Filter by
Shaft Diameter
For Load Direction
Width
Bearing Construction
Bearing Trade Number
Cage Material
Lubrication
Ring Material
Ball Material
Maximum Rotation Speed
RoHS
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Dynamic Combined Load Capacity
Static Combined Load Capacity
About Ball and Roller Bearings
More
Angular-Contact Thrust Ball Bearings
Open
Sealed
Shielded
Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.
Single-row bearings handle thrust loads on one side. For applications with thrust loads on both sides, mount them in pairs.
Double-row bearings handle thrust loads in both directions.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Combined Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number  | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Contact Angle | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
Single Row | ||||||||||||||
Open | ||||||||||||||
| 7001 | 12 | 28 | 8 | Steel | 1,200 | 590 | 31,000 | Required | 15° | -40° to 250° | ABEC-5 | DIN 628-1 | 00000000 | 0000000 |
| 7005 | 25 | 47 | 12 | Steel | 2,750 | 1,800 | 32,500 | Required | 15° | -40° to 250° | ABEC-5 | DIN 628-1 | 00000000 | 000000 |
| 7007 | 35 | 62 | 14 | Steel | 4,500 | 3,300 | 24,200 | Required | 15° | -40° to 250° | ABEC-5 | DIN 628-1 | 00000000 | 000000 |
| 7008 | 40 | 68 | 15 | Steel | 4,800 | 3,800 | 21,700 | Required | 15° | -40° to 250° | ABEC-5 | DIN 628-1 | 00000000 | 000000 |
| 7009 | 45 | 75 | 16 | Steel | 5,700 | 4,600 | 19,500 | Required | 15° | -40° to 250° | ABEC-5 | DIN 628-1 | 00000000 | 000000 |
| 7010 | 50 | 80 | 16 | Steel | 6,050 | 5,200 | 18,000 | Required | 15° | -40° to 250° | ABEC-5 | DIN 628-1 | 00000000 | 000000 |
| 7200 | 10 | 30 | 9 | Steel | 1,550 | 750 | 30,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 00000 |
| 7201 | 12 | 32 | 10 | Steel | 1,700 | 850 | 26,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 00000 |
| 7202 | 15 | 35 | 11 | Steel | 1,850 | 980 | 24,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 00000 |
| 7203 | 17 | 40 | 12 | Steel | 2,300 | 1,200 | 20,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 00000 |
| 7204 | 20 | 47 | 14 | Steel | 2,950 | 1,700 | 18,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 00000 |
| 7205 | 25 | 52 | 15 | Steel | 3,300 | 2,050 | 15,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 00000 |
| 7206 | 30 | 62 | 16 | Steel | 5,050 | 3,200 | 13,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
| 7207 | 35 | 72 | 17 | Steel | 6,500 | 4,250 | 11,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
| 7208 | 40 | 80 | 18 | Steel | 8,450 | 5,800 | 11,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
| 7209 | 45 | 85 | 19 | Steel | 8,000 | 5,800 | 9,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
| 7210 | 50 | 90 | 20 | Steel | 8,450 | 6,400 | 8,500 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
