Ladder-Style Steps
Good for use as ladder rungs, cut these steps to size with a metal-cutting saw and weld them in place. For a clean weld, match the step material to the surface you are welding to. These steps must be welded at each end with welds capable of supporting the rated capacity. For those 5 ft. and longer, the maximum cut length is 24". Shorter lengths support higher capacities.
Galvanized steel steps require preparation before welding—grind off the coating from the part of the step you intend to weld. After welding, apply a cold galvanizing spray to the welds to protect against rust.
Serrated steps give you maximum slip resistance and allow liquids and debris to pass through. Perforated steps are less slip-resistant than serrated steps but offer a more comfortable hand grip.
Note: Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Overall | |||||
|---|---|---|---|---|---|
| Wd. (A) | Dp. (B) | Ht. (C) | Capacity | Each | |
Steel | |||||
With Serrated Tread | |||||
| 17" | 1 1/8" | 1 1/4" | 540 lbs. | 000000 | 000000 |
| 17" | 1 7/8" | 1 1/4" | 540 lbs. | 000000 | 00000 |
| 7 ft. | 1 1/8" | 1 1/4" | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | 0000000 | 000000 |
| 7 ft. | 1 7/8" | 1 1/4" | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | 000000 | 000000 |
| 20 ft. | 1 1/8" | 1 1/4" | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | 000000 | 000000 |
| 20 ft. | 1 7/8" | 1 1/4" | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | 000000 | 000000 |
With Perforated Tread | |||||
| 5 ft. | 1 1/4" | 1 1/2" | 330 lbs. for 18"-24" Cut Lengths, 450 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
| 5 ft. | 1 5/8" | 1 1/8" | 250 lbs. for 18"-24" Cut Lengths, 330 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
| 5 ft. | 2 1/4" | 1 1/2" | 570 lbs. for 18"-24" Cut Lengths, 760 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
Galvanized Steel | |||||
With Perforated Tread | |||||
| 5 ft. | 1 1/4" | 1 1/2" | 330 lbs. for 18"-24" Cut Lengths, 450 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
| 5 ft. | 1 5/8" | 1 1/8" | 250 lbs. for 18"-24" Cut Lengths, 330 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
| 5 ft. | 2 1/4" | 1 1/2" | 570 lbs. for 18"-24" Cut Lengths, 760 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
Aluminum  | |||||
With Serrated Tread | |||||
| 17" | 2" | 1 1/2" | 540 lbs. | 0000000 | 00000 |
| 7 ft. | 2" | 1 1/2" | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | 0000000 | 000000 |
With Perforated Tread | |||||
| 5 ft. | 1 1/4" | 1 1/2" | 310 lbs. for 18"-24" Cut Lengths, 410 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
| 5 ft. | 1 5/8" | 1 1/8" | 220 lbs. for 18"-24" Cut Lengths, 290 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
| 5 ft. | 2 1/4" | 1 1/2" | 540 lbs. for 18"-24" Cut Lengths, 720 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
304 Stainless Steel | |||||
With Serrated Tread | |||||
| 17" | 1 1/8" | 1 1/4" | 540 lbs. | 0000000 | 00000 |
| 7 ft. | 1 1/8" | 1 1/4" | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | 000000 | 000000 |
With Perforated Tread | |||||
| 5 ft. | 1 1/4" | 1 1/2" | 230 lbs. for 18"-24" Cut Lengths, 300 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
| 5 ft. | 2 1/4" | 1 1/2" | 380 lbs. for 18"-24" Cut Lengths, 510 lbs. Up to 18" Cut Lengths | 00000000 | 000000 |
Fold-Up Elevating Steps
Flip these steps down when you need them and fold them up out of the way when you don't.
Overall | Step | Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. (A) | Wd. (B) | Dp. (C) | Wd. | Dp. | Tread | Projection | Wt., lbs. | Material | Cap., lbs. | Mounting Hardware Included | No. of | Dia. | Ctr.-to-Ctr. Ht. | Ctr.-to-Ctr. Wd. | Each | ||
| 1 | 3 3/8" | 2 3/8" | 5 5/8" | 1" | 4 1/4" | Serrated | 5 5/8" | 1 | 304 Stainless Steel | Not Rated | No | 4 | 3/16" | 2 5/8" | 1 3/4" | 0000000 | 000000 |
| 2 | 4 1/4" | 1 5/8" | 3 1/2" | 3 1/4" | 2" | Diamond Plate | 3 1/2" | 2 | Chrome-Plated Brass | Not Rated | No | 2 | 1/4" | 3 3/8" | __ | 0000000 | 00000 |
| 2 | 4 3/8" | 1 7/8" | 3 1/2" | 3 3/8" | 2" | Diamond Plate | 3 1/2" | 1 | 316 Stainless Steel | Not Rated | No | 2 | 5/16" | 3 5/8" | __ | 0000000 | 00000 |
| 3 | 4" | 15 1/4" | 10 1/8" | 14 1/4" | 9 1/2" | Serrated | 9 1/2" | 11 | Powder-Coated Steel | 350 | No | 2 | 9/16" | __ | 13" | 0000000 | 00000 |
Step Handles
Add a hand- or foothold for easier access to your vehicle or equipment. These handles have a textured surface that’s easy to grip and keeps you from slipping.
