McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    112 Products

    Bent-Head Clevis Pins

    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Bent-Head Clevis Pins.
    Slightly curved, these pins take up less space than a loop grip or T-handle while still giving you something to grab. The bent head also acts as a stop so the pin can’t be pulled out from the other end. To secure, slide a cotter pin into the hole.
    Steel
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Usable
    Lg.
    Dia. Tolerance
    For Max.
    Cotter Pin Dia.
    Min.
    Hardness
    Each
    Zinc-Plated Carbon Steel with Cotter Pin
     
    5/16" Diameter
    2 1/2"-0.003" to 0.000"7/64"Not Rated90146A05900000
    3"-0.003" to 0.000"7/64"Not Rated90146A0630000
     
    3/8" Diameter
    2 1/2"-0.003" to 0.000"7/64"Not Rated90146A0670000
    3"-0.003" to 0.000"7/64"Not Rated90146A0710000
    3 1/2"-0.003" to 0.000"1/16"Not Rated90146A2360000
    4"-0.010" to 0.000"1/8"Not Rated90146A2050000
     
    1/2" Diameter
    2 1/2"-0.010" to 0.000"1/8"Not Rated90146A2100000
    3"-0.010" to 0.000"1/8"Not Rated90146A2110000
    4"-0.010" to 0.000"9/64"Not Rated90146A2120000
    4 1/2"-0.003" to 0.000"1/8"Not Rated90146A2370000
    5"-0.003" to 0.000"7/64"Not Rated90146A0900000
    6"-0.003" to 0.000"1/8"Not Rated90146A2380000
    8"-0.003" to 0.000"1/8"Not Rated90146A2390000
     
    5/8" Diameter
    3"-0.010" to 0.000"9/64"Not Rated90146A2130000
    4"-0.010" to 0.000"3/32"Not Rated90146A1000000
    5"-0.003" to 0.000"7/64"Not Rated90146A1050000
    6"-0.003" to 0.000"9/64"Not Rated90146A24000000
    8"-0.003" to 0.000"9/64"Not Rated90146A24100000
     
    3/4" Diameter
    3 1/2"-0.010" to 0.000"9/64"Not Rated90146A2140000
    4 1/2"-0.010" to 0.000"9/64"Not Rated90146A2150000
    5"-0.003" to 0.000"9/64"Not Rated90146A24200000
    6"-0.003" to 0.000"9/64"Not Rated90146A24300000
    8"-0.003" to 0.000"9/64"Not Rated90146A24400000
    10"-0.003" to 0.000"9/64"Not Rated90146A24500000
     
    1" Diameter
    4 3/4"-0.010" to 0.000"11/64"Not Rated90146A22100000
    5"-0.003" to 0.000"11/64"Not Rated90146A24600000
    6"-0.003" to 0.000"11/64"Not Rated90146A24700000
    6 3/4"-0.010" to 0.000"11/64"Not Rated90146A23300000
    8"-0.003" to 0.000"11/64"Not Rated90146A24800000
    10"-0.003" to 0.000"11/64"Not Rated90146A24900000
     
    Corrosion-Resistant Stainless Steel
    18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They're strong enough to fasten most components but won't withstand stress and vibration as well as steel.
    Usable
    Lg.
    Dia. Tolerance
    For Max.
    Cotter Pin Dia.
    Min.
    Hardness
    Each
    18-8 Stainless Steel with Cotter Pin
     
    3/8" Diameter
    3"-0.003" to 0.000"3/32"Rockwell B8394563A57100000
     
    1/2" Diameter
    3"-0.003" to 0.000"5/32"Rockwell B8394563A81100000
    4"-0.003" to 0.000"5/32"Rockwell B8394563A81200000
    5"-0.003" to 0.000"5/32"Rockwell B8394563A89000000
     
    5/8" Diameter
    3"-0.003" to 0.000"13/64"Rockwell B8394563A91300000
    4"-0.003" to 0.000"13/64"Rockwell B8394563A92000000
    5"-0.003" to 0.000"13/64"Rockwell B8394563A93500000
     
    3/4" Diameter
    3 1/2"-0.003" to 0.000"13/64"Rockwell B8394563A97400000
    4 1/2"-0.003" to 0.000"13/64"Rockwell B8394563A97500000
     

    Selectable-Length Bent-Head Clevis Pins

    Change the usable length in 1/4" increments by inserting a cotter pin into one of the holes. These pins are often used as replacement parts when you don't have the exact pin you need on hand. The bent head gives you a better grip than flat-head pins and acts as a stop so the pin can’t be pulled out from the other end.
    The excess length can be cut off after installation.
    Steel
    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Selectable-Length Bent-Head Clevis Pins.
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Usable Lg.
    Dia.
    Tolerance
    For Max.
    Cotter Pin Dia.
    No. of
    Holes
    Min.
    Hardness
    Lg.
    Each
    Zinc-Plated Carbon Steel with Cotter Pin
     
