We will reply to your message within an hour.
With shaft diameters of 3/8" and larger, these gear boxes transmit higher speeds and greater torque than Compact Right-Angle Gear Boxes.
Shaft diameters range from 5 to 35 mm.
For small machinery and tight spots, these gear boxes have 1/4" diameter and smaller shafts and a footprint of less than 2½" square.
The input and output shafts are positioned at the same height, so these speed reducers take up less than half the vertical space as our standard right-angle speed reducers.
Adjust shaft speed and torque for use in low-speed, high-torque applications.
Mount these speed reducers to a NEMA 56C motor.
With output shaft openings on both sides, these speed reducers adapt to fit multiple configurations. Mount to a NEMA 56C motor.
With a sanitary design for food-processing environments, these speed reducers mount to the face of your motor—no coupler required—to slow shafts and increase torque while transmitting motion at a 90° angle.
Mount right-angle speed reducers to machinery or other surfaces where access from the bottom is not possible.
Convert output drives from female to male.
Cut shaft speed and increase torque while transmitting motion at a 90° angle in food, pharmaceutical, and other sanitary environments.