| 7301 | 12 | 37 | 12 | Steel | 2,350 | 1,100 | 24,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 00000 |
| 7302 | 15 | 42 | 13 | Steel | 2,900 | 1,500 | 20,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 00000 |
| 7303 | 17 | 47 | 14 | Steel | 3,550 | 1,850 | 19,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 00000 |
| 7304 | 20 | 52 | 15 | Steel | 3,900 | 2,100 | 16,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
| 7305 | 25 | 62 | 17 | Steel | 5,400 | 3,100 | 14,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
| 7306 | 30 | 72 | 19 | Steel | 7,300 | 4,300 | 12,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
| 7307 | 35 | 80 | 21 | Steel | 8,750 | 5,500 | 10,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
| 7308 | 40 | 90 | 23 | Steel | 10,300 | 6,850 | 9,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
| 7309 | 45 | 100 | 25 | Steel | 12,500 | 8,400 | 8,000 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
| 7310 | 50 | 110 | 27 | Steel | 15,400 | 10,600 | 7,500 | Required | 40° | -40° to 300° | ABEC-3 | __ | 0000000 | 000000 |
Sealed | ||||||||||||||
| 7200-2RS | 10 | 30 | 9 | Steel | 1,150 | 580 | 15,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
| 7201-2RS | 12 | 32 | 10 | Steel | 1,650 | 790 | 14,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
| 7202-2RS | 15 | 35 | 11 | Steel | 1,850 | 1,000 | 24,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
| 7203-2RS | 17 | 40 | 12 | Steel | 2,350 | 1,250 | 11,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
| 7204-2RS | 20 | 47 | 14 | Steel | 3,100 | 1,750 | 9,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
| 7205-2RS | 25 | 52 | 15 | Steel | 3,400 | 2,000 | 8,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
| 7206-2RS | 30 | 62 | 16 | Steel | 4,850 | 3,150 | 6,300 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
| 7207-2RS | 35 | 72 | 17 | Steel | 6,250 | 4,250 | 5,600 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
| 7208-2RS | 40 | 80 | 18 | Steel | 7,600 | 5,250 | 5,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
| 7302-2RS | 15 | 42 | 13 | Steel | 3,150 | 1,600 | 11,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
| 7303-2RS | 17 | 47 | 14 | Steel | 3,950 | 2,000 | 13,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
| 7304-2RS | 20 | 52 | 15 | Steel | 4,550 | 2,450 | 8,500 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
| 7305-2RS | 25 | 62 | 17 | Steel | 6,250 | 3,600 | 7,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
| 7306-2RS | 30 | 72 | 19 | Steel | 7,650 | 4,950 | 6,000 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
| 7308-2RS | 40 | 90 | 23 | Steel | 11,900 | 7,750 | 4,500 | Lubricated | 40° | -20° to 230° | ABEC-1 | DIN 628-1 | 0000000 | 000000 |
Double Row | ||||||||||||||
Open | ||||||||||||||
| 3200 | 10 | 30 | 14 | Steel | 1,700 | 960 | 22,000 | Required | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 00000 |
