We will reply to your message within an hour.
More
Also known as black-annealed wire.
This wire is zinc galvanized for good corrosion resistance.
Coated with PVC for corrosion resistance, this carbon steel wire will stand up to outdoor use.
The lead additive acts as a lubricant, which allows 12L14 carbon steel to withstand very fast machining. It's used to fabricate a wide variety of machine parts.
The same steel used in automobile bodies, this AHSS (advanced high-strength steel) allows you to fabricate high-strength parts using thinner material than you could with other types of steel. It is formable, weldable, and more economical than alloy steel.
Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as gears, axles, shafts, collets, and die holders. It resists fracturing from repeated stress.
The thickness is oversized for finishing to your exact requirements.
Ready for turning in your lathe, these rods are precision ground and held to a strict straightness tolerance.
Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as axles, shafts, collets, and die holders. It resists fracturing from repeated stress.
4130 alloy steel has a low carbon content for good weldability. It's often used for gears, fasteners, and structural applications.
Also known as chrome steel, 52100 is an extremely hard and wear-resistant material. It’s used for parts such as bearings, bushings, and punches.
Also known as chrome steel, 52100 is an extremely hard and wear-resistant material. This wire is often used for small-diameter bearings, bushings, and punches.
Use for power transmission and structural applications that involve extreme impact, heat, and wear.
Often used for gears, shafts, and ball screws, 4150 alloy steel resists wear from friction and abrasion.
Offering excellent resistance to cracking from impact and compression, C300 alloy steel is often used for dies and tooling. It is also known as maraging steel and VascoMax.
These sheets have a softened temper, which is also known as annealed, so they can be easily formed into shape and then heat treated for spring properties.
Containing more carbon than low-carbon steel—but less than 1095 spring steel—1050 spring steel is easily formed into parts such as washers, brackets, and springs before being hardened for use.
From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.
Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.
When compared to standard 304 stainless steel, this material can be machined faster with less wear on cutting tools. It's also called Prodec and Project 70+.
This material has tighter tolerances than standard 304 stainless steel.
Bend this wire and it will stay put. It’s frequently used as tying wire and locking wire.
Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools.
This material has tighter tolerances than standard 303 stainless steel.
Use 430 stainless steel in decorative and light structural applications, rather than outdoors or in extreme temperatures.
One side of these sheets has a brushed finish with grain lines running in one direction to mask fingerprints.
When bent, this wire will stay in place. It's widely used as tying and locking wire.
Offering outstanding resistance to surface wear and corrosion, Nitronic 60 stainless steel is often used for shafts, fasteners, and valves.
The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.
This material is precision ground to offer tighter tolerances than standard 316 stainless steel.
This material machines faster with less wear on cutting tools than standard 316 stainless steel. It's also called Prodec and Project 70+.
These rods have been passivated for enhanced corrosion resistance.
One side of these sheets is polished to either a brushed or mirror-like finish.
Bend this wire and it will stay in place. It's widely used as tying and locking wire.
2205 stainless steel resists cracking even when faced with a combination of tensile stress, corrosive chemicals, and heat. Also known as duplex stainless steel, it has twice the strength of 316 stainless steel. Use it for high-pressure applications in caustic environments.
Stronger and more corrosion resistant than 316 stainless steel, Nitronic 50 is especially well-suited for use as shafts and fixtures in marine environments.
A high nickel content allows Alloy 20 stainless steel to stand up to harsh chemicals in caustic environments. It's also known as Carpenter 20.
The width and thickness are oversized for finishing to your exact requirements.
One of the hardest types of stainless steel after heat treating, 440C offers excellent wear and abrasion resistance. It's often used for bearings, valves, and knife blades.
Ready for turning in your lathe, these rods are precision ground to a tight tolerance.
Precision ground on the top and bottom to a tight tolerance.
Often used for fasteners and valves, 410 stainless steel withstands wear caused by abrasion.
Bend this wire and it will stay in place. It's commonly used as tying and locking wire.
One of the most machinable types of stainless steel available, 416 contains sulfur for fast machining without clogging cutting tools. It's used for gears, screws, and shafts.
Precision ground to a tight diameter tolerance, these rods are all set for turning applications in a lathe.
The addition of vanadium and carbon gives 420V stainless steel excellent wear resistance. It can replace tool steel in highly abrasive applications.
Also called flat stock, these precision-ground bars are held to tight thickness and width tolerances.
Suitable for making molds, 420 stainless steel is a hard, wear-resistant material that can be finely polished to a very smooth surface.
With excellent strength and wear resistance, S30V stainless steel is a preferred material for knives and cutlery.
With a higher chromium content than 15-5 PH stainless steel, this high-strength 17-4 PH offers better corrosion resistance. It is also known as 630 stainless steel.
Each piece is precision ground to offer tighter tolerances than standard 17-4 PH stainless steel.
Also known as Project 70+, this material machines faster with less wear on cutting tools than standard 17-4 PH stainless steel.
Widely used to fabricate fasteners and engine components, A286 will maintain its strength as temperatures rise.
Offering outstanding strength, 15-5 PH stainless steel is often used for gears and shafts.
As the most formable of all the PH-grade materials, 17-7 PH stainless steel is widely used in the aerospace industry for intricate parts. When hardened, this material strengthens to make it resist distortion.
13-8 PH stainless steel can be hardened at lower temperatures than other heat-treatable types of stainless steel. It is widely used for fittings, pins, and lock washers.
The titanium content of 321 stainless steel preserves corrosion resistance around weld points.
Able to withstand temperatures up to 2100° F, 330 stainless steel is widely used as components for industrial furnaces, gas turbines, and boilers. It resists cracking when exposed to heating and cooling cycles.
309/310 stainless steel has high levels of chromium and nickel to provide good corrosion resistance at elevated temperatures. It's often used in heat exchangers and furnaces.
These sheets and bars are precision ground to a tight thickness tolerance.
The thickness, length, and width are oversized for finishing to your exact requirements.
Precision ground and held to a strict straightness tolerance, these rods are ready for turning in your lathe.
An oversized diameter allows for finishing to your exact requirements.
These precision-ground sheets and bars are held to a tight thickness tolerance.
With an oversized thickness, length, and width, these bars can be finished to your exact requirements.
Ready for turning in a lathe, these rods are precision ground to a tight diameter tolerance.
Ready for turning in a lathe, these precision-ground rods have a tight diameter tolerance and are held to a strict straightness tolerance.
The thickness on these bars is precision ground to a tight tolerance.
All set for turning in your lathe, these precision-ground rods are held to a strict straightness tolerance.
Also known as flat stock, these bars have an oversized thickness, length, and width for finishing to your exact requirements.
The diameter on these rods is precision ground while the straightness is held to a strict tolerance, so they're ready for turning in a lathe.
These W1 bars have lower amounts of alloy elements than other tool steels for excellent machinability.
Ground and held to strict diameter and straightness tolerances, these rods are ready to be turned in a lathe.
An oversized diameter on these rods allows for finishing to your exact requirements.
Resistant to wear, abrasion, and chipping, A11 is a hard material that is often made into punches and stamping tools.
Cut this stock into custom shapes to fit your application.
Keep shim stock in a variety of thicknesses on hand with these sets. Cut into custom shapes to fit your application.
A durable acrylic adhesive keeps this shim stock from sliding out of place. Cut it into custom shapes to fit your application.
Cut this shim stock into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need.
Send us a drawing, and we'll cut your custom shim.
Send us a drawing, and we'll cut your custom shim. Shims are made of layers of metal bonded with adhesive; remove layers with a utility knife until you get the thickness you need.