
High-visibility hoist rings are fluorescent green, so they’re easy to distinguish from other hardware when attached to equipment being lifted.
Hoist rings that are CE marked meet European safety standards.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Pitch, mm | Thread Lg., mm | Inside Wd., mm | Overall Ht., mm | Vertical Capacity, lbs. | Movement | Specifications Met | Each | |
Forged Black-Oxide Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| M10 | 1.5 | 16 | 33 | 98 | 975 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
| M10 | 1.5 | 26 | 33 | 108 | 975 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 00000 |
Machined Black-Oxide Steel | |||||||||
| M10 | 1.5 | 18 | 21 | 86 | 975 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
Forged Fluorescent Green Powder-Coated Steel—High Visibility | |||||||||
| M10 | 1.5 | 16 | 33 | 98 | 450 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Forged Nickel-Plated Steel | |||||||||
| M10 | 1.5 | 16 | 33 | 98 | 975 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Machined Nickel-Plated Steel | |||||||||
| M10 | 1.5 | 18 | 21 | 86 | 975 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Forged 17-4 PH Stainless Steel | |||||||||
| M10 | 1.5 | 15 | 38 | 106 | 975 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Machined 316 Stainless Steel | |||||||||
| M10 | 1.5 | 18 | 22 | 86 | 550 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Swivel-Under-Load Hoist Rings—For Lifting
The ball bearing on these hoist rings makes it easy to rotate your load even after it’s suspended. For unbalanced or heavy loads, the base also swivels to compensate for pitch, roll, and sway. Their lifting ring pivots 180° front to back. Ideal for angular lifting, these hoist rings withstand stresses that bend or break eyebolts.
Install the base of these hoist rings flush to your mounting surface. Use a torque wrench to tighten to the recommended torque stamped on the ring.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Pitch, mm | Thread Lg., mm | Inside Wd., mm | Overall Ht., mm | Vertical Capacity, lbs. | Movement | Specifications Met | Each | |
Yellow Powder-Coated Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| M10 | 1.5 | 20 | 35 | 145 | 1,760 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked | 0000000 | 0000000 |
Side-Mount Hoist Rings—For Lifting
Choose these hoist rings when you need to lift your load from the side. Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
D-shape hoist rings have a wider end than triangle hoists, so it’s easier to attach webbing and large hooks.
Triangle hoist rings have a narrow end to keep chain in place.
Black-oxide steel hoist rings have mild corrosion resistance.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Pitch, mm | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity, lbs. | Movement | Specifications Met | Each | |
D-Shape | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Steel | |||||||||
| M10 | 1.5 | 20mm | 45mm | 101mm | 1,100 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked | 00000000 | 000000 |
Black-Oxide Steel | |||||||||
| M10 | 1.5 | 24mm | 74mm | 154mm | 990 | 180° Pivot and 360° Swivel | ASME B30.26 | 0000000 | 000000 |
Triangle | |||||||||
Black-Oxide Steel | |||||||||
| M10 | 1.5 | 24mm | 38mm | 144mm | 990 | 180° Pivot and 360° Swivel | ASME B30.26 | 0000000 | 000000 |
Multi-Thread Hoist Rings—For Lifting
With three different thread sizes, these hoist rings are useful when you need to lift different types of equipment. All have a black-oxide finish for mild corrosion resistance.
To install, screw in one of the threaded studs until the base of these hoist rings is flush to your mounting surface. You can leave the base installed and only remove the shackle to save time during your next use.
Warning: These hoist rings are for vertical lifting only. Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Pitch | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity | Specifications Met | Each | |
Black-Oxide Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| M8 M10 M12 | 1.25mm 1.50mm 1.75mm | 13mm 13mm 13mm | 29.4mm | 90.8mm | 880 lbs. 990 lbs. 2,310 lbs. | ASME B30.26 | 0000000 | 0000000 |
Quick-Release Hoist Rings—For Lifting
Easily slip these hoist rings in and out of threaded holes by pushing the button to retract their threads. Install them flush to your mounting surface. Ideal for angular lifting, these hoist rings withstand stresses that break or bend eyebolts.
All are CE marked, so they meet European safety standards.
The ring on 180° pivot hoist rings moves from front to back. Their base does not swivel for added stability.
180° pivot and 360° swivel hoist rings not only have a ring that moves from front to back, but their base also swivels to handle pitch, roll, and sway when lifting heavy or unbalanced loads.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Corrosion-Resistant Extension Spring Stud Anchors
These stainless steel anchor studs offer excellent corrosion resistance. Attach an extension spring to a stud and then thread the stud into your part for a secure connection.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Min. Lg., mm | Lg., mm | Dia., mm | Hole Dia., mm | Material | Anchor Type | Each | |
| M10 | 1.5 | 28 | 41 | 10 | 6 | 18-8 Stainless Steel | Stud | 000000000 | 000000 |
Extension Spring Stud Anchors
A black-oxide finish provides these steel anchors with mild corrosion resistance. Attach an extension spring to a stud and then thread the stud into your part for a secure connection.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Min. Lg., mm | Lg., mm | Dia., mm | Hole Dia., mm | Material | Each | |
| M10 | 1.5 | 28 | 41 | 10 | 6 | Black-Oxide Steel | 0000000 | 00000 |
Corrosion-Resistant Swiveling Extension Spring Stud Anchors
These stainless steel anchor studs offer excellent corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to a stud and then thread the stud into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Min. Lg., mm | Lg., mm | Dia., mm | Hole Dia., mm | Hex Size, mm | Material | Each | |
| M10 | 1.5 | 28 | 41 | 10 | 6 | 3 | 18-8 Stainless Steel | 000000000 | 000000 |
Swiveling Extension Spring Stud Anchors
A black-oxide finish provides these steel anchors with mild corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to a stud and then thread the stud into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Min. Lg., mm | Lg., mm | Dia., mm | Hole Dia., mm | Hex Size, mm | Material | Each | |
| M10 | 1.5 | 28 | 41 | 10 | 6 | 3 | Black-Oxide Steel | 000000000 | 000000 |