To speed cure time on coated fasteners, aluminum, stainless steel, or titanium, apply these primers before using threadlocker or retaining compound. They also work with no-mix acrylic adhesives.

Primers in brush-top bottles also include a spray head for easy dispensing.

PTFE provides a slippery surface that keeps threads from binding. These sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.

Sealants with low locking strength prevent threads from loosening due to vibration and can be adjusted without tools.

To adhere to safety standards for drinking water systems, use sealants that meet NSF/ANSI 61.

Apply this thread sealant stick without a mess. It contains PTFE, which provides a slippery surface that keeps threads from binding. Since the sealant is anaerobic, it doesn’t begin to harden until coated surfaces are threaded together, blocking exposure to air. It has low locking strength, so it prevents threads from loosening due to vibration and can be adjusted without tools. It meets NSF/ANSI 61 for use with drinking water.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

Apply these thread sealant sticks without a mess. They contain PTFE, which provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.

Formulated to flow into small spaces, use these sealants between fine threads. Threads coated with these sealants can be installed multiple times without recoating. They have low locking strength, so they prevent threads from loosening due to vibration and can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.

Much thicker than sealants for fine threads, these sealants bridge the gaps between coarse threads. Threads coated with these sealants can be installed multiple times without recoating. They have low locking strength, so they prevent threads from loosening due to vibration and can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.

These sealants have high locking strength, so they work in demanding applications, such as securing mounting studs in motor housings.

Room-temperature cure sealants must be mixed with water for use; they harden as the water evaporates. Mix about five parts powdered-sealant to one part water to form a thick consistency similar to peanut butter. Hardening can be accelerated with heat; do not heat to above 200° F. They require a hand tool to unthread.

1000° F max. temp. sealants expand as they harden.

1500° F max. temp. sealants are for use on cement-lined pipe joints prior to welding. The heat from the welding torch helps them begin to harden.