    3/8" Diameter
    2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4", 4"-0.005" to 0"5/32"7Not Rated4"90369A11100000
    4 1/2", 4 3/4", 5", 5 1/4", 5 1/2", 5 3/4", 6"-0.005" to 0"5/32"7Not Rated6"90369A1120000
     
    1/2" Diameter
    2 1/2", 2 3/4", 3", 3 1/4", 3 1/2", 3 3/4", 4"-0.005" to 0"5/32"7Not Rated4"90369A1130000
    4 1/2", 4 3/4", 5", 5 1/4", 5 1/2", 5 3/4", 6"-0.005" to 0"5/32"7Not Rated6"90369A1140000
     
    5/8" Diameter
    2 1/8", 2 7/16", 2 3/4", 3 1/16", 3 3/8", 3 11/16", 4"-0.005" to 0"13/64"7Not Rated4"90369A1150000
    4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6"-0.005" to 0"13/64"7Not Rated6"90369A1160000
     
    3/4" Diameter
    2 1/8", 2 7/16", 2 3/4", 3 1/16", 3 3/8", 3 11/16", 4"-0.005" to 0"13/64"7Not Rated4"90369A1170000
    4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6"-0.005" to 0"13/64"7Not Rated6"90369A11800000
     
    1" Diameter
    4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6"-0.005" to 0"13/64"7Not Rated6"90369A11900000
    6 1/8", 6 7/16", 6 3/4", 7 1/16", 7 3/8", 7 11/16", 8"-0.005" to 0"13/64"7Not Rated8"90369A12000000
     
    1 7/32" Diameter
    6 1/8", 6 7/16", 6 3/4", 7 1/16", 7 3/8", 7 11/16", 8"-0.005" to 0"13/64"7Not Rated8"90369A12100000
     
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Selectable-Length Bent-Head Clevis Pins.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They're strong enough to fasten most components but won't withstand stress and vibration as well as steel.
    Usable Lg.
    Dia.
    Tolerance
    For Max.
    Cotter Pin Dia.
    No. of
    Holes
    Min.
    Hardness
    Lg.
    Each
    18-8 Stainless Steel with Cotter Pin
     
    1/2" Diameter
    4 1/2", 4 3/4", 5", 5 1/4", 5 1/2", 5 3/4", 6"-0.005" to 0"5/32"7Not Rated6"90369A122000000
     
    5/8" Diameter
    4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6"-0.005" to 0"13/64"7Not Rated6"90369A12300000
     
    3/4" Diameter
    4 1/8", 4 7/16", 4 3/4", 5 1/16", 5 3/8", 5 11/16", 6"-0.005" to 0"13/64"7Not Rated6"90369A12400000
     

    Hitch Pins

    Image of Product. Bent Head with Cotter Pin. Front orientation. Hitch Pins. Hitch Pins, Bent Head, Cotter.
    Image of Product. Bent Head with Toggle. Front orientation. Hitch Pins. Hitch Pins, Bent Head, Toggle.

    Bent Head with

    Cotter Pin

    Bent Head with

    Toggle

    These pins secure an insert to a receiver on a vehicle as part of a connection for towing.
    Stainless Steel—Stainless steel pins resist corrosion better in outdoor environments than steel pins.
    Toggle—Toggle hitch pins don’t require a cotter pin. Instead, the toggle swivels out of the way to insert them and then swivels back to secure them.
    Adapter Sleeve—Hitch pins with an adapter sleeve are compatible with three receiver sizes, so they’re handy if you have vehicles with different hitch sizes.
    For Hitch Receiver
    Height and Width
    Hitch Pin
    Style
    Dia.
    Lg.
    Includes
    Each
    Steel
     
    Bent Head
    1 1/4" SquareCotter1/2"4 1/4"—9031N1100000
    2" SquareCotter5/8"5"—2507T510000
    2" Square, 2 1/2" SquareCotter5/8"6"—9031N1200000
    2" Square, 2 1/2" Square, 3" SquareCotter5/8"6 1/16"Adapter Sleeve9031N1300000
     
    Stainless Steel
     
    Bent Head
    2" SquareCotter5/8"5 1/16"—9031N1500000
    2" SquareToggle5/8"5"—9031N1400000
     