| 3201 | 12 | 32 | 15.9 | Steel | 2,250 | 1,250 | 20,000 | Required | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 00000 |
| 3202 | 15 | 35 | 15.9 | Steel | 2,500 | 1,500 | 17,000 | Required | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 00000 |
| 3203 | 17 | 40 | 17.5 | Steel | 3,200 | 1,950 | 15,000 | Required | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 00000 |
| 3204 | 20 | 47 | 20.6 | Steel | 4,450 | 2,650 | 14,000 | Required | 30° | -40° to 250° | ABEC-3 | __ | 00000000 | 00000 |
| 3205 | 25 | 52 | 20.6 | Steel | 4,850 | 3,200 | 12,000 | Required | 30° | -40° to 250° | ABEC-3 | __ | 00000000 | 00000 |
| 3206 | 30 | 62 | 23.8 | Steel | 6,700 | 4,550 | 10,000 | Required | 30° | -40° to 250° | ABEC-3 | __ | 00000000 | 000000 |
| 3207 | 35 | 72 | 27 | Steel | 8,950 | 6,250 | 9,000 | Required | 30° | -40° to 250° | ABEC-3 | __ | 00000000 | 000000 |
| 3208 | 40 | 80 | 30.2 | Steel | 10,600 | 7,600 | 8,000 | Required | 30° | -40° to 250° | ABEC-3 | __ | 00000000 | 000000 |
| 3210 | 50 | 90 | 30.2 | Steel | 11,400 | 8,750 | 7,000 | Required | 30° | -40° to 250° | ABEC-3 | __ | 00000000 | 000000 |
| 3303 | 17 | 47 | 22.2 | Steel | 4,850 | 2,850 | 14,000 | Required | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 00000 |
| 3304 | 20 | 52 | 22.2 | Steel | 5,300 | 3,250 | 13,000 | Required | 30° | -40° to 250° | ABEC-3 | __ | 00000000 | 000000 |
| 3305 | 25 | 62 | 25.4 | Steel | 7,150 | 4,550 | 11,000 | Required | 30° | -40° to 250° | ABEC-3 | __ | 00000000 | 000000 |
Shielded | ||||||||||||||
| 3200-2Z | 10 | 30 | 14 | Steel | 1,700 | 960 | 24,000 | Lubricated | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 000000 |
| 3201-2Z | 12 | 32 | 15.9 | Steel | 2,250 | 1,250 | 22,000 | Lubricated | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 000000 |
| 3202-2Z | 15 | 35 | 15.9 | Steel | 2,500 | 1,500 | 18,000 | Lubricated | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 000000 |
| 3203-2Z | 17 | 40 | 17.5 | Steel | 3,200 | 1,950 | 16,000 | Lubricated | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 00000 |
| 3204-2Z | 20 | 47 | 20.6 | Steel | 4,450 | 2,650 | 14,000 | Lubricated | 30° | -40° to 300° | ABEC-3 | __ | 00000000 | 000000 |
| 3205-2Z | 25 | 52 | 20.6 | Steel | 4,850 | 3,200 | 12,000 | Lubricated | 30° | -40° to 300° | ABEC-3 | __ | 00000000 | 000000 |
| 3206-2Z | 30 | 62 | 23.8 | Steel | 6,700 | 4,550 | 10,000 | Lubricated | 30° | -40° to 250° | ABEC-3 | __ | 00000000 | 000000 |
| 3207-2Z | 35 | 72 | 27 | Steel | 8,950 | 6,250 | 9,000 | Lubricated | 30° | -40° to 300° | ABEC-3 | __ | 00000000 | 000000 |
| 3208-2Z | 40 | 80 | 30.2 | Steel | 10,600 | 7,600 | 8,000 | Lubricated | 30° | -40° to 300° | ABEC-3 | __ | 00000000 | 000000 |
| 3210-2Z | 50 | 90 | 30.2 | Steel | 11,400 | 8,750 | 7,000 | Lubricated | 30° | -40° to 300° | ABEC-3 | __ | 00000000 | 000000 |
| 3303-2Z | 17 | 47 | 22.2 | Steel | 4,850 | 2,850 | 14,000 | Lubricated | 30° | -40° to 250° | ABEC-1 | __ | 00000000 | 000000 |
