Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. They have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation.

See what’s flowing through your line with this clear pipe. Since it’s Schedule 80, this pipe has thicker, stronger walls than standard-wall pipe, so you can use it for heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation.

Connect these fittings to Schedule 40 plastic pipe—they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.

See inside your line with this clear pipe, which works in a variety of residential and commercial low-pressure plumbing and water supply applications.

Use for pressures up to 200 psi. Also known as insert fittings, these slide into semi-flexible plastic pipe and secure with a clamp.

Connect to barbed plastic pipe fittings with a clamp. Pipe isn't as bendable as soft tubing, but can still bend around objects, resulting in fewer connection points in your line. Fewer connection points not only shortens installation time, but also allows for smoother flow through the line.

Connect to CPVC pipe for use in high-temperature plumbing and water supply applications.

The inside of these fittings won’t leach contaminants into your line or accumulate particles—they’re polished to an ultra-smooth 12 Ra finish, which also makes it easy to clean. Made of polypropylene, they resist organic solvents, acids, and alkalis better than CPVC fittings.

The inside of these flanges won’t leach contaminants into your line or accumulate particles—they’re polished to an ultra-smooth 12 Ra finish, which also makes them easy to clean. Made of polypropylene, they resist organic solvents, acids, and alkalis better than CPVC pipe flanges.

Use this pipe in gravity-flow applications that involve highly-corrosive chemicals–it is NSF certified for use in corrosive waste systems. Pipe is made of CPVC, which has better chemical resistance than ABS plastic to stand up to acids and other harsh substances.

Made of PVDF, also known as Kynar, these fittings stand up to the harsh chemicals used to clean food processing lines. Unlike other plastic fittings, such as nylon and acetal fittings, they’ll resist degrading when exposed to strong alkali and highly acidic solutions.

Fittings meet NSF/ANSI Standard 61 for drinking (potable) water.

Use these nuts with brass compression fittings to create a seal on plastic tubing. They meet NSF/ANSI 61 for use with drinking water.

Connect these fittings to tubing with a ring and a crimping tool (both sold separately). Safe to use with drinking water, these fittings meet the strict standards of NSF/ANSI 61.

Create a push-to-connect junction in equipment with these fittings. To install, drill a stepped hole in your surface, push the fitting components into place, then insert your tubing.

Connect hot food and beverage lines with just a push. Also known as instant fittings, they have an internal gripping ring and an O-ring that hold tight to tubing.

Fittings can withstand temperatures up to 200° F.

These plastic compression fittings meet NSF/ANSI Standard 51 for food contact.

Crimp these fittings to copper tubing with a crimping tool for a leak-tight connection that doesn’t require heat or soldering. They are comparable to Viega ProPress fittings.

Made of plastic, these fittings are lightweight compared to our brass push-to-connect fittings.

Safe for automated on/off control in drinking-water systems, these valves meet NSF/ANSI Standard 61.

These valves have threaded NPT connections.

For a permanent, leak-tight connection that doesn’t require heat or soldering, these valves have press-connect fittings that crimp to copper tubing. Install them with a press-connect crimping tool. These valves meet NSF/ANSI 61 for use in drinking water systems.

Start and stop flow to your drinking water system without worrying about leaks. These valves have a compression sleeve that bites into tubing as you tighten the nut.

For quick and easy access to your line, these valves attach to pipe with a clamp that fits around their grooved ends. They’re also known as Victaulic valves.

Made of brass, these valves are more durable than plastic valves. Push tubing into the fittings and an internal gripping ring and O-ring hold it tight—no heat, solder, or flux required. These valves meet NSF/ANSI 61 for use in drinking water systems.

Service these valves without cutting soldered connections. The three-piece bolted body disassembles to access internal components, so you can clean and repair these valves without removing them from your line. They meet NSF/ANSI 61 for safe use in drinking water systems.

Insert unthreaded pipe into the socket ends and bond with primer and cement to create a permanent, leak-tight connection. These valves meet NSF/ANSI 61, which means they’re safe to use with drinking water systems.

Insert your tubing into the fittings of these valves with just a push—the internal rings will grip it tight. Made of plastic, these valves are a lightweight alternative to metal valves. All meet NSF/ANSI 61 for safe use with drinking water.

Barbs grip onto tubing to give these valves a secure hold. These valves meet NSF/ANSI 61, so they’re safe to use with drinking water.

Made of metal, these valves are more durable than plastic valves and withstand higher temperatures. A compression sleeve bites into tubing as you tighten the nut, forming a strong seal.

Certified to meet NSF/ANSI 61, these valves control the flow of drinking water. With universally compatible threads, they’ll connect to any garden hose or garden hose fittings.

A threaded union on these valves makes them easy to install and remove without disrupting your line. They meet NSF/ANSI 61 for safe use in drinking water systems.

Made of plastic, these valves won’t pit or corrode on the inside like metal valves, and they’re lighter in weight. They meet NSF/ANSI 61 for use with drinking water.