    90° Angle Weld Studs

    Image of Attribute. Front orientation. Contains Annotated. Studs. 90° Angle Weld Studs.
    Weld these studs to flat surfaces in confined areas, narrow channels, and tight corners.
    Steel—Without a finish, these studs require minimal prep work before welding. After installation, you can paint them for a finished look.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these studs resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.
    Base
    Lg.
    Lg.
    Wd.
    Thk.
    Tensile
    Strength
    Hardness
    Pkg.
    Qty.
    Pkg.
    Steel
     
    6-32
    1/2"9/16"7/32"3/64"Not RatedNot Rated5094445A110000000
     
    8-32
    1/2"5/8"1/4"1/16"Not RatedNot Rated5094445A20000000
     
    10-24
    1/2"11/16"5/16"1/16"Not RatedNot Rated5094445A30000000
     
    10-32
    1/2"11/16"11/32"1/16"Not RatedNot Rated5094445A40000000
     
    1/4"-20
    1/2"3/4"3/8"3/32"Not RatedNot Rated2594445A4500000
    5/8"3/4"3/8"3/32"Not RatedNot Rated2594445A5000000
    3/4"3/4"3/8"3/32"Not RatedNot Rated2594445A5500000
    1"3/4"3/8"3/32"Not RatedNot Rated2594445A6000000
     
    18-8 Stainless Steel
     
    6-32
    3/8"9/16"7/32"3/64"Not RatedNot Rated2596466A11100000
    1/2"9/16"7/32"3/64"Not RatedNot Rated2596466A01000000
     
    8-32
    3/8"5/8"1/4"1/16"Not RatedNot Rated2596466A11200000
    1/2"5/8"1/4"1/16"Not RatedNot Rated2596466A02500000
    5/8"5/8"1/4"1/16"Not RatedNot Rated1096466A1130000
    3/4"5/8"1/4"1/16"Not RatedNot Rated1096466A1140000
    1"5/8"1/4"1/16"Not RatedNot Rated1096466A1160000
    1 1/4"5/8"1/4"1/16"Not RatedNot Rated1096466A1170000
    1 1/2"5/8"1/4"1/16"Not RatedNot Rated1096466A1180000
     
    10-24
    3/8"11/16"5/16"1/16"Not RatedNot Rated1096466A1190000
    1/2"11/16"5/16"1/16"Not RatedNot Rated1096466A0300000
    3/4"11/16"5/16"1/16"Not RatedNot Rated1096466A1230000
    1"11/16"5/16"1/16"Not RatedNot Rated1096466A1220000
    1 1/4"11/16"5/16"1/16"Not RatedNot Rated1096466A1240000
     
    10-32
    3/8"11/16"11/32"1/16"Not RatedNot Rated1096466A1250000
    1/2"11/16"11/32"1/16"Not RatedNot Rated1096466A0400000
    3/4"11/16"11/32"1/16"Not RatedNot Rated1096466A1260000
    1"11/16"11/32"1/16"Not RatedNot Rated1096466A1270000
    1 1/4"11/16"11/32"1/16"Not RatedNot Rated1096466A12800000
    1 3/4"11/16"11/32"1/16"Not RatedNot Rated1096466A12900000
     
    1/4"-20
    1/2"3/4"3/8"3/32"Not RatedNot Rated1096466A04500000
    5/8"3/4"3/8"3/32"Not RatedNot Rated1096466A05000000
    3/4"3/4"3/8"3/32"Not RatedNot Rated1096466A05500000
    7/8"3/4"3/8"3/32"Not RatedNot Rated1096466A13100000
    1"3/4"3/8"3/32"Not RatedNot Rated596466A0600000
    1 1/4"3/4"3/8"3/32"Not RatedNot Rated596466A1320000
    1 1/2"3/4"3/8"3/32"Not RatedNot Rated596466A1330000
    1 3/4"3/4"3/8"3/32"Not RatedNot Rated596466A1340000
     
    5/16"-18
    5/8"7/8"7/16"1/8"Not RatedNot Rated596466A1350000
    3/4"7/8"7/16"1/8"Not RatedNot Rated596466A1360000
    1"7/8"7/16"1/8"Not RatedNot Rated596466A1370000
    1 1/4"7/8"7/16"1/8"Not RatedNot Rated596466A1380000
    1 1/2"7/8"7/16"1/8"Not RatedNot Rated596466A13900000
    2"7/8"7/16"1/8"Not RatedNot Rated596466A14100000
     
    3/8"-16
    1"1"17/32"5/32"Not RatedNot Rated596466A14200000
    1 1/4"1"17/32"5/32"Not RatedNot Rated596466A14300000
    1 1/2"1"17/32"5/32"Not RatedNot Rated596466A14400000
     

    Circuit Board Headers

    Use these headers to make quick, temporary connections to development boards and other circuit boards when prototyping. Solder the termination contacts directly to your board, and use the mating contacts to transmit power and send signals to your equipment.
    Sold Individually
    Image of Product. Front orientation. Circuit Board Headers. Sold Individually, Male Header, 90° Angle Header.
    Image of Attribute. Front orientation. Contains Annotated. Sold Individually, Male Header.