| 3304-2Z | 20 | 52 | 22.2 | Steel | 5,300 | 2,250 | 13,000 | Lubricated | 30° | -40° to 300° | ABEC-3 | __ | 00000000 | 000000 |
| 3305-2Z | 25 | 62 | 25.4 | Steel | 7,150 | 4,550 | 11,000 | Lubricated | 30° | -40° to 300° | ABEC-3 | __ | 00000000 | 000000 |
Sealed | ||||||||||||||
| 3200-2RS | 10 | 30 | 14 | Steel | 1,700 | 960 | 17,000 | Lubricated | 30° | -40° to 210° | ABEC-1 | __ | 00000000 | 000000 |
| 3201-2RS | 12 | 32 | 15.9 | Steel | 2,250 | 1,250 | 15,000 | Lubricated | 30° | -40° to 210° | ABEC-1 | __ | 00000000 | 000000 |
| 3202-2RS | 15 | 35 | 15.9 | Steel | 2,500 | 1,500 | 14,000 | Lubricated | 30° | -40° to 210° | ABEC-1 | __ | 00000000 | 000000 |
| 3203-2RS | 17 | 40 | 17.5 | Steel | 3,200 | 1,950 | 12,000 | Lubricated | 30° | -40° to 210° | ABEC-1 | __ | 00000000 | 00000 |
| 3204-2RS | 20 | 47 | 20.6 | Steel | 4,450 | 2,650 | 10,000 | Lubricated | 30° | -40° to 210° | ABEC-3 | __ | 00000000 | 000000 |
| 3205-2RS | 25 | 52 | 20.6 | Steel | 4,850 | 3,200 | 8,500 | Lubricated | 30° | -40° to 210° | ABEC-3 | __ | 00000000 | 000000 |
| 3206-2RS | 30 | 62 | 23.8 | Steel | 6,700 | 4,550 | 7,500 | Lubricated | 30° | -40° to 210° | ABEC-3 | __ | 00000000 | 000000 |
| 3207-2RS | 35 | 72 | 27 | Steel | 8,950 | 6,250 | 6,300 | Lubricated | 30° | -40° to 210° | ABEC-3 | __ | 00000000 | 000000 |
| 3208-2RS | 40 | 80 | 30.2 | Steel | 10,600 | 7,600 | 5,600 | Lubricated | 30° | -40° to 210° | ABEC-3 | __ | 00000000 | 000000 |
| 3210-2RS | 50 | 90 | 30.2 | Steel | 11,400 | 8,750 | 4,800 | Lubricated | 30° | -40° to 210° | ABEC-3 | __ | 00000000 | 000000 |
| 3303-2RS | 17 | 47 | 22.2 | Steel | 4,850 | 2,850 | 11,000 | Lubricated | 30° | -40° to 210° | ABEC-1 | __ | 00000000 | 000000 |
| 3304-2RS | 20 | 52 | 22.2 | Steel | 5,300 | 2,250 | 9,000 | Lubricated | 30° | -40° to 210° | ABEC-3 | __ | 00000000 | 000000 |
| 3305-2RS | 25 | 62 | 25.4 | Steel | 7,150 | 4,550 | 7,500 | Lubricated | 30° | -40° to 210° | ABEC-3 | __ | 00000000 | 000000 |
High-Speed Angular-Contact Thrust Ball Bearings
Open
Sealed
An ABEC-7 rating means these bearings are made to some of the tightest tolerances, so they operate at the highest speeds.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than open bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Combined Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Contact Angle | Temp. Range, °F | ABEC Rating | Each | |
Single Row | |||||||||||||
Open | |||||||||||||
| 7001 | 12 | 28 | 8 | Steel | 1,000 | 420 | 67,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 0000000 |
| 7002 | 15 | 32 | 9 | Steel | 1,150 | 530 | 56,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 000000 |
| 7003 | 17 | 35 | 10 | Steel | 1,500 | 710 | 50,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 000000 |
| 7004 | 20 | 42 | 12 | Steel | 1,950 | 960 | 43,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 000000 |