Weld-on step handles can be installed with the side guards facing up or down. Mount them up to keep your toe from slipping; mount them down to maximize the surface area on top of the handle. For a clean weld, choose a handle that’s the same material as your mounting surface.
Note: Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Overall | Step | Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Ht. (A) | Wd. (B) | Dp. (C) | Wd. | Dp. | Tread | Projection | Wt., lbs. | Color | Mounting Hardware Included | No. of | Dia. | Ctr.-to-Ctr. Ht. | Ctr.-to-Ctr. Wd. | Assembled or Unassembled | Each | |
Bolt On | |||||||||||||||||
| Plastic | 1 5/8" | 6 3/8" | 2 1/2" | 3 1/4" | 1 1/8" | Diamond Plate | 2 1/2" | 0.22 | Black | No | 4 | 1/4" | 3/4" | 5 1/2" | Assembled | 0000000 | 00000 |
Weld On | |||||||||||||||||
| Aluminum | 1 5/8" | 7 3/4" | 4 1/8" | 7" | 1 5/8" | Diamond Plate | 4 1/8" | 1.12 | __ | __ | __ | __ | __ | __ | Assembled | 0000000 | 00000 |
| Steel | 1 3/4" | 7 3/4" | 4 1/8" | 6 3/4" | 1 5/8" | Diamond Plate | 4 1/8" | 3.2 | __ | __ | __ | __ | __ | __ | Assembled | 0000000 | 00000 |
Under-Mount Steps
Get a leg up. Weld or bolt these steps—originally designed to hang underneath trucks—to any flat horizontal surface. They’re wide and deep enough to support both feet at once to give you a stable base. They’re also serrated, so you won’t slip. And unlike fold-away options, they’re always ready to step on. Made of galvanized steel, you can use them outdoors and in harsh conditions. Rubber sides absorb impact without breaking.
Note: Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
For technical drawings and 3-D models, click on a part number.
Antislip Step Covers
Weld these covers to the rungs of your wall and tank ladders for excellent slip resistance. Covers fit square and round rungs. Can be cut with a hand grinder or miter saw using a masonry blade.
Under-Mount Foldaway Ladders
A leg up when you need it, out of the way when you don’t—these ladders slide in and out of their mounting bracket for easy access. Originally designed for trucks, weld or bolt them underneath any surface. Made of powder-coated steel, they resist rust and stand up to the elements. The perforated steps are slip resistant and easier on your shoes than serrated steps.
Note: Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Tire Steps
Safely climb truck tires for inspections and maintenance under the hood or to access cargo. They are compatible with a variety of vehicles, from standard work trucks to semi-trucks. All steps are either serrated or perforated to prevent slipping. Fold them for easy transport and storage.
Choose a three-step tire step for optimal reach to components under the hood. The third step rests on top of the tire.
Note: Check local, state, and federal codes, including OSHA, for safe operating practices.
For Wheel | Overall | Top Step | Middle Step | Bottom Step | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Steps | For Tire Size | Dia. | Wd. | Cap., lbs. | Ht. | Wd. | Dp. | Ht. | Wd. | Dp. | Wd. | Dp. | Ht. | Wd. | Dp. | Assembled or Unassembled | Material | Color | Each | |
For Truck Tires | ||||||||||||||||||||
With Serrated Steps | ||||||||||||||||||||
| 1 | 225, 255, 285, 315, 345 | 14"-20" | 9"-13 1/2" | 300 | 14 1/2" | 22" | 20"-26" | 10"-21" | 21 1/2" | 7" | __ | __ | __ | __ | __ | Unassembled | Painted Steel | Gray | 00000000 | 000000 |
For Semi-Truck Tires | ||||||||||||||||||||
With Serrated Steps | ||||||||||||||||||||
| 1 | 235, 245, 255, 265, 285, 295 | 22 1/2"-24 1/2" | 9 1/4"-11 1/2" | 400 | 16 1/2" | 29" | 21" | 25" | 29" | 7" | __ | __ | __ | __ | __ | Assembled | Powder-Coated Steel | Yellow | 00000000 | 00000 |
With Perforated Steps | ||||||||||||||||||||
| 3 | 255, 265, 275, 285, 295 | 22 1/2"-24 1/2" | 10"-11 1/2" | 400 | 24" | 14 1/2" | 28" | __ | 13" | 10" | 13" | 6" | 18" | 13 1/2" | 6" | Assembled | Painted Steel | Yellow | 0000000 | 000000 |
For Super-Single Tires | ||||||||||||||||||||
With Serrated Steps | ||||||||||||||||||||
| 1 | 385, 425, 445 | 22 1/2"-24 1/2" | 15 1/4"-17 1/2" | 400 | 16 1/2" | 29" | 25" | 25" | 29" | 7" | __ | __ | __ | __ | __ | Assembled | Powder-Coated Steel | Yellow | 00000000 | 00000 |
Wall-Mount Stairs
Stop dragging a step stool to the same place again and again—permanently mount these short stairs where you need them. Steps are serrated for maximum slip resistance. You are responsible for adhering to local, state, and federal safety codes, including OSHA.