    Male Header

    90° Angle Header

    Male Header

    Male Header—Choose male headers if you need to plug your board into something else, such as a separate circuit board or breadboard.
    90° Angle Header—90° angle headers fit snugly against circuit boards, creating a low-profile connection in tight spaces.
    No. of
    Total No. of
    Contact Points
    Rows
    Columns
    For Hole
    Ctr.-to-Ctr.
    Max. Current,
    amp
    Mating Contact
    Lg.
    Termination
    Contact Lg.
    Body
    Lg.
    Construction
    Temp. Range,
    ° F
    Each
    Male Header
     
    90° Angle Header
    401400.1"31/4"1/8"1/8"Breakaway-40 to 2214002N1600000
     

    Padlockable Bent-Head Clevis Pins

    Image of Product. Front orientation. Contains Annotated. Clevis Pins. Padlockable Bent-Head Clevis Pins.
    Prevent anyone without the key or combination from removing these pins. Often used to safeguard trailers against theft, they’re slightly curved so they can’t be pulled out from the other end. Add your own padlock to secure.
    Steel
    Corrosion-Resistant-Coated Carbon Steel—These pins combine the strength of steel with the rust resistance of stainless steel. Also known as black luster, the finish has been tested to extreme standards, including 1,000 hours of salt spray resistance, to hold up in wet and outdoor environments.
    Usable
    Lg.
    Dia. Tolerance
    For Max. Shackle
    Dia.
    Min.
    Hardness
    Each
    Black-Corrosion-Resistant-Coated Carbon Steel
     
    5/8" Diameter
    3"-0.005" to 0.005"5/16"Rockwell B8097228A100000000
    4"-0.005" to 0.005"5/16"Rockwell B8097228A20000000
     
    3/4" Diameter
    4 1/2"-0.005" to 0.005"5/16"Rockwell B8097228A40000000
     

    Hitch Pin Locks

    Image of Product. Front orientation. Hitch Pins. Hitch Pin Locks, Style A.

    Style A

    Image of Product. Front orientation. Hitch Pins. Hitch Pin Locks, Style B.

    Style B

    Secure trailers to vehicles by locking the hitch pin into the receiver—you can't disconnect the trailer without the key. Use them to prevent someone from stealing your trailer or moving it. Built to stand up to any weather, they're great for outdoor trailers. The lock body rotates around your hitch pin, so you can easily reach the key into the cylinder to unlock. A plastic cover protects the key cylinder from water and debris, so it won’t freeze, corrode, or jam.
    Style A—Style A lock from the side of your vehicle—access to the key cylinder is perpendicular to the hitch. These locks do not include a hole for a cotter pin. Made of steel, they’re stronger than stainless steel locks. Chrome plating adds corrosion resistance. The included cover is a separate piece.
    Style B—Style B lock from behind your vehicle—access to the key cylinder is parallel to the hitch. Made of stainless steel, they resist corrosion better than steel locks. The included cover is connected to the lock.
    Keyed Alike—Choose keyed alike locks if you need several locks that open with the same key.
    Keyed Differently—Choose keyed differently locks if you need locks that each open with a different key.
    For 1 1/4" Hitch Receiver Height—Locks for 1 1/4" hitch receivers fit class I and II hitches.
    For 2" Hitch Receiver Height—Locks for 2" square hitch receivers fit class III and IV hitches.
    For 2 1/2" Hitch Receiver Height— Locks for 2 1/2" square hitch receivers fit class III-V hitches.
    Material
    Style
    Keying
    For Hitch Receiver
    Height and Width
    Hitch Pin
    Style
    Dia.
    Lg.
    Pin
    Body
    No. of Keys
    Included
    Keyhole Cover
    Material
    Key
    No.
    Each
    AKeyed Differently1 1/4" SquareLocking1/2"7"Chrome-Plated SteelSteel2Plastic—6685A41000000
    AKeyed Differently2" Square, 2 1/2" SquareLocking5/8"7"Chrome-Plated SteelSteel2Plastic—6685A5200000
    BKeyed Alike2" SquareLocking1"6 1/4"Stainless SteelAnodized Aluminum2Plastic461577536N11100000
    BKeyed Differently2" SquareLocking1"6 1/4"Stainless SteelAnodized Aluminum2Plastic—7536N11200000
     
    back to top