| 7005 | 25 | 47 | 12 | Steel | 2,150 | 1,150 | 36,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 000000 |
| 7006 | 30 | 55 | 13 | Steel | 3,200 | 1,750 | 32,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 000000 |
| 7007 | 35 | 62 | 14 | Steel | 3,500 | 2,100 | 24,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 000000 |
| 7008 | 40 | 68 | 15 | Steel | 3,750 | 2,450 | 20,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 000000 |
| 7009 | 45 | 75 | 16 | Steel | 6,400 | 5,000 | 19,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 000000 |
| 7010 | 50 | 80 | 16 | Steel | 6,650 | 5,350 | 17,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 000000 |
| 7200 | 10 | 30 | 9 | Steel | 1,250 | 580 | 57,500 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
| 7201 | 12 | 32 | 10 | Steel | 1,850 | 860 | 52,300 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
| 7202 | 15 | 35 | 11 | Steel | 2,000 | 1,000 | 46,000 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
| 7203 | 17 | 40 | 12 | Steel | 2,550 | 1,300 | 40,400 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
| 7204 | 20 | 47 | 14 | Steel | 3,400 | 1,800 | 34,400 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
| 7205 | 25 | 52 | 15 | Steel | 3,900 | 2,250 | 29,900 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
| 7206 | 30 | 62 | 16 | Steel | 5,400 | 3,300 | 25,000 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
| 7207 | 35 | 72 | 17 | Steel | 7,150 | 4,450 | 21,500 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
| 7208 | 40 | 80 | 18 | Steel | 8,500 | 5,650 | 19,200 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
| 7209 | 45 | 85 | 19 | Steel | 9,650 | 6,450 | 17,700 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
| 7210 | 50 | 90 | 20 | Steel | 10,100 | 7,050 | 16,500 | Required | 15° | -40° to 245° | ABEC-7 | 0000000 | 000000 |
Sealed | |||||||||||||
| 7006 | 30 | 55 | 13 | Steel | 3,550 | 2,300 | 27,100 | Lubricated | 15° | 0° to 230° | ABEC-7 | 0000000 | 000000 |
| 7007 | 35 | 62 | 14 | Steel | 4,500 | 3,050 | 23,800 | Lubricated | 15° | 0° to 230° | ABEC-7 | 0000000 | 000000 |
| 7008 | 40 | 68 | 15 | Steel | 4,850 | 3,550 | 21,300 | Lubricated | 15° | 0° to 230° | ABEC-7 | 0000000 | 000000 |
| 7009 | 45 | 75 | 16 | Steel | 5,750 | 4,300 | 19,200 | Lubricated | 15° | 0° to 230° | ABEC-7 | 0000000 | 000000 |
| 7010 | 50 | 80 | 16 | Steel | 6,100 | 4,900 | 17,700 | Lubricated | 15° | 0° to 230° | ABEC-7 | 0000000 | 000000 |
| 7011 | 55 | 90 | 18 | Steel | 8,050 | 6,400 | 15,900 | Lubricated | 15° | 0° to 230° | ABEC-7 | 0000000 | 00000000 |
| 7012 | 60 | 95 | 18 | Steel | 8,300 | 6,850 | 14,900 | Lubricated | 15° | 0° to 230° | ABEC-7 | 0000000 | 00000000 |
| 7013 | 65 | 100 | 18 | Steel | 8,750 | 7,750 | 14,000 | Lubricated | 15° | 0° to 230° | ABEC-7 | 0000000 | 00000000 |
Ultra-Thin Ball Bearings
Open
These bearings have twice as many contact points as angular-contact ball bearings. Fit onto large-diameter hollow shafts to run air and hydraulic lines, electrical wiring, and other components through moving parts in assemblies such as index and rotary tables, packaging equipment, and robotics.
Open bearings dissipate heat more efficiently than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | Moment Load Cap., ft.-lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | Dynamic | Static | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Contact Angle | Temp. Range, °F | ABEC Rating | Each | |
Steel Ring | |||||||||||||||
Open | |||||||||||||||
| 2" | 2 1/2" | 1/4" | 510 | 680 | 790 | 1,700 | 35 | 60 | 1,500 | Required | 30° | -60° to 250° | ABEC-1F | 0000000 | 0000000 |
| 2" | 2 5/8" | 5/16" | 750 | 930 | 1,100 | 2,300 | 50 | 85 | 1,500 | Required | 30° | -60° to 250° | ABEC-1F | 0000000 | 000000 |
| 2 1/2" | 3" | 1/4" | 580 | 830 | 910 | 2,050 | 50 | 95 | 1,200 | Required | 30° | -60° to 250° | ABEC-1F | 0000000 | 000000 |
| 2 1/2" | 3 1/8" | 5/16" | 840 | 1,100 | 1,250 | 2,800 | 70 | 130 | 1,200 | Required | 30° | -60° to 250° | ABEC-1F | 0000000 | 000000 |
| 3" | 3 1/2" | 1/4" | 640 | 990 | 1,000 | 2,450 | 65 | 130 | 800 | Required | 30° | -60° to 250° | ABEC-1F | 0000000 | 000000 |
| 3" | 3 5/8" | 5/16" | 930 | 1,300 | 1,400 | 3,350 | 95 | 180 | 1,000 | Required | 30° | -60° to 250° | ABEC-1F | 0000000 | 000000 |
| 3 1/2" | 4" | 1/4" | 700 | 1,100 | 1,100 | 2,850 | 80 | 170 | 700 | Required | 30° | -60° to 250° | ABEC-1F | 0000000 | 000000 |
| 3 1/2" | 4 1/8" | 5/16" | 1,000 | 1,500 | 1,550 | 3,850 | 120 | 240 | 700 | Required | 30° | -60° to 250° | ABEC-1F | 0000000 | 000000 |
| 4" | 4 1/2" | 1/4" | 750 | 1,250 | 1,200 | 3,200 | 100 | 220 | 600 | Required | 30° | -60° to 250° | ABEC-1F | 0000000 | 000000 |
| 4" | 4 5/8" | 5/16" | 1,050 | 1,750 | 1,700 | 4,350 | 140 | 310 | 600 | Required | 30° | -60° to 250° | ABEC-1F | 0000000 | 000000 |
| 5" | 5 1/2" | 1/4" | 850 | 1,550 | 1,400 | 3,950 | 130 | 340 | 500 | Required | 30° | -60° to 250° | ABEC-1F | 0000000 | 000000 |
| 5" | 5 5/8" | 5/16" | 1,200 | 2,150 | 1,950 | 5,350 | 200 | 470 | 500 | Required | 30° | -60° to 250° | ABEC-1F | 0000000 | 00000000 |
| 6" | 6 1/2" | 1/4" | 950 | 1,900 | 1,550 | 4,700 | 180 | 490 | 300 | Required | 30° | -60° to 250° | ABEC-1F | 0000000 | 00000000 |
| 6" | 6 5/8" | 5/16" | 1,350 | 2,550 | 2,200 | 6,400 | 260 | 670 | 400 | Required | 30° | -60° to 250° | ABEC-1F | 0000000 | 00000000 |
| 7" | 7 1/2" | 1/4" | 1,000 | 2,200 | 1,700 | 5,500 | 230 | 660 | 200 | Required | 30° | -60° to 250° | ABEC-1F | 0000000 | 00000000 |
Flanged Ultra-Thin Ball Bearings
Open
Shielded
Flanged Bearing
Flanged and creating twice as many contact points as angular-contact ball bearings, these bearings ensure correct positioning within a tube or housing and resist radial loads.
440C stainless steel bearings are more corrosion resistant than steel bearings.
Open bearings dissipate heat more efficiently than shielded bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Diameter, mm | For Housing ID, mm | Width, mm | OD, mm | Thickness, mm | Dynamic | Static | Max. Speed, rpm | Lubrication | Temperature Range, °F | ABEC Rating | Each | |
Steel Ring | ||||||||||||
Open | ||||||||||||
| 10 | 15 | 3 | 16.5 | 0.8 | 190 | 95 | 17,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 000000 |
| 10 | 19 | 5 | 21 | 1 | 380 | 185 | 40,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
| 10 | 19 | 7 | 21 | 1.5 | 380 | 185 | 40,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
| 10 | 22 | 6 | 25 | 1.5 | 600 | 260 | 37,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
| 12 | 18 | 4 | 19.5 | 0.8 | 205 | 115 | 15,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
| 12 | 21 | 5 | 23 | 1.1 | 430 | 230 | 36,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
| 12 | 21 | 7 | 23 | 1.5 | 430 | 230 | 36,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
| 12 | 24 | 6 | 26.5 | 1.5 | 640 | 320 | 33,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
| 15 | 21 | 4 | 22.5 | 0.8 | 210 | 130 | 13,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
| 15 | 24 | 5 | 26 | 1.1 | 460 | 280 | 31,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
| 17 | 23 | 4 | 24.5 | 0.8 | 220 | 145 | 11,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
| 17 | 30 | 7 | 32.5 | 1.5 | 1,000 | 570 | 26,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
| 20 | 27 | 4 | 28.5 | 0.8 | 225 | 160 | 10,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
| 20 | 32 | 7 | 35 | 1.5 | 900 | 550 | 25,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
| 25 | 32 | 4 | 34 | 1 | 245 | 185 | 8,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
| 30 | 37 | 4 | 39 | 1 | 250 | 210 | 7,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
Shielded | ||||||||||||
| 10 | 15 | 4 | 16.5 | 0.8 | 190 | 95 | 15,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 10 | 19 | 5 | 21 | 1 | 380 | 180 | 34,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 10 | 22 | 6 | 25 | 1.5 | 600 | 260 | 31,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 12 | 18 | 4 | 19.5 | 0.8 | 200 | 115 | 13,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 12 | 21 | 5 | 23 | 1.1 | 430 | 230 | 30,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 12 | 21 | 7 | 23 | 1.5 | 430 | 230 | 30,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 12 | 24 | 6 | 26.5 | 1.5 | 640 | 320 | 28,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 15 | 21 | 4 | 22.5 | 0.8 | 210 | 130 | 11,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 15 | 24 | 5 | 26 | 1.1 | 460 | 280 | 26,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 15 | 24 | 7 | 26 | 1.5 | 460 | 280 | 26,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 15 | 28 | 7 | 30.5 | 1.5 | 970 | 500 | 24,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 17 | 23 | 4 | 24.5 | 0.8 | 220 | 145 | 9,500 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 17 | 26 | 5 | 28 | 1.1 | 500 | 320 | 24,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 17 | 30 | 7 | 32.5 | 1.5 | 1,000 | 570 | 22,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 20 | 27 | 4 | 28.5 | 0.8 | 225 | 160 | 8,500 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 20 | 32 | 7 | 35 | 1.5 | 900 | 550 | 21,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 20 | 37 | 9 | 40 | 2 | 1,400 | 820 | 19,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 25 | 37 | 7 | 40 | 1.5 | 960 | 550 | 18,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 25 | 42 | 9 | 45 | 2 | 1,550 | 1,000 | 16,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 30 | 42 | 7 | 45 | 1.5 | 1,000 | 770 | 15,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 30 | 47 | 9 | 50 | 2 | 1,600 | 1,120 | 14,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
440C Stainless Steel Ring | ||||||||||||
Open | ||||||||||||
| 10 | 15 | 3 | 16.5 | 0.8 | 150 | 75 | 17,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
| 10 | 19 | 5 | 21 | 1 | 300 | 150 | 40,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
| 15 | 21 | 4 | 22.5 | 0.8 | 165 | 100 | 13,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
| 15 | 28 | 7 | 30.5 | 1.5 | 770 | 400 | 29,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 00000 |
Shielded | ||||||||||||
| 10 | 15 | 4 | 16.5 | 0.8 | 150 | 75 | 15,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 10 | 19 | 5 | 21 | 1 | 300 | 150 | 34,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 10 | 19 | 7 | 21 | 1.5 | 300 | 150 | 34,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 10 | 22 | 6 | 25 | 1.5 | 480 | 215 | 31,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 12 | 18 | 4 | 19.5 | 0.8 | 165 | 95 | 13,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 12 | 21 | 5 | 23 | 1.1 | 340 | 185 | 30,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 12 | 24 | 6 | 26.5 | 1.5 | 510 | 260 | 28,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 15 | 24 | 5 | 26 | 1.1 | 370 | 220 | 26,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
| 15 | 28 | 7 | 30.5 | 1.5 | 770 | 400 | 24,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |